Re: [PATCH RFC 04/10] base: power: Add generic OF-based power domain look-up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Philipp,

On 19.02.2014 17:53, Philipp Zabel wrote:
Am Samstag, den 11.01.2014, 20:42 +0100 schrieb Tomasz Figa:

[snip]

+	pd = of_genpd_get_from_provider(&pd_args);
+	if (IS_ERR(pd))
+		return PTR_ERR(pd);
+
+	dev_dbg(dev, "adding to power domain %s\n", pd->name);
+
+	while (1) {
+		ret = pm_genpd_add_device(pd, dev);

Since pm_genpd_add_device is used here, no gpd_timing_data can be
provided. Do you have a plan to solve this? Should the timing data be
provided from the device tree?

Hmm, a quick grep over kernel sources for genpd_.*_add_device
gives just a single user of __pm_genpd_name_add_device(), with custom timing data:

arch/arm/mach-shmobile/pm-rmobile.c-void rmobile_add_device_to_domain_td(const char *domain_name,
arch/arm/mach-shmobile/pm-rmobile.c-                                 struct platform_device *pdev,
arch/arm/mach-shmobile/pm-rmobile.c-                                 struct gpd_timing_data *td)
arch/arm/mach-shmobile/pm-rmobile.c-{
arch/arm/mach-shmobile/pm-rmobile.c-    struct device *dev = &pdev->dev;
arch/arm/mach-shmobile/pm-rmobile.c-
arch/arm/mach-shmobile/pm-rmobile.c:    __pm_genpd_name_add_device(domain_name, dev, td);
arch/arm/mach-shmobile/pm-rmobile.c-    if (pm_clk_no_clocks(dev))
arch/arm/mach-shmobile/pm-rmobile.c-            pm_clk_add(dev, NULL);
arch/arm/mach-shmobile/pm-rmobile.c-}
arch/arm/mach-shmobile/pm-rmobile.c-
arch/arm/mach-shmobile/pm-rmobile.c-void rmobile_add_devices_to_domains(struct pm_domain_device data[],
arch/arm/mach-shmobile/pm-rmobile.c-                                int size)
arch/arm/mach-shmobile/pm-rmobile.c-{
arch/arm/mach-shmobile/pm-rmobile.c-    struct gpd_timing_data latencies = {
arch/arm/mach-shmobile/pm-rmobile.c-            .stop_latency_ns = DEFAULT_DEV_LATENCY_NS,
arch/arm/mach-shmobile/pm-rmobile.c-            .start_latency_ns = DEFAULT_DEV_LATENCY_NS,
arch/arm/mach-shmobile/pm-rmobile.c-            .save_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
arch/arm/mach-shmobile/pm-rmobile.c-            .restore_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
arch/arm/mach-shmobile/pm-rmobile.c-    };
arch/arm/mach-shmobile/pm-rmobile.c-    int j;
arch/arm/mach-shmobile/pm-rmobile.c-
arch/arm/mach-shmobile/pm-rmobile.c-    for (j = 0; j < size; j++)
arch/arm/mach-shmobile/pm-rmobile.c-            rmobile_add_device_to_domain_td(data[j].domain_name,
arch/arm/mach-shmobile/pm-rmobile.c-                                            data[j].pdev, &latencies);
arch/arm/mach-shmobile/pm-rmobile.c-}

Moreover the timings used there are just defaults, which makes me wonder if there is any reason to specify them explicitly. Even more interesting is the fact that genpd code can measure those latencies itself.

Do you have a particular use case for those timing data or just wondering? I don't think we need to implement support for them right away, if there is no real need to do so. The code and bindings can be extended later to handle them, if needed.

As for whether DT is appropriate place to define them, I'm not quite sure. Stop and start latencies look like hardware parameters, but state save and restore are likely to be driver-specific, as it depends on driver code how much time it takes to save and restore needed state (e.g. driver with register cache will not need to do any state save), if I understand these timing data correctly.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux