On 05/22/2018 03:12 PM, Andy Shevchenko wrote: > On Tue, May 22, 2018 at 5:24 PM, Dan Murphy <dmurphy@xxxxxx> wrote: >> Introduce the family of LED devices that can >> drive a torch, strobe or IR LED. >> >> The LED driver can be configured with a strobe >> timer to execute a strobe flash. The IR LED >> brightness is controlled via the torch brightness >> register. >> >> The data sheet for each the LM36010 and LM36011 >> LED drivers can be found here: >> http://www.ti.com/product/LM36010 >> http://www.ti.com/product/LM36011 >> >> Signed-off-by: Dan Murphy <dmurphy@xxxxxx> >> --- >> >> v8 - Removed OF Kconfig dependency, change strobe to flash, updated label generation, >> fixed brightness calculation, added mutex_destroy and flash_unregister - https://patchwork.kernel.org/patch/10416163/ >> >> v7 - Numerous fixes to many to list. Highlights are moved from OF APIs to device_property >> APIs, updated LED registration, timeout to reg algorithim, and fixed label generation - >> https://patchwork.kernel.org/patch/10401437/ >> v6 - This driver has been heavily modified from v5. There is no longer reading >> of individual child nodes. There are too many changes to list here see - >> https://patchwork.kernel.org/patch/10392123/ >> v5 - Fixed magic numbers, change reg cache type, added of_put_node to release >> the dt node ref, and I did not change the remove function to leave the LED in its >> state on driver removal - https://patchwork.kernel.org/patch/10391741/ >> v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/ >> v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed >> RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type, >> fixed unlock and extra semi colon in strobe_set, removed unnecessary out label >> in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/ >> v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/ >> >> >> drivers/leds/Kconfig | 9 + >> drivers/leds/Makefile | 1 + >> drivers/leds/leds-lm3601x.c | 492 ++++++++++++++++++++++++++++++++++++ >> 3 files changed, 502 insertions(+) >> create mode 100644 drivers/leds/leds-lm3601x.c >> >> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig >> index 2c896c0e69e1..d95d436e6089 100644 >> --- a/drivers/leds/Kconfig >> +++ b/drivers/leds/Kconfig >> @@ -145,6 +145,15 @@ config LEDS_LM3692X >> This option enables support for the TI LM3692x family >> of white LED string drivers used for backlighting. >> >> +config LEDS_LM3601X >> + tristate "LED support for LM3601x Chips" >> + depends on LEDS_CLASS && I2C >> + depends on LEDS_CLASS_FLASH >> + select REGMAP_I2C >> + help >> + This option enables support for the TI LM3601x family >> + of flash, torch and indicator classes. >> + >> config LEDS_LOCOMO >> tristate "LED Support for Locomo device" >> depends on LEDS_CLASS >> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile >> index 91eca81cae82..b79807fe1b67 100644 >> --- a/drivers/leds/Makefile >> +++ b/drivers/leds/Makefile >> @@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o >> obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o >> obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o >> obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o >> +obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o >> >> # LED SPI Drivers >> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o >> diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c >> new file mode 100644 >> index 000000000000..b1f0ede704c1 >> --- /dev/null >> +++ b/drivers/leds/leds-lm3601x.c >> @@ -0,0 +1,492 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +// Flash and torch driver for Texas Instruments LM3601X LED >> +// Flash driver chip family >> +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ >> + >> +#include <linux/delay.h> >> +#include <linux/i2c.h> >> +#include <linux/leds.h> >> +#include <linux/led-class-flash.h> >> +#include <linux/module.h> >> +#include <linux/regmap.h> >> +#include <linux/slab.h> >> +#include <uapi/linux/uleds.h> >> + >> +#define LM3601X_LED_IR 0x0 >> +#define LM3601X_LED_TORCH 0x1 >> + >> +/* Registers */ >> +#define LM3601X_ENABLE_REG 0x01 >> +#define LM3601X_CFG_REG 0x02 >> +#define LM3601X_LED_FLASH_REG 0x03 >> +#define LM3601X_LED_TORCH_REG 0x04 >> +#define LM3601X_FLAGS_REG 0x05 >> +#define LM3601X_DEV_ID_REG 0x06 >> + >> +#define LM3601X_SW_RESET BIT(7) >> + >> +/* Enable Mode bits */ >> +#define LM3601X_MODE_STANDBY 0x00 >> +#define LM3601X_MODE_IR_DRV BIT(0) >> +#define LM3601X_MODE_TORCH BIT(1) >> +#define LM3601X_MODE_STROBE (BIT(0) | BIT(1)) >> +#define LM3601X_STRB_EN BIT(2) >> +#define LM3601X_STRB_EDGE_TRIG BIT(3) >> +#define LM3601X_IVFM_EN BIT(4) >> + >> +#define LM36010_BOOST_LIMIT_28 BIT(5) >> +#define LM36010_BOOST_FREQ_4MHZ BIT(6) >> +#define LM36010_BOOST_MODE_PASS BIT(7) >> + >> +/* Flag Mask */ >> +#define LM3601X_FLASH_TIME_OUT BIT(0) >> +#define LM3601X_UVLO_FAULT BIT(1) >> +#define LM3601X_THERM_SHUTDOWN BIT(2) >> +#define LM3601X_THERM_CURR BIT(3) >> +#define LM36010_CURR_LIMIT BIT(4) >> +#define LM3601X_SHORT_FAULT BIT(5) >> +#define LM3601X_IVFM_TRIP BIT(6) >> +#define LM36010_OVP_FAULT BIT(7) >> + >> +#define LM3601X_MAX_TORCH_I_UA 376000 >> +#define LM3601X_MIN_TORCH_I_UA 2400 >> +#define LM3601X_TORCH_REG_DIV 2965 >> + >> +#define LM3601X_MAX_STROBE_I_UA 1500000 >> +#define LM3601X_MIN_STROBE_I_UA 11000 >> +#define LM3601X_STROBE_REG_DIV 11800 >> + >> +#define LM3601X_TIMEOUT_MASK 0x1e >> +#define LM3601X_ENABLE_MASK (LM3601X_MODE_IR_DRV | LM3601X_MODE_TORCH) >> + >> +#define LM3601X_LOWER_STEP_US 40000 >> +#define LM3601X_UPPER_STEP_US 200000 >> +#define LM3601X_MIN_TIMEOUT_US 40000 >> +#define LM3601X_MAX_TIMEOUT_US 1600000 >> +#define LM3601X_TIMEOUT_XOVER_US 400000 >> + >> +enum lm3601x_type { >> + CHIP_LM36010 = 0, >> + CHIP_LM36011, >> +}; >> + >> +/** >> + * struct lm3601x_led - >> + * @fled_cdev: flash LED class device pointer >> + * @client: Pointer to the I2C client >> + * @regmap: Devices register map >> + * @lock: Lock for reading/writing the device >> + * @led_name: LED label for the Torch or IR LED >> + * @flash_timeout: the timeout for the flash >> + * @last_flag: last known flags register value >> + * @torch_current_max: maximum current for the torch >> + * @flash_current_max: maximum current for the flash >> + * @max_flash_timeout: maximum timeout for the flash >> + * @led_mode: The mode to enable either IR or Torch >> + */ >> +struct lm3601x_led { >> + struct led_classdev_flash fled_cdev; >> + struct i2c_client *client; >> + struct regmap *regmap; >> + struct mutex lock; >> + >> + char led_name[LED_MAX_NAME_SIZE]; >> + >> + unsigned int flash_timeout; >> + unsigned int last_flag; >> + >> + u32 torch_current_max; >> + u32 flash_current_max; >> + u32 max_flash_timeout; >> + >> + u32 led_mode; >> +}; >> + >> +static const struct reg_default lm3601x_regmap_defs[] = { >> + { LM3601X_ENABLE_REG, 0x20 }, >> + { LM3601X_CFG_REG, 0x15 }, >> + { LM3601X_LED_FLASH_REG, 0x00 }, >> + { LM3601X_LED_TORCH_REG, 0x00 }, >> +}; >> + >> +static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg) >> +{ >> + switch (reg) { >> + case LM3601X_FLAGS_REG: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static const struct regmap_config lm3601x_regmap = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + >> + .max_register = LM3601X_DEV_ID_REG, >> + .reg_defaults = lm3601x_regmap_defs, >> + .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs), >> + .cache_type = REGCACHE_RBTREE, >> + .volatile_reg = lm3601x_volatile_reg, >> +}; >> + > >> +static struct lm3601x_led *fled_cdev_to_led( >> + struct led_classdev_flash *fled_cdev) > > Didn't notice before. This will look much better in one line. Gives LTL warning. > >> +{ >> + return container_of(fled_cdev, struct lm3601x_led, fled_cdev); >> +} >> + >> +static int lm3601x_read_faults(struct lm3601x_led *led) >> +{ >> + int flags_val; >> + int ret; >> + >> + ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val); >> + if (ret < 0) >> + return -EIO; >> + >> + led->last_flag = 0; >> + >> + if (flags_val & LM36010_OVP_FAULT) >> + led->last_flag |= LED_FAULT_OVER_VOLTAGE; >> + >> + if (flags_val & (LM3601X_THERM_SHUTDOWN | LM3601X_THERM_CURR)) >> + led->last_flag |= LED_FAULT_OVER_TEMPERATURE; >> + >> + if (flags_val & LM3601X_SHORT_FAULT) >> + led->last_flag |= LED_FAULT_SHORT_CIRCUIT; >> + >> + if (flags_val & LM36010_CURR_LIMIT) >> + led->last_flag |= LED_FAULT_OVER_CURRENT; >> + >> + if (flags_val & LM3601X_UVLO_FAULT) >> + led->last_flag |= LED_FAULT_UNDER_VOLTAGE; >> + >> + if (flags_val & LM3601X_IVFM_TRIP) >> + led->last_flag |= LED_FAULT_INPUT_VOLTAGE; >> + >> + if (flags_val & LM3601X_THERM_SHUTDOWN) >> + led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE; >> + >> + return led->last_flag; >> +} >> + >> +static int lm3601x_brightness_set(struct led_classdev *cdev, >> + enum led_brightness brightness) >> +{ >> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev); >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); >> + int ret, led_mode_val; >> + >> + mutex_lock(&led->lock); >> + >> + ret = lm3601x_read_faults(led); >> + if (ret < 0) >> + goto out; >> + >> + if (led->led_mode == LM3601X_LED_TORCH) >> + led_mode_val = LM3601X_MODE_TORCH; >> + else >> + led_mode_val = LM3601X_MODE_IR_DRV; >> + >> + if (brightness == LED_OFF) { >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + led_mode_val, LED_OFF); >> + goto out; >> + } >> + >> + ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness); >> + if (ret < 0) >> + goto out; >> + >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV, >> + led_mode_val); >> +out: >> + mutex_unlock(&led->lock); >> + return ret; >> +} >> + >> +static int lm3601x_flash_set(struct led_classdev_flash *fled_cdev, >> + bool state) >> +{ >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); > >> + int timeout_reg_val = 0; > > Redundant assignment. OK > >> + int current_timeout; >> + int ret; >> + >> + mutex_lock(&led->lock); >> + >> + ret = regmap_read(led->regmap, LM3601X_CFG_REG, ¤t_timeout); >> + if (ret < 0) >> + goto out; >> + >> + if (led->flash_timeout >= LM3601X_TIMEOUT_XOVER_US) >> + timeout_reg_val = led->flash_timeout / LM3601X_UPPER_STEP_US + 0x07; >> + else >> + timeout_reg_val = led->flash_timeout / LM3601X_LOWER_STEP_US - 0x01; >> + >> + if (led->flash_timeout != current_timeout) >> + ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG, >> + LM3601X_TIMEOUT_MASK, timeout_reg_val); >> + >> + if (state) >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV, >> + LM3601X_MODE_STROBE); >> + else >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_STROBE, LED_OFF); >> + >> + ret = lm3601x_read_faults(led); >> +out: >> + mutex_unlock(&led->lock); >> + return ret; >> +} >> + >> +static int lm3601x_flash_brightness_set(struct led_classdev_flash *fled_cdev, >> + u32 brightness) >> +{ >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); > >> + int ret; >> + u8 brightness_val; > > Better to read reversed xmas tree order. ok > >> + >> + mutex_lock(&led->lock); >> + ret = lm3601x_read_faults(led); >> + if (ret < 0) >> + goto out; >> + >> + if (brightness == LED_OFF) { >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_STROBE, LED_OFF); >> + goto out; >> + } >> + >> + brightness_val = brightness / LM3601X_STROBE_REG_DIV; >> + >> + ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val); >> +out: >> + mutex_unlock(&led->lock); >> + return ret; >> +} >> + >> +static int lm3601x_flash_timeout_set(struct led_classdev_flash *fled_cdev, >> + u32 timeout) >> +{ >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); > >> + int ret = 0; > > Redundant variable. Removed > >> + >> + mutex_lock(&led->lock); >> + >> + led->flash_timeout = timeout; >> + >> + mutex_unlock(&led->lock); >> + >> + return ret; >> +} >> + >> +static int lm3601x_flash_get(struct led_classdev_flash *fled_cdev, >> + bool *state) >> +{ >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); >> + int ret; >> + int flash_state; >> + >> + mutex_lock(&led->lock); >> + >> + ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &flash_state); >> + if (ret < 0) >> + goto out; >> + >> + *state = flash_state & LM3601X_MODE_STROBE; >> + >> +out: >> + mutex_unlock(&led->lock); >> + return ret; >> +} >> + >> +static int lm3601x_flash_fault_get(struct led_classdev_flash *fled_cdev, >> + u32 *fault) >> +{ >> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev); >> + >> + lm3601x_read_faults(led); >> + >> + *fault = led->last_flag; >> + >> + return 0; >> +} >> + >> +static const struct led_flash_ops flash_ops = { >> + .flash_brightness_set = lm3601x_flash_brightness_set, >> + .strobe_set = lm3601x_flash_set, >> + .strobe_get = lm3601x_flash_get, >> + .timeout_set = lm3601x_flash_timeout_set, >> + .fault_get = lm3601x_flash_fault_get, >> +}; >> + >> +static int lm3601x_register_leds(struct lm3601x_led *led) >> +{ >> + struct led_classdev *led_cdev; >> + struct led_flash_setting *setting; >> + >> + led->fled_cdev.ops = &flash_ops; >> + >> + setting = &led->fled_cdev.timeout; >> + setting->min = LM3601X_MIN_TIMEOUT_US; >> + setting->max = led->max_flash_timeout; >> + setting->step = LM3601X_LOWER_STEP_US; >> + setting->val = led->max_flash_timeout; >> + >> + setting = &led->fled_cdev.brightness; >> + setting->min = LM3601X_MIN_STROBE_I_UA; >> + setting->max = led->flash_current_max; >> + setting->step = LM3601X_TORCH_REG_DIV; >> + setting->val = led->flash_current_max; >> + >> + led_cdev = &led->fled_cdev.led_cdev; >> + led_cdev->name = led->led_name; >> + led_cdev->brightness_set_blocking = lm3601x_brightness_set; >> + led_cdev->max_brightness = DIV_ROUND_UP(led->torch_current_max, >> + LM3601X_TORCH_REG_DIV); >> + led_cdev->flags |= LED_DEV_CAP_FLASH; >> + >> + return led_classdev_flash_register(&led->client->dev, &led->fled_cdev); >> +} >> + >> +static int lm3601x_parse_node(struct lm3601x_led *led, > >> + struct device_node *node) > > I don't see how it's used. Removed > >> +{ >> + struct fwnode_handle *child = NULL; >> + int ret = -ENODEV; >> + const char *name; >> + >> + child = device_get_next_child_node(&led->client->dev, child); >> + if (!child) { >> + dev_err(&led->client->dev, "No LED Child node\n"); >> + return ret; >> + } >> + >> + ret = fwnode_property_read_u32(child, "reg", &led->led_mode); >> + if (ret) { >> + dev_err(&led->client->dev, "reg DT property missing\n"); >> + goto out_err; >> + } >> + >> + if (led->led_mode > LM3601X_LED_TORCH || >> + led->led_mode < LM3601X_LED_IR) { >> + dev_warn(&led->client->dev, "Invalid led mode requested\n"); >> + ret = -EINVAL; >> + goto out_err; >> + } >> + >> + ret = fwnode_property_read_string(child, "label", &name); >> + if (ret) { >> + if (led->led_mode == LM3601X_LED_TORCH) >> + name = "torch"; >> + else >> + name = "infrared"; >> + } >> + >> + snprintf(led->led_name, sizeof(led->led_name), >> + "%s:%s", led->client->name, name); >> + >> + ret = fwnode_property_read_u32(child, "led-max-microamp", >> + &led->torch_current_max); > >> + if (ret < 0) { > > Be consistent with above or other way around. Fixed > >> + dev_warn(&led->client->dev, >> + "led-max-microamp DT property missing\n"); >> + goto out_err; >> + } >> + >> + ret = fwnode_property_read_u32(child, "flash-max-microamp", >> + &led->flash_current_max); >> + if (ret < 0) { >> + dev_warn(&led->client->dev, >> + "flash-max-microamp DT property missing\n"); >> + goto out_err; >> + } >> + >> + ret = fwnode_property_read_u32(child, "flash-max-timeout-us", >> + &led->max_flash_timeout); >> + if (ret < 0) { >> + dev_warn(&led->client->dev, >> + "flash-max-timeout-us DT property missing\n"); >> + goto out_err; >> + } >> + >> +out_err: >> + fwnode_handle_put(child); >> + return ret; >> +} >> + >> +static int lm3601x_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + struct lm3601x_led *led; > >> + int err; > > Be consistent, either err everywhere, or ret. Seems pedantic but I will change it > >> + >> + led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL); >> + if (!led) >> + return -ENOMEM; >> + >> + led->client = client; >> + i2c_set_clientdata(client, led); >> + > >> + err = lm3601x_parse_node(led, client->dev.of_node); > > Can't you use dev_fwnode() helper? > It seems it's even not used inside the function. Dropping of_node anyway it is unused > >> + if (err < 0) >> + return -ENODEV; >> + >> + led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap); >> + if (IS_ERR(led->regmap)) { >> + err = PTR_ERR(led->regmap); >> + dev_err(&client->dev, >> + "Failed to allocate register map: %d\n", err); >> + return err; >> + } >> + >> + mutex_init(&led->lock); >> + >> + return lm3601x_register_leds(led); >> +} >> + >> +static int lm3601x_remove(struct i2c_client *client) >> +{ >> + struct lm3601x_led *led = i2c_get_clientdata(client); >> + >> + led_classdev_flash_unregister(&led->fled_cdev); >> + mutex_destroy(&led->lock); >> + >> + return regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_ENABLE_MASK, >> + LM3601X_MODE_STANDBY); >> +} >> + > >> +static const struct i2c_device_id lm3601x_id[] = { >> + { "LM36010", CHIP_LM36010 }, >> + { "LM36011", CHIP_LM36011 }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(i2c, lm3601x_id); > > Are you going to use it as a pure i2c driver? If yes, I would like to hear why. > Otherwise just switch to ->probe_new(). I was going to use the id variable but with code changes I don't use it anymore so I can convert the driver. Dan > >> + >> +static const struct of_device_id of_lm3601x_leds_match[] = { >> + { .compatible = "ti,lm36010", }, >> + { .compatible = "ti,lm36011", }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match); >> + >> +static struct i2c_driver lm3601x_i2c_driver = { >> + .driver = { >> + .name = "lm3601x", >> + .of_match_table = of_lm3601x_leds_match, >> + }, >> + .probe = lm3601x_probe, >> + .remove = lm3601x_remove, >> + .id_table = lm3601x_id, >> +}; >> +module_i2c_driver(lm3601x_i2c_driver); >> + >> +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X"); >> +MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>"); >> +MODULE_LICENSE("GPL v2"); >> -- >> 2.17.0.582.gccdcbd54c >> > > > -- ------------------ Dan Murphy -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
