RE: [PATCH RESEND v2 1/3] usb: chipidea: msm: Add device tree binding information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, 2014-02-24 at 08:15 +0000, Peter Chen wrote: 
> > +CI13xxx (Chipidea) USB controllers
> > +
> > +Required properties:
> > +- compatible:   should contain "qcom,ci-hdrc"
> > +- reg:          offset and length of the register set in the memory map
> > +- interrupts:   interrupt-specifier for the controller interrupt.
> > +- usb-phy:      phandle for the PHY device
> > +- dr_mode:      Sould be "peripheral"
> > +
> > +	gadget@f9a55000 {
> > +		compatible = "qcom,ci-hdrc";
> > +		reg = <0xf9a55000 0x400>;
> > +		dr_mode = "peripheral";
> > +		interrupts = <0 134 0>;
> > +		usb-phy = <&usb_otg>;
> > +	};
> > +
> 
> usb_otg is not a good name for the node of usb phy.

Well, this is just an example. Is this better <&phy0>?

Regards,
Ivan


> 
> Peter
> 


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux