On 15/05/2018 14:47, Radu Pirea wrote: > On Mon, 2018-05-14 at 12:57 +0200, Richard Genoud wrote: >> After your patch, the DMA is not selected anymore: >> atmel_usart_serial atmel_usart_serial.0.auto: TX channel not >> available, switch to pio >> instead of: >> atmel_usart fffff200.serial: using dma1chan2 for tx DMA transfers >> > Fixed. >> And the kernel doesn't log anymore on the serial console, despite the >> loglevel=8 >> (after reverting this series, the kernel logs reappears on the serial >> console) >> > Which serial are you using as console? fffff200.serial (sam9g35-cm) ( stdout-path = "serial0:115200n8"; in the DTS ) With this series applied, all the kernel log goes on the screen. Without, it goes on the serial debug. >> (tests done on sam9g35) >> > I will consider the rest of suggestions. >> regards, >> Richard -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
