On Fri, May 18, 2018 at 09:27:58AM +0100, Rui Miguel Silva wrote: > > > +endpoint node > > > +------------- > > > + > > > +- data-lanes : (required) an array specifying active physical > > > MIPI-CSI2 > > > + data input lanes and their mapping to logical lanes; the > > > + array's content is unused, only its length is meaningful; Btw. do note that you may get a warning due to this from the CSI-2 bus property parsing code if the lane numbers are wrong. > > > + > > > +- fsl,csis-hs-settle : (optional) differential receiver (HS-RX) > > > settle time; > > > > Could you calculate this, as other drivers do? It probably changes > > depending on the device runtime configuration. > > The only reference to possible values to this parameter is given by > table in [0], can you point me out the formula for imx7 in the > documentation? I don't know imx7 but the other CSI-2 drivers need no such system specific configuration. -- Sakari Ailus sakari.ailus@xxxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
