Allow configuring the device as wakeup source through device properties, as
not all platforms want to wake up on touch screen activity.
Note that by default, the device will now no longer be a wakeup source.
Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
---
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt | 3 +++
drivers/input/touchscreen/edt-ft5x06.c | 3 ++-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index 025cf8c9324a..83f792d4d88c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -52,6 +52,8 @@ Optional properties:
- touchscreen-inverted-y : See touchscreen.txt
- touchscreen-swapped-x-y : See touchscreen.txt
+ - wakeup-source: touchscreen acts as wakeup source
+
Example:
polytouch: edt-ft5x06@38 {
compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
@@ -62,4 +64,5 @@ Example:
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
};
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 5bf63f76ddda..955f085627fa 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -1007,7 +1007,8 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
goto err_remove_attrs;
edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
- device_init_wakeup(&client->dev, 1);
+ device_init_wakeup(&client->dev,
+ device_property_read_bool(dev, "wakeup-source"));
dev_dbg(&client->dev,
"EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n",
--
2.14.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
