On Thu, May 10, 2018 at 4:10 AM, Sekhar Nori <nsekhar@xxxxxx> wrote:
> On Monday 07 May 2018 06:07 PM, Adam Ford wrote:
>> Many node labels in the device tree (like serial0, serial1, etc) are being
>> redefined, so let's modernize the device tree by using phandles to
>> extend the existing nodes. This helps reduce the whitespace.
>>
>> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
>
> I applied this without the pmic changes. I am not convinced about those.
> The tps node is already being referred to as phandle. I am not sure
> referring to each individual regulator using phandle is needed. Other
> files like am335x-evm.dts don't do it as well.
I tested the regulator values and names after booting to see if the
names and values matched the expected values. They did, so I am
fairly confident it would have worked.
>
> Another thing is whether we really need the tp6507x.dtsi file. It does
> not seem to contain much and also da850-evm.dts is the only file
> including it. So it seems pretty pointless to me.
Do you want me to do a patch that removes the tp6507x.dtsi file and
just sets up the
PMIC from scratch within the da850-evm file?
>
> Here is what I committed.
Thank you. I think looks cleaner this way, and more consistent with
many of the other platforms and boards.
adam
>
> Thanks,
> Sekhar
>
> ---8<---
> commit ae62a32d6019a8225e2c32e631b8b0d039151131 (refs/heads/v4.18/dt)
> Author: Adam Ford <aford173@xxxxxxxxx>
> AuthorDate: Mon May 7 07:37:21 2018 -0500
> Commit: Sekhar Nori <nsekhar@xxxxxx>
> CommitDate: Thu May 10 14:01:15 2018 +0530
>
> ARM: dts: da850-evm: use phandles to extend nodes
>
> Many node labels in the device tree (like serial0, serial1, etc) are being
> redefined, so let's modernize the device tree by using phandles to
> extend the existing nodes. This helps reduce the whitespace.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> [nsekhar@xxxxxx: drop tps6507x related changes]
> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
>
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index 339cae353302..9389f95f4094 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -27,143 +27,6 @@
> spi0 = &spi1;
> };
>
> - soc@1c00000 {
> - pmx_core: pinmux@14120 {
> - status = "okay";
> -
> - mcasp0_pins: pinmux_mcasp0_pins {
> - pinctrl-single,bits = <
> - /*
> - * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
> - * AFSR, AMUTE
> - */
> - 0x00 0x11111111 0xffffffff
> - /* AXR11, AXR12 */
> - 0x04 0x00011000 0x000ff000
> - >;
> - };
> - nand_pins: nand_pins {
> - pinctrl-single,bits = <
> - /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
> - 0x1c 0x10110110 0xf0ff0ff0
> - /*
> - * EMA_D[0], EMA_D[1], EMA_D[2],
> - * EMA_D[3], EMA_D[4], EMA_D[5],
> - * EMA_D[6], EMA_D[7]
> - */
> - 0x24 0x11111111 0xffffffff
> - /* EMA_A[1], EMA_A[2] */
> - 0x30 0x01100000 0x0ff00000
> - >;
> - };
> - };
> - serial0: serial@42000 {
> - status = "okay";
> - };
> - serial1: serial@10c000 {
> - status = "okay";
> - };
> - serial2: serial@10d000 {
> - status = "okay";
> - };
> - rtc0: rtc@23000 {
> - status = "okay";
> - };
> - i2c0: i2c@22000 {
> - status = "okay";
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c0_pins>;
> -
> - tps: tps@48 {
> - reg = <0x48>;
> - };
> - tlv320aic3106: tlv320aic3106@18 {
> - #sound-dai-cells = <0>;
> - compatible = "ti,tlv320aic3106";
> - reg = <0x18>;
> - status = "okay";
> -
> - /* Regulators */
> - IOVDD-supply = <&vdcdc2_reg>;
> - /* Derived from VBAT: Baseboard 3.3V / 1.8V */
> - AVDD-supply = <&vbat>;
> - DRVDD-supply = <&vbat>;
> - DVDD-supply = <&vbat>;
> - };
> - tca6416: gpio@20 {
> - compatible = "ti,tca6416";
> - reg = <0x20>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> - };
> - wdt: wdt@21000 {
> - status = "okay";
> - };
> - mmc0: mmc@40000 {
> - max-frequency = <50000000>;
> - bus-width = <4>;
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&mmc0_pins>;
> - };
> - spi1: spi@30e000 {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
> - flash: m25p80@0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "m25p64";
> - spi-max-frequency = <30000000>;
> - m25p,fast-read;
> - reg = <0>;
> - partition@0 {
> - label = "U-Boot-SPL";
> - reg = <0x00000000 0x00010000>;
> - read-only;
> - };
> - partition@1 {
> - label = "U-Boot";
> - reg = <0x00010000 0x00080000>;
> - read-only;
> - };
> - partition@2 {
> - label = "U-Boot-Env";
> - reg = <0x00090000 0x00010000>;
> - read-only;
> - };
> - partition@3 {
> - label = "Kernel";
> - reg = <0x000a0000 0x00280000>;
> - };
> - partition@4 {
> - label = "Filesystem";
> - reg = <0x00320000 0x00400000>;
> - };
> - partition@5 {
> - label = "MAC-Address";
> - reg = <0x007f0000 0x00010000>;
> - read-only;
> - };
> - };
> - };
> - mdio: mdio@224000 {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&mdio_pins>;
> - bus_freq = <2200000>;
> - };
> - eth0: ethernet@220000 {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&mii_pins>;
> - };
> - gpio: gpio@226000 {
> - status = "okay";
> - };
> - };
> vbat: fixedregulator0 {
> compatible = "regulator-fixed";
> regulator-name = "vbat";
> @@ -200,6 +63,153 @@
> };
> };
>
> +&pmx_core {
> + status = "okay";
> +
> + mcasp0_pins: pinmux_mcasp0_pins {
> + pinctrl-single,bits = <
> + /*
> + * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
> + * AFSR, AMUTE
> + */
> + 0x00 0x11111111 0xffffffff
> + /* AXR11, AXR12 */
> + 0x04 0x00011000 0x000ff000
> + >;
> + };
> + nand_pins: nand_pins {
> + pinctrl-single,bits = <
> + /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
> + 0x1c 0x10110110 0xf0ff0ff0
> + /*
> + * EMA_D[0], EMA_D[1], EMA_D[2],
> + * EMA_D[3], EMA_D[4], EMA_D[5],
> + * EMA_D[6], EMA_D[7]
> + */
> + 0x24 0x11111111 0xffffffff
> + /* EMA_A[1], EMA_A[2] */
> + 0x30 0x01100000 0x0ff00000
> + >;
> + };
> +};
> +
> +&serial0 {
> + status = "okay";
> +};
> +
> +&serial1 {
> + status = "okay";
> +};
> +
> +&serial2 {
> + status = "okay";
> +};
> +
> +&rtc0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> +
> + tps: tps@48 {
> + reg = <0x48>;
> + };
> + tlv320aic3106: tlv320aic3106@18 {
> + #sound-dai-cells = <0>;
> + compatible = "ti,tlv320aic3106";
> + reg = <0x18>;
> + status = "okay";
> +
> + /* Regulators */
> + IOVDD-supply = <&vdcdc2_reg>;
> + /* Derived from VBAT: Baseboard 3.3V / 1.8V */
> + AVDD-supply = <&vbat>;
> + DRVDD-supply = <&vbat>;
> + DVDD-supply = <&vbat>;
> + };
> + tca6416: gpio@20 {
> + compatible = "ti,tca6416";
> + reg = <0x20>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +};
> +
> +&wdt {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + max-frequency = <50000000>;
> + bus-width = <4>;
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins>;
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
> + flash: m25p80@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "m25p64";
> + spi-max-frequency = <30000000>;
> + m25p,fast-read;
> + reg = <0>;
> + partition@0 {
> + label = "U-Boot-SPL";
> + reg = <0x00000000 0x00010000>;
> + read-only;
> + };
> + partition@1 {
> + label = "U-Boot";
> + reg = <0x00010000 0x00080000>;
> + read-only;
> + };
> + partition@2 {
> + label = "U-Boot-Env";
> + reg = <0x00090000 0x00010000>;
> + read-only;
> + };
> + partition@3 {
> + label = "Kernel";
> + reg = <0x000a0000 0x00280000>;
> + };
> + partition@4 {
> + label = "Filesystem";
> + reg = <0x00320000 0x00400000>;
> + };
> + partition@5 {
> + label = "MAC-Address";
> + reg = <0x007f0000 0x00010000>;
> + read-only;
> + };
> + };
> +};
> +
> +&mdio {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&mdio_pins>;
> + bus_freq = <2200000>;
> +};
> +
> +ð0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&mii_pins>;
> +};
> +
> +&gpio {
> + status = "okay";
> +};
> +
> /include/ "tps6507x.dtsi"
>
> &tps {
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
