This series basically adds support for a QCA8334 ethernet switch to the qca8k driver. It is a four-port variant of the already supported seven port QCA8337. Register map is the same for the whole familly and all chips have the same device ID. Major part of this series enhances the CPU port setting. Currently the CPU port is not set to any sensible defaults compatible with the xGMII interface. This series forces the CPU port to its maximum bandwidth and also allows to adjust the new defaults using fixed-link device tree sub-node. Alongside these changes I fixed two checkpatch warnings regarding SPDX and redundant parentheses. Changes in v3: - Rebased on latest net-next/master. - Corrected fixed-link documentation. Michal Vokáč (7): net: dsa: qca8k: Add QCA8334 binding documentation net: dsa: qca8k: Add support for QCA8334 switch net: dsa: qca8k: Enable RXMAC when bringing up a port net: dsa: qca8k: Force CPU port to its highest bandwidth net: dsa: qca8k: Allow overwriting CPU port setting net: dsa: qca8k: Replace GPL boilerplate by SPDX net: dsa: qca8k: Remove redundant parentheses .../devicetree/bindings/net/dsa/qca8k.txt | 23 +++++++- drivers/net/dsa/qca8k.c | 64 ++++++++++++++++++---- drivers/net/dsa/qca8k.h | 7 ++- 3 files changed, 79 insertions(+), 15 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
