On Fri, 18 May 2018 11:28:15 -0500
Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, May 17, 2018 at 08:59:40PM +0200, Benjamin Gaignard wrote:
> > 2018-05-17 18:23 GMT+02:00 Rob Herring <robh+dt@xxxxxxxxxx>:
> > > On Wed, May 16, 2018 at 12:51 PM, William Breathitt Gray
> > > <vilhelm.gray@xxxxxxxxx> wrote:
> > >> From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> > >
> > > v6? Where's v1-v5?
> > >
> > >> Add bindings for STM32 Timer quadrature encoder.
> > >> It is a sub-node of STM32 Timer which implement the
> > >> counter part of the hardware.
> > >>
> > >> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > >> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> > >> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> > >> Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
> > >> ---
> > >> .../bindings/counter/stm32-timer-cnt.txt | 26 +++++++++++++++++++
> > >> .../devicetree/bindings/mfd/stm32-timers.txt | 7 +++++
> > >> 2 files changed, 33 insertions(+)
> > >> create mode 100644 Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt
> > >>
> > >> diff --git a/Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt b/Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt
> > >> new file mode 100644
> > >> index 000000000000..377728128bef
> > >> --- /dev/null
> > >> +++ b/Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt
> > >> @@ -0,0 +1,26 @@
> > >> +STMicroelectronics STM32 Timer quadrature encoder
> > >> +
> > >> +STM32 Timer provides quadrature encoder counter mode to detect
> > >
> > > 'mode' does not sound like a sub-block of the timers block.
> >
> > quadrature encoding is one of the counting modes of this hardware
> > block which is enable to count on other signals/triggers
>
> You don't need a child node and compatible to set a mode.
A pile of extra hardware becomes relevant and you only want
to be in this state if you have appropriate external device
wired up. In this case there is admittedly not a lot here
but some devices will look a bit more like a touchscreen controller.
They are often build on top of an ADC module, but have a load
of touch screen only signals and electrical elements that
warrant being represented as a separate node in the DT.
>
> > >> +angular position and direction of rotary elements,
> > >> +from IN1 and IN2 input signals.
> > >> +
> > >> +Must be a sub-node of an STM32 Timer device tree node.
> > >> +See ../mfd/stm32-timers.txt for details about the parent node.
> > >> +
> > >> +Required properties:
> > >> +- compatible: Must be "st,stm32-timer-counter".
> > >> +- pinctrl-names: Set to "default".
> > >> +- pinctrl-0: List of phandles pointing to pin configuration nodes,
> > >> + to set IN1/IN2 pins in mode of operation for Low-Power
> > >> + Timer input on external pin.
> > >> +
> > >> +Example:
> > >> + timers@40010000 {
> > >> + compatible = "st,stm32-timers";
> > >> + ...
> > >> + counter {
> > >> + compatible = "st,stm32-timer-counter";
> > >
> > > Is there only 1? How is the counter addressed?
> >
> > Yes there is only one counter per hardware block.
> > Counter is addressed like the two others sub-nodes and the details
> > about parent mode are describe in stm32-timers.txt
> > Should I add them here too ? so example will be like that:
>
> No, you should drop the child node and add pinctrl to the parent.
>
> Any other functions this block has that you plan on adding? Please make
> bindings as complete as possible, not what you currently have drivers
> for.
>
> > timers@40010000 {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > compatible = "st,stm32-timers";
> > reg = <0x40010000 0x400>;
> > clocks = <&rcc 0 160>;
> > clock-names = "int";
> > counter {
> > compatible = "st,stm32-timer-counter";
> > pinctrl-names = "default";
> > pinctrl-0 = <&tim1_in_pins>;
> > };
> > };
> >
> > Benjamin
> > >
> > > _______________________________________________
> > > linux-arm-kernel mailing list
> > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
