Hi > -----Original Message----- > From: Mats Karrman [mailto:mats.dev.list@xxxxxxxxx] > Sent: 2018年5月12日 3:49 > To: Jun Li <jun.li@xxxxxxx>; robh+dt@xxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; > heikki.krogerus@xxxxxxxxxxxxxxx; linux@xxxxxxxxxxxx > Cc: a.hajda@xxxxxxxxxxx; cw00.choi@xxxxxxxxxxx; > shufan_lee@xxxxxxxxxxx; Peter Chen <peter.chen@xxxxxxx>; > gsomlo@xxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx; > dl-linux-imx <linux-imx@xxxxxxx> > Subject: Re: [PATCH v5 01/14] dt-bindings: connector: add properties for typec > > Hi Li Jun, > > On 2018-05-03 02:24, Li Jun wrote: > > > Add bingdings supported by current typec driver, so user can pass all > > those properties via dt. > > > > Signed-off-by: Li Jun <jun.li@xxxxxxx> > > --- > > .../bindings/connector/usb-connector.txt | 44 > +++++++++++++++ > > include/dt-bindings/usb/pd.h | 62 > ++++++++++++++++++++++ > > 2 files changed, 106 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/connector/usb-connector.txt > > b/Documentation/devicetree/bindings/connector/usb-connector.txt > > index e1463f1..4b19de6d0 100644 > > --- a/Documentation/devicetree/bindings/connector/usb-connector.txt > > +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt > > @@ -15,6 +15,33 @@ Optional properties: > > - type: size of the connector, should be specified in case of USB-A, USB-B > > non-fullsize connectors: "mini", "micro". > > > > +Optional properties for usb-c-connector: > > +- power-role: should be one of "source", "sink" or "dual"(DRP) if > > +typec > > + connector has power support. > > +- try-power-role: preferred power role if "dual"(DRP) can support > > +Try.SNK > > + or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC. > > +- data-role: should be one of "host", "device", "dual"(DRD) if typec > > + connector supports USB data. > > + > > +Required properties for usb-c-connector with power delivery support: > > +- source-pdos: An array of u32 with each entry providing supported > > +power > > + source data object(PDO), the detailed bit definitions of PDO can be > > +found > > + in "Universal Serial Bus Power Delivery Specification" chapter > > +6.4.1.2 > > + Source_Capabilities Message, the order of each entry(PDO) should > > +follow > > + the PD spec chapter 6.4.1. Required for power source and power dual > role. > > + User can specify the source PDO array via PDO_FIXED/BATT/VAR() > > +defined in > > + dt-bindings/usb/pd.h. > > +- sink-pdos: An array of u32 with each entry providing supported > > +power > > + sink data object(PDO), the detailed bit definitions of PDO can be > > +found > > + in "Universal Serial Bus Power Delivery Specification" chapter > > +6.4.1.3 > > + Sink Capabilities Message, the order of each entry(PDO) should > > +follow > > + the PD spec chapter 6.4.1. Required for power sink and power dual role. > > + User can specify the sink PDO array via PDO_FIXED/BATT/VAR() > > +defined in > > + dt-bindings/usb/pd.h. > > +- op-sink-microwatt: Sink required operating power in microwatt, if > > +source > > + can't offer the power, Capability Mismatch is set, required for > > +power > > ...set. Required... > (new sentence, otherwise it's unclear what is required; op-sink-microwatt or > Capability Mismatch set) OK, will update as you suggested. Thanks Li Jun ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
