From: Levin Du <djw@xxxxxxxxxxxxx>
Some GPIOs sit in the GRF_SOC_CON registers of Rockchip SoCs,
which do not belong to the general pinctrl.
Adding gpio-syscon support makes controlling regulator or
LED using these special pins very easy by reusing existing
drivers, such as gpio-regulator and led-gpio.
Signed-off-by: Levin Du <djw@xxxxxxxxxxxxx>
---
Changes in v1:
- Refactured for general gpio-syscon usage for Rockchip SoCs.
- Add doc rockchip,gpio-syscon.txt
.../bindings/gpio/rockchip,gpio-syscon.txt | 41 ++++++++++++++++++++++
drivers/gpio/gpio-syscon.c | 30 ++++++++++++++++
2 files changed, 71 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt b/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
new file mode 100644
index 0000000..e4c1650
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
@@ -0,0 +1,41 @@
+* Rockchip GPIO support for GRF_SOC_CON registers
+
+Required properties:
+- compatible: Should contain "rockchip,gpio-syscon".
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+ the second cell is used to specify the gpio polarity:
+ 0 = Active high,
+ 1 = Active low.
+- gpio,syscon-dev: Should contain <grf_phandle syscon_offset 0>.
+ If declared as child of the grf node, the grf_phandle can be 0.
+
+Example:
+
+1. As child of grf node:
+
+ grf: syscon@ff100000 {
+ compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
+
+ gpio_syscon10: gpio-syscon10 {
+ compatible = "rockchip,gpio-syscon";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <0 0x0428 0>;
+ };
+ };
+
+
+2. Not child of grf node:
+
+ grf: syscon@ff100000 {
+ compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
+ //...
+ };
+
+ gpio_syscon10: gpio-syscon10 {
+ compatible = "rockchip,gpio-syscon";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&grf 0x0428 0>;
+ };
diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
index 7325b86..e24b408 100644
--- a/drivers/gpio/gpio-syscon.c
+++ b/drivers/gpio/gpio-syscon.c
@@ -135,6 +135,32 @@ static const struct syscon_gpio_data clps711x_mctrl_gpio = {
.dat_bit_offset = 0x40 * 8 + 8,
};
+static void rockchip_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int val)
+{
+ struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
+ unsigned int offs;
+ u8 bit;
+ u32 data;
+ int ret;
+
+ offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
+ bit = offs % SYSCON_REG_BITS;
+ data = (val ? BIT(bit) : 0) | BIT(bit + 16);
+ ret = regmap_write(priv->syscon,
+ (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
+ data);
+ if (ret < 0)
+ dev_err(chip->parent, "gpio write failed ret(%d)\n", ret);
+}
+
+static const struct syscon_gpio_data rockchip_gpio_syscon = {
+ /* Rockchip GRF_SOC_CON Bits 0-15 */
+ .flags = GPIO_SYSCON_FEAT_OUT,
+ .bit_count = 16,
+ .set = rockchip_gpio_set,
+};
+
#define KEYSTONE_LOCK_BIT BIT(0)
static void keystone_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
@@ -175,6 +201,10 @@ static const struct of_device_id syscon_gpio_ids[] = {
.compatible = "ti,keystone-dsp-gpio",
.data = &keystone_dsp_gpio,
},
+ {
+ .compatible = "rockchip,gpio-syscon",
+ .data = &rockchip_gpio_syscon,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, syscon_gpio_ids);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
