Re: [PATCH v6 2/2] leds: lm3601x: Introduce the lm3601x LED driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dan,

On 05/15/2018 11:50 PM, Dan Murphy wrote:
Jacek

On 05/15/2018 04:24 PM, Jacek Anaszewski wrote:
Dan,

Thanks for the update. Please refer to my comments below.

On 05/15/2018 05:43 PM, Dan Murphy wrote:
Introduce the family of LED devices that can
drive a torch, strobe or IR LED.

The LED driver can be configured with a strobe
timer to execute a strobe flash.  The IR LED
brightness is controlled via the torch brightness
register.

The data sheet for each the LM36010 and LM36011
LED drivers can be found here:
http://www.ti.com/product/LM36010
http://www.ti.com/product/LM36011

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---

v6 - This driver has been heavily modified from v5.  There is no longer reading
of individual child nodes.  There are too many changes to list here see -
https://patchwork.kernel.org/patch/10392123/

v5 - Fixed magic numbers, change reg cache type, added of_put_node to release
the dt node ref, and I did not change the remove function to leave the LED in its
state on driver removal - https://patchwork.kernel.org/patch/10391741/
v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/
v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed
RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type,
fixed unlock and extra semi colon in strobe_set, removed unnecessary out label
in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/
v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/

   drivers/leds/Kconfig        |   9 +
   drivers/leds/Makefile       |   1 +
   drivers/leds/leds-lm3601x.c | 595 ++++++++++++++++++++++++++++++++++++
   3 files changed, 605 insertions(+)
   create mode 100644 drivers/leds/leds-lm3601x.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 2c896c0e69e1..50ae536f343f 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -145,6 +145,15 @@ config LEDS_LM3692X
         This option enables support for the TI LM3692x family
         of white LED string drivers used for backlighting.
   +config LEDS_LM3601X
+    tristate "LED support for LM3601x Chips"
+    depends on LEDS_CLASS && I2C && OF
+    depends on LEDS_CLASS_FLASH
+    select REGMAP_I2C
+    help
+      This option enables support for the TI LM3601x family
+      of flash, torch and indicator classes.
+
   config LEDS_LOCOMO
       tristate "LED Support for Locomo device"
       depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 91eca81cae82..b79807fe1b67 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG)        += leds-mlxreg.o
   obj-$(CONFIG_LEDS_NIC78BX)        += leds-nic78bx.o
   obj-$(CONFIG_LEDS_MT6323)        += leds-mt6323.o
   obj-$(CONFIG_LEDS_LM3692X)        += leds-lm3692x.o
+obj-$(CONFIG_LEDS_LM3601X)        += leds-lm3601x.o
     # LED SPI Drivers
   obj-$(CONFIG_LEDS_DAC124S085)        += leds-dac124s085.o
diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c
new file mode 100644
index 000000000000..fa87da5d5159
--- /dev/null
+++ b/drivers/leds/leds-lm3601x.c
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: GPL-2.0
+// Flash and torch driver for Texas Instruments LM3601X LED
+// Flash driver chip family
+// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
+
+#define LM3601X_LED_TORCH    0x0
+#define LM3601X_LED_IR        0x1
+
+/* Registers */
+#define LM3601X_ENABLE_REG    0x01
+#define LM3601X_CFG_REG        0x02
+#define LM3601X_LED_FLASH_REG    0x03
+#define LM3601X_LED_TORCH_REG    0x04
+#define LM3601X_FLAGS_REG    0x05
+#define LM3601X_DEV_ID_REG    0x06
+
+#define LM3601X_SW_RESET    BIT(7)
+
+/* Enable Mode bits */
+#define LM3601X_MODE_STANDBY    0x00
+#define LM3601X_MODE_IR_DRV    BIT(0)
+#define LM3601X_MODE_TORCH    BIT(1)
+#define LM3601X_MODE_STROBE    (BIT(0) | BIT(1))
+#define LM3601X_STRB_EN        BIT(2)
+#define LM3601X_STRB_LVL_TRIG    ~BIT(3)
+#define LM3601X_STRB_EDGE_TRIG    BIT(3)
+#define LM3601X_IVFM_EN        BIT(4)
+
+#define LM36010_BOOST_LIMIT_19    ~BIT(5)
+#define LM36010_BOOST_LIMIT_28    BIT(5)
+#define LM36010_BOOST_FREQ_2MHZ    ~BIT(6)
+#define LM36010_BOOST_FREQ_4MHZ    BIT(6)
+#define LM36010_BOOST_MODE_NORM    ~BIT(7)
+#define LM36010_BOOST_MODE_PASS    BIT(7)
+
+/* Flag Mask */
+#define LM3601X_FLASH_TIME_OUT    BIT(0)
+#define LM3601X_UVLO_FAULT    BIT(1)
+#define LM3601X_THERM_SHUTDOWN    BIT(2)
+#define LM3601X_THERM_CURR    BIT(3)
+#define LM36010_CURR_LIMIT    BIT(4)
+#define LM3601X_SHORT_FAULT    BIT(5)
+#define LM3601X_IVFM_TRIP    BIT(6)
+#define LM36010_OVP_FAULT    BIT(7)
+
+#define LM3601X_MIN_TORCH_I_UA    2400
+#define LM3601X_MIN_STROBE_I_MA    11
+
+#define LM3601X_TIMEOUT_MASK    0x1e
+#define LM3601X_ENABLE_MASK    0x03
+
+enum lm3601x_type {
+    CHIP_LM36010 = 0,
+    CHIP_LM36011,
+};
+
+/**
+ * struct lm3601x_max_timeouts -
+ * @timeout: timeout value in ms
+ * @regval: the value of the register to write
+ */
+struct lm3601x_max_timeouts {
+    int timeout;
+    int reg_val;
+};
+
+/**
+ * struct lm3601x_led -
+ * @lock: Lock for reading/writing the device
+ * @regmap: Devices register map
+ * @client: Pointer to the I2C client
+ * @led_node: DT device node for the led
+ * @cdev_torch: led class device pointer for the torch
+ * @cdev_ir: led class device pointer for infrared
+ * @fled_cdev: flash led class device pointer
+ * @led_name: LED label for the Torch or IR LED
+ * @strobe: LED label for the strobe
+ * @last_flag: last known flags register value
+ * @strobe_timeout: the timeout for the strobe
+ * @torch_current_max: maximum current for the torch
+ * @strobe_current_max: maximum current for the strobe
+ * @max_strobe_timeout: maximum timeout for the strobe
+ * @led_mode: The mode to enable either IR or Torch
+ */
+struct lm3601x_led {
+    struct mutex lock;
+    struct regmap *regmap;
+    struct i2c_client *client;
+
+    struct device_node *led_node;
+
+    struct led_classdev cdev_torch;
+    struct led_classdev cdev_ir;
+
+    struct led_classdev_flash fled_cdev;
+
+    char led_name[LED_MAX_NAME_SIZE];
+    char strobe[LED_MAX_NAME_SIZE];
+
+    unsigned int last_flag;
+    unsigned int strobe_timeout;
+
+    u32 torch_current_max;
+    u32 strobe_current_max;
+    u32 max_strobe_timeout;
+
+    int led_mode;
+};
+
+static const struct lm3601x_max_timeouts strobe_timeouts[] = {
+    { 40000, 0x00 },
+    { 80000, 0x01 },
+    { 120000, 0x02 },
+    { 160000, 0x03 },
+    { 200000, 0x04 },
+    { 240000, 0x05 },
+    { 280000, 0x06 },
+    { 320000, 0x07 },
+    { 360000, 0x08 },
+    { 400000, 0x09 },
+    { 600000, 0x0a },
+    { 800000, 0x0b },
+    { 1000000, 0x0c },
+    { 1200000, 0x0d },
+    { 1400000, 0x0e },
+    { 1600000, 0x0f },
+};
+
+static const struct reg_default lm3601x_regmap_defs[] = {
+    { LM3601X_ENABLE_REG, 0x20 },
+    { LM3601X_CFG_REG, 0x15 },
+    { LM3601X_LED_FLASH_REG, 0x00 },
+    { LM3601X_LED_TORCH_REG, 0x00 },
+};
+
+static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg)
+{
+    switch (reg) {
+    case LM3601X_FLAGS_REG:
+        return true;
+    default:
+        return false;
+    }
+}
+
+static const struct regmap_config lm3601x_regmap = {
+    .reg_bits = 8,
+    .val_bits = 8,
+
+    .max_register = LM3601X_DEV_ID_REG,
+    .reg_defaults = lm3601x_regmap_defs,
+    .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs),
+    .cache_type = REGCACHE_RBTREE,
+    .volatile_reg = lm3601x_volatile_reg,
+};
+
+static struct lm3601x_led *fled_cdev_to_led(
+                struct led_classdev_flash *fled_cdev)
+{
+    return container_of(fled_cdev, struct lm3601x_led, fled_cdev);
+}
+
+static int lm3601x_read_faults(struct lm3601x_led *led)
+{
+    int flags_val;
+    int ret;
+
+    ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val);
+    if (ret < 0)
+        return -EIO;
+
+    led->last_flag = 0;
+
+    if (flags_val & LM36010_OVP_FAULT)
+        led->last_flag |= LED_FAULT_OVER_VOLTAGE;
+
+    if (flags_val & (LM3601X_THERM_SHUTDOWN | LM3601X_THERM_CURR))
+        led->last_flag |= LED_FAULT_OVER_TEMPERATURE;
+
+    if (flags_val & LM3601X_SHORT_FAULT)
+        led->last_flag |= LED_FAULT_SHORT_CIRCUIT;
+
+    if (flags_val & LM36010_CURR_LIMIT)
+        led->last_flag |= LED_FAULT_OVER_CURRENT;
+
+    if (flags_val & LM3601X_UVLO_FAULT)
+        led->last_flag |= LED_FAULT_UNDER_VOLTAGE;
+
+    if (flags_val & LM3601X_IVFM_TRIP)
+        led->last_flag |= LED_FAULT_INPUT_VOLTAGE;
+
+    if (flags_val & LM3601X_THERM_SHUTDOWN)
+        led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE;
+
+    return led->last_flag;
+}
+
+static int lm3601x_brightness_set(struct led_classdev *cdev,
+                    enum led_brightness brightness)
+{
+    struct lm3601x_led *led =
+        container_of(cdev, struct lm3601x_led, cdev_torch);
+    u8 brightness_val;
+    int ret, led_mode_val;
+
+    mutex_lock(&led->lock);
+
+    ret = lm3601x_read_faults(led);
+    if (ret < 0)
+        goto out;
+
+    if (led->led_mode == LM3601X_LED_TORCH)
+        led_mode_val = LM3601X_MODE_TORCH;
+    else
+        led_mode_val = LM3601X_MODE_IR_DRV;
+
+    if (brightness == LED_OFF) {
+        ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                    led_mode_val, LED_OFF);
+        goto out;
+    }
+
+    if (brightness == LED_ON)
+        brightness_val = LED_ON;
+    else
+        brightness_val = (brightness/2);
+
+    ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness_val);
+    if (ret < 0)
+        goto out;
+
+    ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                    led_mode_val,
+                    led_mode_val);
+
+out:
+    mutex_unlock(&led->lock);
+    return ret;
+}
+
+static int lm3601x_strobe_set(struct led_classdev_flash *fled_cdev,
+                bool state)
+{
+    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+    int ret;
+    int current_timeout;
+    int reg_count;
+    int i;
+    int timeout_reg_val = 0;
+
+    mutex_lock(&led->lock);
+
+    ret = regmap_read(led->regmap, LM3601X_CFG_REG, &current_timeout);
+    if (ret < 0)
+        goto out;
+
+    reg_count = ARRAY_SIZE(strobe_timeouts);
+    for (i = 0; i < reg_count; i++) {
+        if (led->strobe_timeout > strobe_timeouts[i].timeout)
+            continue;
+
+        if (led->strobe_timeout <= strobe_timeouts[i].timeout) {
+            timeout_reg_val = (strobe_timeouts[i].reg_val << 1);
+            break;
+        }
+
+        ret = -EINVAL;
+        goto out;
+    }
+
+    if (led->strobe_timeout != current_timeout)
+        ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG,
+                    LM3601X_TIMEOUT_MASK, timeout_reg_val);
+
+    if (state)
+        ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                    LM3601X_MODE_STROBE,
+                    LM3601X_MODE_STROBE);
+    else
+        ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                    LM3601X_MODE_STROBE, LED_OFF);
+
+    ret = lm3601x_read_faults(led);
+out:
+    mutex_unlock(&led->lock);
+    return ret;
+}
+
+static int lm3601x_strobe_brightness_set(struct led_classdev *cdev,
+                     enum led_brightness brightness)
+{
+    struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
+    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+    int ret;
+    u8 brightness_val;
+
+    mutex_lock(&led->lock);
+    ret = lm3601x_read_faults(led);
+    if (ret < 0)
+        goto out;
+
+    if (brightness == LED_OFF) {
+        ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+                    LM3601X_MODE_STROBE, LED_OFF);
+        goto out;
+    }
+
+    if (brightness == LED_ON)
+        brightness_val = LED_ON;
+    else
+        brightness_val = (brightness/2);
+
+    ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
+
+out:
+    mutex_unlock(&led->lock);
+    return ret;
+}
+
+static int lm3601x_strobe_timeout_set(struct led_classdev_flash *fled_cdev,
+                u32 timeout)
+{
+    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+    int ret = 0;
+
+    mutex_lock(&led->lock);
+
+    led->strobe_timeout = timeout;
+
+    mutex_unlock(&led->lock);
+
+    return ret;
+}
+
+static int lm3601x_strobe_get(struct led_classdev_flash *fled_cdev,
+                bool *state)
+{
+    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+    int ret;
+    int strobe_state;
+
+    mutex_lock(&led->lock);
+
+    ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &strobe_state);
+    if (ret < 0)
+        goto out;
+
+    *state = strobe_state & LM3601X_MODE_STROBE;
+
+out:
+    mutex_unlock(&led->lock);
+    return ret;
+}
+
+static int lm3601x_strobe_fault_get(struct led_classdev_flash *fled_cdev,
+                u32 *fault)
+{
+    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+
+    lm3601x_read_faults(led);
+
+    *fault = led->last_flag;
+
+    return 0;
+}
+
+static const struct led_flash_ops strobe_ops = {
+    .strobe_set        = lm3601x_strobe_set,
+    .strobe_get        = lm3601x_strobe_get,
+    .timeout_set        = lm3601x_strobe_timeout_set,
+    .fault_get        = lm3601x_strobe_fault_get,

You're still missing flash_brightness_set here.

OK not sure how this is working then.

flash_brightness_set sets the brightness that is to be applied
upon execution of strobe_set.



+};
+
+static int lm3601x_register_leds(struct lm3601x_led *led)
+{
+    struct led_classdev_flash *fled_cdev;
+    struct led_classdev *led_cdev;
+    int err = -ENODEV;
+
+    led->cdev_torch.name = led->led_name;
+    led->cdev_torch.max_brightness = LED_FULL;

This should be led->torch_current_max converted to brightness levels.
Please compare how leds-max77693 and leds-as3645a do that.

I will look into it.


+    led->cdev_torch.brightness_set_blocking = lm3601x_brightness_set;
+    err = devm_led_classdev_register(&led->client->dev,
+            &led->cdev_torch);
+    if (err < 0)
+        return err;

You shouldn't register two LED class devices for a single DT child
node, and honestly I don't know why you would have to do it.

See below


+
+    fled_cdev = &led->fled_cdev;
+    fled_cdev->ops = &strobe_ops;
+
+    led_cdev = &fled_cdev->led_cdev;
+    led_cdev->name = led->strobe;
+    led_cdev->max_brightness = LED_FUL
+    led_cdev->brightness_set_blocking = lm3601x_strobe_brightness_set;
+    led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+    err = led_classdev_flash_register(&led->client->dev,
+            fled_cdev);

Please look into the implementation of led_classdev_flash_register()
and compare other LED flash class drivers. What prevents you from
applying the same approach?

I did actually follow the same approach here as the as3645a driver.
I used this driver since I have a data sheet and can read the code.

You might have been misled by the indicator LED which is indeed
a separate one, but it doesn't have a counterpart in your driver.

But see the snippets from that driver:

This is for setting indicator brightness:
------------------------------------------

iled_cdev->brightness_set_blocking = as3645a_set_indicator_brightness;


This is for setting torch brightness:
-------------------------------------

fled_cdev->brightness_set_blocking = as3645a_set_assist_brightness;


This is for setting flash brightness:
-------------------------------------

static const struct led_flash_ops as3645a_led_flash_ops = {
	.flash_brightness_set = as3645a_set_flash_brightness,


This is a copy, paste, slight modify from that as3645a driver as3645a_led_class_setup function.

I used the devm register function above as a variation.

I will have to dig further into it.


To put it concisely: LED flash class wrapper was designed to allow
for operating on a single LED in two modes: torch and flash.
Torch brightness is governed by brightness file and flash brightness
is governed by flash_brightness file. The difference between the two
modes is that torch mode is activated by writing value greater than 0
to the brightness file and flash mode is activated by writing 1 to
the strobe_set file.

In other words flash_brightness overwrites the (torch) brightness
for the time equal to the flash_timeout or until 0 is written
to the strobe_set file.

I will look at it again


+    return err;
+}
+
+static void lm3601x_init_flash_timeout(struct lm3601x_led *led)
+{
+    struct led_flash_setting *setting;
+
+    setting = &led->fled_cdev.timeout;
+    setting->min = strobe_timeouts[0].timeout;
+    setting->max = led->max_strobe_timeout;
+    setting->step = 40;
+    setting->val = led->max_strobe_timeout;
+}
+
+static int lm3601x_parse_node(struct lm3601x_led *led,
+                  struct device_node *node)
+{
+    struct device_node *child_node;
+    const char *name;
+    char *mode_name;
+    int ret = -ENODEV;
+
+    for_each_available_child_of_node(node, child_node) {
+        led->led_node = of_node_get(child_node);
+        if (!led->led_node) {
+            dev_err(&led->client->dev,
+                "No LED Child node\n");
+
+            goto out_err;
+        }
+
+        ret = of_property_read_u32(led->led_node, "led-sources",
+                       &led->led_mode);
+        if (ret) {
+            dev_err(&led->client->dev,
+                "led-sources DT property missing\n");
+            goto out_err;
+        }
+
+        if (led->led_mode < LM3601X_LED_TORCH ||
+            led->led_mode > LM3601X_LED_IR) {
+            dev_warn(&led->client->dev,
+                "Invalid led mode requested\n");
+
+            goto out_err;
+
+        }
+    }
+
+    if (led->led_mode == LM3601X_LED_TORCH) {
+        ret = of_property_read_string(led->led_node, "label", &name);
+        if (!ret)
+            snprintf(led->led_name, sizeof(led->led_name),
+                "%s:%s", led->led_node->name, name);

First segment of a LED class device name should be "devicename".

Hmm.  I remember this conversation from my other drivers.
I just picked the wrong dt node name.

I will fix it.


+        else
+            snprintf(led->led_name, sizeof(led->led_name),
+                "%s:torch", led->led_node->name);
+
+        ret = of_property_read_u32(led->led_node, "led-max-microamp",
+                    &led->torch_current_max);
+        if (ret < 0) {
+            dev_warn(&led->client->dev,
+                "led-max-microamp DT property missing\n");
+
+            goto out_err;
+        }
+
+        mode_name = "torch";
+
+    } else if (led->led_mode == LM3601X_LED_IR) {
+        ret = of_property_read_string(led->led_node, "label", &name);
+        if (!ret)
+            snprintf(led->led_name, sizeof(led->led_name),
+                "%s:%s", led->led_node->name, name);
+        else
+            snprintf(led->led_name, sizeof(led->led_name),
+                "%s::infrared", led->led_node->name);

Ditto.

Ack


+
+        mode_name = "ir";
+
+    } else {
+        dev_warn(&led->client->dev,
+            "No LED mode is selected exiting probe\n");
+
+        goto out_err;
+    }
+
+    /* Flash mode is available in IR or Torch mode so read the DT */
+    snprintf(led->strobe, sizeof(led->strobe),
+            "%s:%s:strobe", led->led_node->name, mode_name);

strobe is not a proper LED function name (it is not a noun).
Please use "flash" instead.

Strobe can be used as a noun to define an electronic camera flash.  But this is
really a US English definition.

I've checked in Cambridge Dictionary and I was in fact wrong - it can be
either a verb or a noun.

I can change it to flash

We're using in few places the expression "to strobe the flash", so
let's use "flash" consistently to describe the LED function.


+
+    ret = of_property_read_u32(led->led_node,
+                "flash-max-microamp",
+                &led->strobe_current_max);
+    if (ret < 0) {
+        dev_warn(&led->client->dev,
+             "flash-max-microamp DT property missing\n");
+        goto out_err;
+    }
+
+    ret = of_property_read_u32(led->led_node,
+                "flash-max-timeout-us",
+                &led->max_strobe_timeout);
+    if (ret < 0) {
+        dev_warn(&led->client->dev,
+             "flash-max-timeout-us DT property missing\n");
+
+        goto out_err;
+    }
+
+    lm3601x_init_flash_timeout(led);
+
+out_err:
+    of_node_put(led->led_node);
+    return ret;
+}
+
+static int lm3601x_probe(struct i2c_client *client,
+            const struct i2c_device_id *id)
+{
+    struct lm3601x_led *led;
+    int err;
+
+    led = devm_kzalloc(&client->dev,
+                sizeof(struct lm3601x_led), GFP_KERNEL);
+    if (!led)
+        return -ENOMEM;
+
+    err = lm3601x_parse_node(led, client->dev.of_node);
+    if (err < 0)
+        return -ENODEV;
+
+    led->client = client;
+    led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap);
+    if (IS_ERR(led->regmap)) {
+        err = PTR_ERR(led->regmap);
+        dev_err(&client->dev,
+            "Failed to allocate register map: %d\n", err);
+        return err;
+    }
+
+    mutex_init(&led->lock);
+    i2c_set_clientdata(client, led);
+    err = lm3601x_register_leds(led);
+
+    return err;
+}
+
+static int lm3601x_remove(struct i2c_client *client)
+{
+    struct lm3601x_led *led = i2c_get_clientdata(client);
+
+    regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+               LM3601X_ENABLE_MASK,
+               LM3601X_MODE_STANDBY);

You need also mutex_destroy(&led->lock) here.

OK.


+
+    return 0;
+}
+
+static const struct i2c_device_id lm3601x_id[] = {
+    { "LM36010", CHIP_LM36010 },
+    { "LM36011", CHIP_LM36011 },
+    { },
+};
+MODULE_DEVICE_TABLE(i2c, lm3601x_id);
+
+static const struct of_device_id of_lm3601x_leds_match[] = {
+    { .compatible = "ti,lm36010", },
+    { .compatible = "ti,lm36011", },
+    {},
+};
+MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match);
+
+static struct i2c_driver lm3601x_i2c_driver = {
+    .driver = {
+        .name = "lm3601x",
+        .of_match_table = of_lm3601x_leds_match,
+    },
+    .probe = lm3601x_probe,
+    .remove = lm3601x_remove,
+    .id_table = lm3601x_id,
+};
+module_i2c_driver(lm3601x_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X");
+MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>");
+MODULE_LICENSE("GPL v2");





--
Best regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux