On Sat, May 19, 2018 at 08:31:17PM +0200, Jernej Skrabec wrote:
> As already described in DT binding, TCON TOP is responsible for
> configuring display pipeline. In this initial driver focus is on HDMI
> pipeline, so TVE and LCD configuration is not implemented.
>
> Implemented features:
> - HDMI source selection
> - clock driver (TCON and DSI gating)
> - connecting mixers and TCONS
>
> Something similar also existed in previous SoCs, except that it was part
> of first TCON.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> ---
> drivers/gpu/drm/sun4i/Makefile | 3 +-
> drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 256 +++++++++++++++++++++
> drivers/gpu/drm/sun4i/sun8i_tcon_top.h | 20 ++
> include/dt-bindings/clock/sun8i-tcon-top.h | 11 +
> 4 files changed, 289 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> create mode 100644 drivers/gpu/drm/sun4i/sun8i_tcon_top.h
> create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h
>
> diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
> index 2589f4acd5ae..09fbfd6304ba 100644
> --- a/drivers/gpu/drm/sun4i/Makefile
> +++ b/drivers/gpu/drm/sun4i/Makefile
> @@ -16,7 +16,8 @@ sun8i-drm-hdmi-y += sun8i_hdmi_phy_clk.o
>
> sun8i-mixer-y += sun8i_mixer.o sun8i_ui_layer.o \
> sun8i_vi_layer.o sun8i_ui_scaler.o \
> - sun8i_vi_scaler.o sun8i_csc.o
> + sun8i_vi_scaler.o sun8i_csc.o \
> + sun8i_tcon_top.o
>
> sun4i-tcon-y += sun4i_crtc.o
> sun4i-tcon-y += sun4i_dotclock.o
> diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> new file mode 100644
> index 000000000000..075a356a6dfa
> --- /dev/null
> +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> @@ -0,0 +1,256 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@xxxxxxxx> */
> +
> +#include <drm/drmP.h>
> +
> +#include <dt-bindings/clock/sun8i-tcon-top.h>
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/spinlock.h>
> +
> +#include "sun8i_tcon_top.h"
> +
> +#define TCON_TOP_PORT_SEL_REG 0x1C
> +#define TCON_TOP_PORT_DE0_MSK GENMASK(1, 0)
> +#define TCON_TOP_PORT_DE1_MSK GENMASK(5, 4)
> +#define TCON_TOP_PORT_TCON_LCD0 0
> +#define TCON_TOP_PORT_TCON_LCD1 1
> +#define TCON_TOP_PORT_TCON_TV0 2
> +#define TCON_TOP_PORT_TCON_TV1 3
> +
> +#define TCON_TOP_GATE_SRC_REG 0x20
> +#define TCON_TOP_HDMI_SRC_MSK GENMASK(29, 28)
> +#define TCON_TOP_HDMI_SRC_NONE 0
> +#define TCON_TOP_HDMI_SRC_TCON_TV0 1
> +#define TCON_TOP_HDMI_SRC_TCON_TV1 2
> +#define TCON_TOP_TCON_TV1_GATE 24
> +#define TCON_TOP_TCON_TV0_GATE 20
> +#define TCON_TOP_TCON_DSI_GATE 16
> +
> +#define CLK_NUM 3
> +
> +struct sun8i_tcon_top {
> + struct clk *bus;
> + void __iomem *regs;
> + struct reset_control *rst;
> +
> + /*
> + * spinlock is used for locking access to registers from different
> + * places - tcon driver and clk subsystem.
> + */
> + spinlock_t reg_lock;
> +};
> +
> +struct sun8i_tcon_top_gate {
> + const char *name;
> + u8 bit;
> + int index;
> +};
> +
> +static const struct sun8i_tcon_top_gate gates[] = {
> + {"bus-tcon-top-dsi", TCON_TOP_TCON_DSI_GATE, CLK_BUS_TCON_TOP_DSI},
> + {"bus-tcon-top-tv0", TCON_TOP_TCON_TV0_GATE, CLK_BUS_TCON_TOP_TV0},
> + {"bus-tcon-top-tv1", TCON_TOP_TCON_TV1_GATE, CLK_BUS_TCON_TOP_TV1},
> +};
> +
> +void sun8i_tcon_top_set_hdmi_src(struct sun8i_tcon_top *tcon_top, int tcon)
> +{
> + unsigned long flags;
> + u32 val;
> +
> + if (tcon > 1) {
> + DRM_ERROR("TCON index is too high!\n");
> + return;
> + }
> +
> + spin_lock_irqsave(&tcon_top->reg_lock, flags);
> +
> + val = readl(tcon_top->regs + TCON_TOP_GATE_SRC_REG);
> + val &= ~TCON_TOP_HDMI_SRC_MSK;
> + val |= FIELD_PREP(TCON_TOP_HDMI_SRC_MSK,
> + TCON_TOP_HDMI_SRC_TCON_TV0 + tcon);
> + writel(val, tcon_top->regs + TCON_TOP_GATE_SRC_REG);
> +
> + spin_unlock_irqrestore(&tcon_top->reg_lock, flags);
> +}
> +
> +void sun8i_tcon_top_de_config(struct sun8i_tcon_top *tcon_top,
> + int mixer, enum tcon_type tcon_type, int tcon)
> +{
> + unsigned long flags;
> + u32 val, reg;
> +
> + if (mixer > 1) {
> + DRM_ERROR("Mixer index is too high!\n");
> + return;
> + }
> +
> + if (tcon > 1) {
> + DRM_ERROR("TCON index is too high!\n");
> + return;
> + }
> +
> + switch (tcon_type) {
> + case tcon_type_lcd:
> + val = TCON_TOP_PORT_TCON_LCD0 + tcon;
> + break;
> + case tcon_type_tv:
> + val = TCON_TOP_PORT_TCON_TV0 + tcon;
> + break;
> + default:
> + DRM_ERROR("Invalid TCON type!\n");
> + return;
> + }
> +
> + spin_lock_irqsave(&tcon_top->reg_lock, flags);
> +
> + reg = readl(tcon_top->regs + TCON_TOP_PORT_SEL_REG);
> + if (mixer == 0) {
> + reg &= ~TCON_TOP_PORT_DE0_MSK;
> + reg |= FIELD_PREP(TCON_TOP_PORT_DE0_MSK, val);
> + } else {
> + reg &= ~TCON_TOP_PORT_DE1_MSK;
> + reg |= FIELD_PREP(TCON_TOP_PORT_DE1_MSK, val);
> + }
> + writel(reg, tcon_top->regs + TCON_TOP_PORT_SEL_REG);
> +
> + spin_unlock_irqrestore(&tcon_top->reg_lock, flags);
> +}
> +
> +static int sun8i_tcon_top_probe(struct platform_device *pdev)
> +{
> + struct clk_hw_onecell_data *clk_data;
> + struct sun8i_tcon_top *tcon_top;
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + int ret, i;
> +
> + tcon_top = devm_kzalloc(dev, sizeof(*tcon_top), GFP_KERNEL);
> + if (!tcon_top)
> + return -ENOMEM;
> +
> + clk_data = devm_kzalloc(&pdev->dev, sizeof(*clk_data) +
> + sizeof(*clk_data->hws) * CLK_NUM,
> + GFP_KERNEL);
> + if (!clk_data)
> + return -ENOMEM;
> +
> + spin_lock_init(&tcon_top->reg_lock);
> +
> + tcon_top->rst = devm_reset_control_get(dev, "rst");
> + if (IS_ERR(tcon_top->rst)) {
> + dev_err(dev, "Couldn't get our reset line\n");
> + return PTR_ERR(tcon_top->rst);
> + }
> +
> + tcon_top->bus = devm_clk_get(dev, "bus");
> + if (IS_ERR(tcon_top->bus)) {
> + dev_err(dev, "Couldn't get the bus clock\n");
> + return PTR_ERR(tcon_top->bus);
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + tcon_top->regs = devm_ioremap_resource(dev, res);
> + if (IS_ERR(tcon_top->regs))
> + return PTR_ERR(tcon_top->regs);
> +
> + ret = reset_control_deassert(tcon_top->rst);
> + if (ret) {
> + dev_err(dev, "Could not deassert ctrl reset control\n");
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(tcon_top->bus);
> + if (ret) {
> + dev_err(dev, "Could not enable bus clock\n");
> + goto err_assert_reset;
> + }
> +
> + /*
> + * Default register values might have some reserved bits set, which
> + * prevents TCON TOP from working properly. Set them to 0 here.
> + */
> + writel(0, tcon_top->regs + TCON_TOP_PORT_SEL_REG);
> + writel(0, tcon_top->regs + TCON_TOP_GATE_SRC_REG);
> +
> + for (i = 0; i < CLK_NUM; i++) {
> + const char *parent_name = "bus-tcon-top";
I guess retrieving the parent's clock name at runtime would be more
flexible.
> + struct clk_init_data init;
> + struct clk_gate *gate;
> +
> + gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
> + if (!gate) {
> + ret = -ENOMEM;
> + goto err_disable_clock;
> + }
> +
> + init.name = gates[i].name;
> + init.ops = &clk_gate_ops;
> + init.flags = CLK_IS_BASIC;
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> +
> + gate->reg = tcon_top->regs + TCON_TOP_GATE_SRC_REG;
> + gate->bit_idx = gates[i].bit;
> + gate->lock = &tcon_top->reg_lock;
> + gate->hw.init = &init;
> +
> + ret = devm_clk_hw_register(dev, &gate->hw);
> + if (ret)
> + goto err_disable_clock;
Isn't it what clk_hw_register_gate is doing?
> + clk_data->hws[gates[i].index] = &gate->hw;
> + }
> +
> + clk_data->num = CLK_NUM;
> +
> + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
> + if (ret)
> + goto err_disable_clock;
> +
> + platform_set_drvdata(pdev, tcon_top);
> +
> + return 0;
> +
> +err_disable_clock:
> + clk_disable_unprepare(tcon_top->bus);
> +err_assert_reset:
> + reset_control_assert(tcon_top->rst);
> +
> + return ret;
> +}
> +
> +static int sun8i_tcon_top_remove(struct platform_device *pdev)
> +{
> + struct sun8i_tcon_top *tcon_top = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(tcon_top->bus);
> + reset_control_assert(tcon_top->rst);
> +
> + return 0;
> +}
> +
> +const struct of_device_id sun8i_tcon_top_of_table[] = {
> + { .compatible = "allwinner,sun8i-r40-tcon-top" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, sun8i_tcon_top_of_table);
> +
> +static struct platform_driver sun8i_tcon_top_platform_driver = {
> + .probe = sun8i_tcon_top_probe,
> + .remove = sun8i_tcon_top_remove,
> + .driver = {
> + .name = "sun8i-tcon-top",
> + .of_match_table = sun8i_tcon_top_of_table,
> + },
> +};
> +module_platform_driver(sun8i_tcon_top_platform_driver);
> +
> +MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@xxxxxxxx>");
> +MODULE_DESCRIPTION("Allwinner R40 TCON TOP driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.h b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h
> new file mode 100644
> index 000000000000..19126e07d2a6
> --- /dev/null
> +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/* Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@xxxxxxxx> */
> +
> +#ifndef _SUN8I_TCON_TOP_H_
> +#define _SUN8I_TCON_TOP_H_
> +
> +#include <linux/device.h>
> +
> +struct sun8i_tcon_top;
> +
> +enum tcon_type {
> + tcon_type_lcd,
> + tcon_type_tv,
The usual practice is to have the enum values upper-case.
Thanks!
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
