On Mon, May 14, 2018 at 04:46:41PM -0700, Florian Fainelli wrote: > On 04/25/2018 11:14 AM, Dmitry Torokhov wrote: > > On Wed, Apr 25, 2018 at 10:00:31AM -0500, Rob Herring wrote: > >> On Tue, Apr 24, 2018 at 5:58 PM, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote: > >>> Hi Linus, Rafael, all > >>> > >>> Our GPIO controller driver: gpio-brcmstb.c has a shutdown callback which > >>> gets invoked when the system is brought into poweroff aka S5. So far so > >>> good, except that we also wish to use gpio_keys.c as a possible wake-up > >>> source, so we may have a number of GPIO pins declared as gpio-keys that > >>> allow the system to wake-up from deep slumber. > >>> > >>> Recently we noticed that we could easily get into a state where > >>> gpio-brcmstb.c::brcmstb_gpio_shutdown() gets called first, and then > >>> gpio_keys.c::gpio_keys_suspend() gets called later, which is too late to > >>> have the enable_irq_wake() call do anything sensible since we have > >>> suspend its parent interrupt controller before. This is completely > >>> expected unfortunately because these two drivers are both platform > >>> device instances with no connection to one another except via Device > >>> Tree and the use of the GPIOLIB APIs. > >>> > >>> First solution is to make sure that gpio-keys nodes are declared in > >>> Device Tree *before* the GPIO controller. This works because Device Tree > >>> nodes are probed in the order in which they are declared in Device Tree > >>> and that directly influences the order in which platform devices are > >>> created. Problem with that is that this is easy to miss and it may not > >>> work with overlays, kexec reconstructing DT etc. etc. > >> > >> I'm going to make of_platform_populate randomize the order it creates devices... > >> > >>> Another possible solution would be have the GPIO controller nodes have > >>> the GPIO consumers nodes such as gpio-keys, gpio-leds etc., and that > >>> would allow the Linux device driver model to create an appropriate > >>> child/parent relationship. This would unfortunately require Device Tree > >>> changes everywhere to make that consistent, and it would be a special > >>> case, because not all GPIO consumers are eligible as child nodes of > >>> their parent GPIO controller, there are plenty of other consumers that > >>> are not suitable for being moved under a parent GPIO controller node. > >>> This would also mean that we need to "probe" GPIO controller nodes to > >>> populate their child nodes (e.g: of_platform_bus_populate). > >>> > >>> I am thinking a more generic solution might involve some more complex > >>> tracking of the provider <-> consumer, but there is room for breakage. > >> > >> That's what device connections are for. It probably just needs the > >> GPIO core to create the links. (but I've not looked into it at all). > > > > Not all APIs accept device as parameter to easily create links. But I > > wonder, for cases like this, if we could not simply move the device to > > the end of the dpm list after successful binding it to a driver. The > > assumption that when GOPIs or other resources are not ready they'll > > return -EPROBE_DEFER and probing would fail. > > Dmitry, do you see any reason why we are enabling the gpio_keys.c button > interrupts for wake-up during suspend/resume only, and not right from > the probe() function? > > button->wakeup is effectively read-only past the probe function, if we > moved the logic to enable/disable the interrupts that would greatly > simplify things. I am assuming whomever added that functionality must > have been worried about spurious wake-up events somehow and wanted to do > it as late as possible? Florian, device_may_wakeup() is not constant (it may be changed via sysfs), and when the driver was written we did not have dev_pm_set_wake_irq() that can be used in probe() and handles wakeup flag changing, so we had to arm wake IRQs in suspend. And even now, with support of different interrupt triggers for normal operation and wakeup action, we need to reprogram interrupts in suspend. Thanks. -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
