Reset EP when disable it to reset data toggle for U2 EP, and
SeqN, flow control status etc for U3 EP, this can avoid
issue of uncontinuous SeqN
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
v2:
add this patch
---
drivers/usb/mtu3/mtu3_core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 65ff53a..0bc2b39 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -400,6 +400,10 @@ void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep)
mtu3_setbits(mbase, U3D_QIECR0, QMU_RX_DONE_INT(epnum));
}
+ /* reset: u2 - data toggle, u3 - SeqN, flow control status etc */
+ mtu3_setbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum));
+ mtu3_clrbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum));
+
ep_fifo_free(mep);
dev_dbg(mtu->dev, "%s: %s\n", __func__, mep->name);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
