Remove unneeded address/size cells properties and unit addresses to fix
DTC warnings like:
arch/arm/boot/dts/tegra30-apalis-eval.dtb: Warning (unit_address_vs_reg):
/i2c@7000d000/stmpe811@41/stmpe_touchscreen@0: node has a unit name, but no reg property
arch/arm/boot/dts/tegra30-apalis-eval.dtb: Warning (avoid_unnecessary_addr_size):
/i2c@7000d000/stmpe811@41: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra30-apalis.dtsi | 4 +---
arch/arm/boot/dts/tegra30-beaver.dts | 3 ---
arch/arm/boot/dts/tegra30-colibri.dtsi | 2 --
3 files changed, 1 insertion(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 184f60c720fa..5038ca7b68af 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -590,8 +590,6 @@
/* STMPE811 touch screen controller */
stmpe811@41 {
compatible = "st,stmpe811";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x41>;
interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio>;
@@ -600,7 +598,7 @@
blocks = <0x5>;
irq-trigger = <0x1>;
- stmpe_touchscreen@0 {
+ stmpe_touchscreen {
compatible = "st,stmpe-ts";
/* 3.25 MHz ADC clock speed */
st,adc-freq = <1>;
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 72369877d284..961934f70639 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -1791,9 +1791,6 @@
vccio-supply = <&vdd_5v_in_reg>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
vdd1_reg: vdd1 {
regulator-name = "vddio_ddr_1v2";
regulator-min-microvolt = <1200000>;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index cc46cedf80b9..a593dc8be47f 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -352,8 +352,6 @@
/* STMPE811 touch screen controller */
stmpe811@41 {
compatible = "st,stmpe811";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x41>;
interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
