Re: [RESEND PATCH v5 0/6] Add support for PWM input capture on STM32

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/16/2018 10:06 AM, Lee Jones wrote:
> On Wed, 16 May 2018, Fabrice Gasnier wrote:
> 
>> This series adds support for capture to stm32-pwm driver.
>> Capture is based on DMAs.
>> - First two patches add support for requesting DMAs to MFD core
>> - Next three patches add support for capture to stm32-pwm driver
>> - This has been tested on stm32429i-eval board.
>>
>> ---
>> Changes in v5:
>> - update patch 2 (mfd: stm32-timers: add support for dmas)
>>   move stm32_timers_dma struct to header file,
>>   fix warning on dma_mapping_error().
>>
>> Changes in v4:
>> - Lee's comments on patch 2 (mfd: stm32-timers: add support for dmas)
>>   Add kerneldoc header, better format comments.
>>
>> Changes in v3:
>> - Dropped 2 precusor patches applied by Thierry in pwm tree:
>>   "pwm: stm32: fix, remove unused struct device"
>>   "pwm: stm32: protect common prescaler for all channels"
>> - Note: this series applies on top on pwm tree
>> - Implements Lee's comments on MFD part: rework stm32_timers_dma struct,
>>   exported routine prototype now use generic device struct, more
>>   various comments (see patch 2 changelog).
>>
>> Resend v2:
>> - Add collected Acks
>>
>> Changes in v2:
>> - Abstract DMA handling from child driver: move it to MFD core
>> - Rework pwm capture routines to adopt this change
>> - Comment on optional dma support, beautify DMAs probe
>>
>> Fabrice Gasnier (6):
>>   dt-bindings: mfd: stm32-timers: add support for dmas
>>   mfd: stm32-timers: add support for dmas
>>   pwm: stm32: add capture support
>>   pwm: stm32: improve capture by tuning counter prescaler
>>   pwm: stm32: use input prescaler to improve period capture
>>   ARM: dts: stm32: Enable pwm3 input capture on stm32f429i-eval
> 
> Applied patches 1-5.

Many thanks Lee !

Maybe I missed something, but just in case...
In your pull request ("[GIT PULL] Immutable branch between MFD and PWM
due for the v4.18 merge window") I only see 4 patches:
Fabrice Gasnier (4):
      mfd: stm32-timers: Add support for DMAs
      pwm: stm32: Add capture support
      pwm: stm32: Improve capture by tuning counter prescaler
      pwm: stm32: Use input prescaler to improve period capture

I can't see patch 1 ("dt-bindings: mfd: stm32-timers: add support for dmas")
Is it applied on another tree ?

Best Regards,
Fabrice

> 
>>  .../devicetree/bindings/mfd/stm32-timers.txt       |  20 ++
>>  arch/arm/boot/dts/stm32429i-eval.dts               |   3 +
>>  drivers/mfd/stm32-timers.c                         | 201 +++++++++++++++-
>>  drivers/pwm/pwm-stm32.c                            | 257 +++++++++++++++++++++
>>  include/linux/mfd/stm32-timers.h                   |  58 +++++
>>  5 files changed, 537 insertions(+), 2 deletions(-)
>>
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux