On Wed, May 23, 2018 at 10:12 AM, Heiko Stübner <heiko@xxxxxxxxx> wrote:
> Hi Rob, Levin,
>
> sorry for being late to the party.
>
> Am Mittwoch, 23. Mai 2018, 16:43:07 CEST schrieb Rob Herring:
>> On Tue, May 22, 2018 at 9:02 PM, Levin Du <djw@xxxxxxxxxxxxx> wrote:
>> > On 2018-05-23 2:02 AM, Rob Herring wrote:
>> >> On Fri, May 18, 2018 at 11:52:05AM +0800, djw@xxxxxxxxxxxxx wrote:
>> >>> From: Levin Du <djw@xxxxxxxxxxxxx>
>> >>>
>> >>> Some GPIOs sit in the GRF_SOC_CON registers of Rockchip SoCs,
>> >>> which do not belong to the general pinctrl.
>> >>>
>> >>> Adding gpio-syscon support makes controlling regulator or
>> >>> LED using these special pins very easy by reusing existing
>> >>> drivers, such as gpio-regulator and led-gpio.
>> >>>
>> >>> Signed-off-by: Levin Du <djw@xxxxxxxxxxxxx>
>> >>>
>> >>> ---
>> >>>
>> >>> Changes in v2:
>> >>> - Rename gpio_syscon10 to gpio_mute in doc
>> >>>
>> >>> Changes in v1:
>> >>> - Refactured for general gpio-syscon usage for Rockchip SoCs.
>> >>> - Add doc rockchip,gpio-syscon.txt
>> >>>
>> >>> .../bindings/gpio/rockchip,gpio-syscon.txt | 41
>> >>>
>> >>> ++++++++++++++++++++++
>> >>>
>> >>> drivers/gpio/gpio-syscon.c | 30
>> >>>
>> >>> ++++++++++++++++
>> >>>
>> >>> 2 files changed, 71 insertions(+)
>> >>> create mode 100644
>> >>>
>> >>> Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
>> >>>
>> >>> diff --git
>> >>> a/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
>> >>> b/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
>> >>> new file mode 100644
>> >>> index 0000000..b1b2a67
>> >>> --- /dev/null
>> >>> +++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
>> >>> @@ -0,0 +1,41 @@
>> >>> +* Rockchip GPIO support for GRF_SOC_CON registers
>> >>> +
>> >>> +Required properties:
>> >>> +- compatible: Should contain "rockchip,gpio-syscon".
>> >>> +- gpio-controller: Marks the device node as a gpio controller.
>> >>> +- #gpio-cells: Should be two. The first cell is the pin number and
>> >>> + the second cell is used to specify the gpio polarity:
>> >>> + 0 = Active high,
>> >>> + 1 = Active low.
>> >>
>> >> There's no need for this child node. Just make the parent node a gpio
>> >> controller.
>> >>
>> >> Rob
>> >
>> > Hi Rob, it is not clear to me. Do you suggest that the grf node should be
>> > a
>> > gpio controller,
>> > like below?
>> >
>> > + grf: syscon at ff100000 {
>> > + compatible = "rockchip,gpio-syscon", "rockchip,rk3328-grf",
>> > "syscon", "simple-mfd";
>>
>> Yes, but drop "rockchip,gpio-syscon" and "simple-mfd".
>
> I would disagree quite a bit here. The grf are the "general register files",
> a bunch of registers used for quite a lot of things, and so it seems
> among other users, also a gpio-controller for some more random pins
> not controlled through the regular gpio controllers.
>
> For a more fully stocked grf, please see
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/rk3288.dtsi#n855
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3399.dtsi#n1338
>
> So the gpio controller should definitly also be a subnode.
Sigh, yes, if there are a bunch of functions needing subnodes like the
above, then yes that makes sense. But that's not what has been
presented. Please make some attempt at defining *all* the functions.
An actual binding would be nice, but I'll settle for just a list of
things. The list should have functions that have DT dependencies (like
clocks for phys in the above) because until you do, you don't need
child nodes.
> The gpio in question is called "mute", so I'd think the gpio-syscon driver
> should just define a "rockchip,rk3328-gpio-mute" compatible and contain
> all the register voodoo in the driver itself and not define it in the dt.
Is there really just one GPIO? If it has a defined function, then is
it really GP? Can you control direction? I know Linus W doesn't like
that kind of abuse of GPIO.
> So it should probably look like
>
> grf: syscon at ff100000 {
> compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
>
> [all the other syscon sub-devices]
>
> gpio_mute: gpio-mute {
> compatible = "rockchip,rk3328-gpio-mute";
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> [more other syscon sub-devices]
> };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
