On Tue, May 22, 2018 at 01:16:26PM +0200, Michal Vokáč wrote: > Add support for the four-port variant of the Qualcomm QCA833x switch. > > The CPU port default link settings can be reconfigured using > a fixed-link sub-node. > > Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx> > --- > Changes in v2: > - Add commit message and document fixed-link binding. > > .../devicetree/bindings/net/dsa/qca8k.txt | 23 +++++++++++++++++++++- > 1 file changed, 22 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt > index 9c67ee4..15b9057 100644 > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt > @@ -2,7 +2,10 @@ > > Required properties: > > -- compatible: should be "qca,qca8337" > +- compatible: should be one of: > + "qca,qca8334" > + "qca,qca8337" > + > - #size-cells: must be 0 > - #address-cells: must be 1 > > @@ -14,6 +17,20 @@ port and PHY id, each subnode describing a port needs to have a valid phandle > referencing the internal PHY connected to it. The CPU port of this switch is > always port 0. > > +A CPU port node has the following optional property: s/property/node/ Otherwise, Reviewed-by: Rob Herring <robh@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
