a recent FEC binding document update that was motivated by i.MX development revealed that ARM and PowerPC implementations in Linux did not agree on the clock names to use for the FEC nodes change clock names from "per" to "ipg" in the FEC nodes of the mpc5121.dtsi include file such that the .dts specs comply with the common FEC binding this "incompatible" change does not break operation, because - COMMON_CLK support for MPC5121/23/25 and adjusted .dts files were only introduced in Linux v3.14-rc1, no mainline release provided these specs before - if this change won't make it for v3.14, the MPC512x CCF support provides full backwards compability, and keeps operating with device trees which lack clock specs or don't match in the names Signed-off-by: Gerhard Sittig <gsi@xxxxxxx> --- arch/powerpc/boot/dts/mpc5121.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi index 2c0e1552d20b..a5a375598ed8 100644 --- a/arch/powerpc/boot/dts/mpc5121.dtsi +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -281,7 +281,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&clks MPC512x_CLK_FEC>; - clock-names = "per"; + clock-names = "ipg"; }; eth0: ethernet@2800 { @@ -291,7 +291,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <4 0x8>; clocks = <&clks MPC512x_CLK_FEC>; - clock-names = "per"; + clock-names = "ipg"; }; /* USB1 using external ULPI PHY */ -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html