This adds the new board-specific clock init in mach-davinci/dm355.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx> --- v11 changes: - none v10 changes: - none (reported problems fixed in separate patch series [1]) [1]: https://lkml.org/lkml/2018/5/9/626 v9 changes: - register PLL1 and PSC in dm355_init_time() instead of as platform device so that we get the correct timer0 clock for davinci_timer_init() - Fixed size of PLL memory block v8 changes: - none v7 changes: - add clock platform device declarations - register platform devices instead of registering clocks directly - add davinci prefix to commit description v6 changes: - add blank lines between function calls arch/arm/mach-davinci/board-dm355-evm.c | 2 + arch/arm/mach-davinci/board-dm355-leopard.c | 2 + arch/arm/mach-davinci/davinci.h | 1 + arch/arm/mach-davinci/dm355.c | 69 +++++++++++++++++---- 4 files changed, 62 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index a3377f959444..f53a461a606f 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -394,6 +394,8 @@ static __init void dm355_evm_init(void) struct clk *aemif; int ret; + dm355_register_clocks(); + ret = dm355_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 8249a0bf69f0..0fdf1d03eb11 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -234,6 +234,8 @@ static __init void dm355_leopard_init(void) struct clk *aemif; int ret; + dm355_register_clocks(); + ret = dm355_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 376cdd51ce9d..c2c634b6578e 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -84,6 +84,7 @@ int davinci_init_wdt(void); /* DM355 function declarations */ void dm355_init(void); void dm355_init_time(void); +void dm355_register_clocks(void); void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); void dm355_init_asp1(u32 evt_enable); diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 0da7516018ca..14014b942e8a 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -8,31 +8,37 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/serial_8250.h> -#include <linux/platform_device.h> + +#include <linux/clk-provider.h> +#include <linux/clk/davinci.h> +#include <linux/clkdev.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> -#include <linux/spi/spi.h> +#include <linux/init.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/spi-davinci.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/spi/spi.h> #include <asm/mach/map.h> +#include <mach/common.h> #include <mach/cputype.h> -#include "psc.h" -#include <mach/mux.h> #include <mach/irqs.h> -#include <mach/time.h> +#include <mach/mux.h> #include <mach/serial.h> -#include <mach/common.h> +#include <mach/time.h> +#include "asp.h" #include "davinci.h" -#include "clock.h" #include "mux.h" -#include "asp.h" + +#ifndef CONFIG_COMMON_CLK +#include "clock.h" +#include "psc.h" +#endif #define DM355_UART2_BASE (IO_PHYS + 0x206000) #define DM355_OSD_BASE (IO_PHYS + 0x70200) @@ -43,6 +49,7 @@ */ #define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */ +#ifndef CONFIG_COMMON_CLK static struct pll_data pll1_data = { .num = 1, .phys_base = DAVINCI_PLL1_BASE, @@ -382,7 +389,7 @@ static struct clk_lookup dm355_clks[] = { CLK(NULL, "usb", &usb_clk), CLK(NULL, NULL, NULL), }; - +#endif /*----------------------------------------------------------------------*/ static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32); @@ -1046,8 +1053,46 @@ void __init dm355_init(void) void __init dm355_init_time(void) { +#ifdef CONFIG_COMMON_CLK + void __iomem *pll1, *psc; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ); + + pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); + dm355_pll1_init(NULL, pll1, NULL); + + psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); + dm355_psc_init(NULL, psc); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +#else davinci_clk_init(dm355_clks); davinci_timer_init(&timer0_clk); +#endif +} + +static struct resource dm355_pll2_resources[] = { + { + .start = DAVINCI_PLL2_BASE, + .end = DAVINCI_PLL2_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm355_pll2_device = { + .name = "dm355-pll2", + .id = -1, + .resource = dm355_pll2_resources, + .num_resources = ARRAY_SIZE(dm355_pll2_resources), +}; + +void __init dm355_register_clocks(void) +{ + /* PLL1 and PSC are registered in dm355_init_time() */ + platform_device_register(&dm355_pll2_device); } int __init dm355_init_video(struct vpfe_config *vpfe_cfg, -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
