On Mon, May 21, 2018 at 01:31:30PM +0300, Ilia Lin wrote:
> +#define SILVER_LEAD 0
> +#define GOLD_LEAD 2
Okay, two different values here, but "GOLD_LEAD" appears unused.
> + cpu_dev_silver = get_cpu_device(SILVER_LEAD);
> + if (NULL == cpu_dev_silver)
> + return -ENODEV;
> +
> + cpu_dev_gold = get_cpu_device(SILVER_LEAD);
> + if (NULL == cpu_dev_gold)
> + return -ENODEV;
get_cpu_device() takes the logical CPU number. So the above gets CPU 0
each time, and so cpu_dev_silver == cpu_dev_gold here. So what's the
point of the second get_cpu_device() ? If it's supposed to be:
cpu_dev_gold = get_cpu_device(GOLD_LEAD);
That would get CPU 2, but in terms of these defines, it doesn't make that
much sense. What exactly does "silver lead" and "gold lead" refer to in
these definitions?
> + opp_silver = dev_pm_opp_set_supported_hw(cpu_dev_silver,&versions,1);
> + if (IS_ERR(opp_silver)) {
> + dev_err(cpu_dev_silver, "Failed to set supported hardware\n");
> + ret = PTR_ERR(opp_silver);
> + goto free_np;
> + }
> +
> + opp_gold = dev_pm_opp_set_supported_hw(cpu_dev_gold,&versions,1);
> + if (IS_ERR(opp_gold)) {
> + dev_err(cpu_dev_gold, "Failed to set supported hardware\n");
> + ret = PTR_ERR(opp_gold);
> + goto free_opp_silver;
> + }
Given that cpu_dev_silver == cpu_dev_gold, doesn't the second call to
dev_pm_opp_set_supported_hw() always fail, as opp_table->supported_hw
will be set by the first call?
To me, this driver looks completely useless as it will always fail to
initialise, and I question whether this code has even been runtime
tested.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
