RE: [PATCH v5 12/14] staging: typec: tcpci: keep the not connecting cc line open

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Peter Chen
> Sent: 2018年5月16日 16:36
> To: Jun Li <jun.li@xxxxxxx>; robh+dt@xxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx;
> heikki.krogerus@xxxxxxxxxxxxxxx; linux@xxxxxxxxxxxx
> Cc: a.hajda@xxxxxxxxxxx; cw00.choi@xxxxxxxxxxx;
> shufan_lee@xxxxxxxxxxx; gsomlo@xxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-usb@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>
> Subject: RE: [PATCH v5 12/14] staging: typec: tcpci: keep the not connecting cc
> line open
> 
> 
> >
> > While set polarity, we should keep the not connecting cc line to be open.
> >
> 
> keep the disconnected cc line open?

Okay, I will change.

Thanks
Li Jun
> 
> Peter
> 
> > Signed-off-by: Li Jun <jun.li@xxxxxxx>
> > ---
> >  drivers/staging/typec/tcpci.c | 18 ++++++++++++++----
> >  1 file changed, 14 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/tcpci.c index
> > 5c48810..5c0c5e3 100644
> > --- a/drivers/staging/typec/tcpci.c
> > +++ b/drivers/staging/typec/tcpci.c
> > @@ -185,15 +185,25 @@ static int tcpci_set_polarity(struct tcpc_dev *tcpc,
> >  			      enum typec_cc_polarity polarity)  {
> >  	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> > +	unsigned int reg;
> >  	int ret;
> >
> > -	ret = regmap_write(tcpci->regmap, TCPC_TCPC_CTRL,
> > -			   (polarity == TYPEC_POLARITY_CC2) ?
> > -			   TCPC_TCPC_CTRL_ORIENTATION : 0);
> > +	/* Keep the disconnect cc line open */
> > +	ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, &reg);
> >  	if (ret < 0)
> >  		return ret;
> >
> > -	return 0;
> > +	if (polarity == TYPEC_POLARITY_CC2)
> > +		reg |= TCPC_ROLE_CTRL_CC_OPEN <<
> > TCPC_ROLE_CTRL_CC1_SHIFT;
> > +	else
> > +		reg |= TCPC_ROLE_CTRL_CC_OPEN <<
> > TCPC_ROLE_CTRL_CC2_SHIFT;
> > +	ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return regmap_write(tcpci->regmap, TCPC_TCPC_CTRL,
> > +			   (polarity == TYPEC_POLARITY_CC2) ?
> > +			   TCPC_TCPC_CTRL_ORIENTATION : 0);
> >  }
> >
> >  static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable)
> > --
> > 2.7.4

?韬{.n?????%??檩??w?{.n????z谵{???塄}?财??j:+v??????2??璀??摺?囤??z夸z罐?+?????w棹f




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux