Hi Benoit, Tony, Here is a device tree to support the OMAP4430-based Gumstix DuoVero with the Parlor expansion boards. All peripherals should be working with current 3.14-rc4, except: - GPMC ethernet (needs patches [1]) - TWL6040 init may fail (will send a bug report to ML) - The HDMI output depends on Tomi's DSS series [2] (not yet merged) I split the HDMI part into a second patch, so it can be merged with the DSS series, even if the nodes could be merged independently. Regards, Florian [1] http://thread.gmane.org/gmane.linux.ports.arm.omap/110662 [2] http://thread.gmane.org/gmane.linux.ports.arm.kernel/295881 Florian Vaussard (2): ARM: dts: Add support for OMAP4 Gumstix DuoVero/Parlor ARM: dts: duovero-parlor: Add HDMI output .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap4-duovero-parlor.dts | 182 +++++++++++++++ arch/arm/boot/dts/omap4-duovero.dtsi | 252 +++++++++++++++++++++ 4 files changed, 438 insertions(+) create mode 100644 arch/arm/boot/dts/omap4-duovero-parlor.dts create mode 100644 arch/arm/boot/dts/omap4-duovero.dtsi -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html