On Thu, Feb 20, 2014 at 06:15:54PM +0000, Florian Fainelli wrote:
> Add the Device Tree binding documentation for the non-standard BCM63xx
> UART hardware block found in the BCM63xx DSL SoCs.
>
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
This looks fine to me.
Acked-by: Mark Rutland <mark.rutland@xxxxxxx>
> ---
> Changes in v2:
> - update the compatible property to be "brcm,bcm6345-uart" as suggested
> - reword the clocks and clock-names properties based on feedback from Mark
>
> .../devicetree/bindings/serial/bcm63xx-uart.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/serial/bcm63xx-uart.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/bcm63xx-uart.txt b/Documentation/devicetree/bindings/serial/bcm63xx-uart.txt
> new file mode 100644
> index 0000000..f288232
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/bcm63xx-uart.txt
> @@ -0,0 +1,27 @@
> +Broadcom BCM63xx UART: Non standard UART used in the Broadcom BCM63xx DSL SoCs
> +
> +Required properties:
> +- compatible: must be "brcm,bcm6345-uart"
> +- reg: offset and length of the register set for the device
> +- interrupts: device interrupt
> +- clocks: a list of phandles and clock-specifiers, one for each entry
> + in clock-names
> +- clock-names: should contain "periph" for the functional clock
> +
> +Example:
> +
> +serial0: uart@600 {
> + compatible = "brcm,bcm6345-uart";
> + reg = <0x600 0x1b>;
> + interrupts = <GIC_SPI 32 0>;
> + clocks = <&periph_clk>;
> + clock-names = "periph";
> +};
> +
> +Note: each UART port must have an alias correctly numbered in the "aliases"
> +node, e.g:
> +
> +aliases {
> + uart0 = &serial0;
> + uart1 = &serial1;
> +};
> --
> 1.8.3.2
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
