Describe the System Error Interrupt (SEI) controller. It aggregates two
types of interrupts, wired and MSIs from respectively the AP and the
CPs, into a single SPI interrupt.
Suggested-by: Haim Boot <hayim@xxxxxxxxxxx>
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
.../bindings/interrupt-controller/marvell,sei.txt | 50 ++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
new file mode 100644
index 000000000000..689981036c30
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
@@ -0,0 +1,50 @@
+Marvell SEI (System Error Interrupt) Controller
+-----------------------------------------------
+
+Marvell SEI (System Error Interrupt) controller is an interrupt
+aggregator. It receives interrupts from several sources and aggregates
+them to a single interrupt line (an SPI) on the parent interrupt
+controller.
+
+This interrupt controller can handle up to 64 SEIs, a set comes from the
+AP and is wired while a second set comes from the CPs by the mean of
+MSIs. Each 'domain' is represented as a subnode.
+
+Required properties:
+
+- compatible: should be "marvell,armada-8k-sei".
+- reg: SEI registers location and length.
+- interrupts: identifies the parent IRQ that will be triggered.
+
+Child node 'sei-wired-controller' required properties:
+
+- marvell,sei-ranges: ranges of wired interrupts.
+- #interrupt-cells: number of cells to define an SEI wired interrupt
+ coming from the AP, should be 1. The cell is the IRQ
+ number.
+- interrupt-controller: identifies the node as an interrupt controller.
+
+Child node 'sei-msi-controller' required properties:
+
+- marvell,sei-ranges: ranges of non-wired interrupts triggered by way of
+ MSIs.
+- msi-controller: identifies the node as an MSI controller.
+
+Example:
+
+ sei: sei@3f0200 {
+ compatible = "marvell,armada-8k-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ sei_wired_controller: sei-wired-controller@0 {
+ marvell,sei-ranges = <0 21>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ sei_msi_controller: sei-msi-controller@21 {
+ marvell,sei-ranges = <21 43>;
+ msi-controller;
+ };
+ };
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
