Hi Tirupathi,
On Fri, Mar 23, 2018 at 11:53:12AM +0530, Tirupathi Reddy wrote:
> Add resin key support to handle different types of key events
> defined in different platforms.
>
> Signed-off-by: Tirupathi Reddy <tirupath@xxxxxxxxxxxxxx>
> ---
> .../bindings/input/qcom,pm8941-pwrkey.txt | 32 +++++++++
> drivers/input/misc/pm8941-pwrkey.c | 81 ++++++++++++++++++++++
> 2 files changed, 113 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> index 07bf55f..c671636 100644
> --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> @@ -32,6 +32,32 @@ PROPERTIES
> Definition: presence of this property indicates that the KPDPWR_N pin
> should be configured for pull up.
>
> +RESIN SUBNODE
> +
> +The HW module can generate other optional key events like RESIN(reset-in pin).
> +The RESIN pin can be configured to support different key events on different
> +platforms. The resin key is described by the following properties.
> +
> +- interrupts:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: key change interrupt; The format of the specifier is
> + defined by the binding document describing the node's
> + interrupt parent.
> +
> +- linux,code:
> + Usage: required
> + Value type: <u32>
> + Definition: The input key-code associated with the resin key.
> + Use the linux event codes defined in
> + include/dt-bindings/input/linux-event-codes.h
> +
> +- bias-pull-up:
> + Usage: optional
> + Value type: <empty>
> + Definition: presence of this property indicates that the RESIN pin
> + should be configured for pull up.
> +
> EXAMPLE
>
> pwrkey@800 {
> @@ -40,4 +66,10 @@ EXAMPLE
> interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> debounce = <15625>;
> bias-pull-up;
> +
> + resin {
> + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + bias-pull-up;
> + };
> };
The new key and power key bindings are very similar, I would prefer if
we shared the parsing code and our new DTS looked like:
power {
...
};
resin {
...
};
(we can easily keep backward compatibility with power properties being
in device node).
> diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> index 18ad956..6e45d01 100644
> --- a/drivers/input/misc/pm8941-pwrkey.c
> +++ b/drivers/input/misc/pm8941-pwrkey.c
> @@ -20,6 +20,7 @@
> #include <linux/log2.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <linux/reboot.h>
> #include <linux/regmap.h>
> @@ -28,6 +29,7 @@
>
> #define PON_RT_STS 0x10
> #define PON_KPDPWR_N_SET BIT(0)
> +#define PON_RESIN_N_SET BIT(1)
>
> #define PON_PS_HOLD_RST_CTL 0x5a
> #define PON_PS_HOLD_RST_CTL2 0x5b
> @@ -37,6 +39,7 @@
> #define PON_PS_HOLD_TYPE_HARD_RESET 7
>
> #define PON_PULL_CTL 0x70
> +#define PON_RESIN_PULL_UP BIT(0)
> #define PON_KPDPWR_PULL_UP BIT(1)
>
> #define PON_DBC_CTL 0x71
> @@ -46,6 +49,7 @@
> struct pm8941_pwrkey {
> struct device *dev;
> int irq;
> + u32 resin_key_code;
> u32 baseaddr;
> struct regmap *regmap;
> struct input_dev *input;
> @@ -130,6 +134,24 @@ static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
> return IRQ_HANDLED;
> }
>
> +static irqreturn_t pm8941_resinkey_irq(int irq, void *_data)
> +{
> + struct pm8941_pwrkey *pwrkey = _data;
> + unsigned int sts;
> + int error;
> + u32 key_code = pwrkey->resin_key_code;
> +
> + error = regmap_read(pwrkey->regmap,
> + pwrkey->baseaddr + PON_RT_STS, &sts);
> + if (error)
> + return IRQ_HANDLED;
> +
> + input_report_key(pwrkey->input, key_code, !!(sts & PON_RESIN_N_SET));
> + input_sync(pwrkey->input);
> +
> + return IRQ_HANDLED;
> +}
> +
> static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
> {
> struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
> @@ -153,9 +175,56 @@ static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
> static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
> pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
>
> +static int pm8941_resin_key_init(struct pm8941_pwrkey *pwrkey,
> + struct device_node *np)
> +{
> + int error, irq;
> + bool pull_up;
> +
> + /*
> + * Get the standard-key parameters. This might not be
> + * specified if there is no key mapping on the reset line.
> + */
> + error = of_property_read_u32(np, "linux,code", &pwrkey->resin_key_code);
> + if (error) {
> + dev_err(pwrkey->dev, "failed to read key-code for resin key\n");
> + return error;
> + }
> +
> + pull_up = of_property_read_bool(np, "bias-pull-up");
> +
> + irq = irq_of_parse_and_map(np, 0);
irq_of_parse_and_map() returns unsigned.
> + if (irq < 0) {
> + dev_err(pwrkey->dev, "failed to get resin irq\n");
> + return -EINVAL;
> + }
> +
> + /* Register key configuration */
> + input_set_capability(pwrkey->input, EV_KEY, pwrkey->resin_key_code);
> +
> + error = regmap_update_bits(pwrkey->regmap,
> + pwrkey->baseaddr + PON_PULL_CTL,
> + PON_RESIN_PULL_UP,
> + pull_up ? PON_RESIN_PULL_UP : 0);
> + if (error) {
> + dev_err(pwrkey->dev, "failed to set resin pull: %d\n", error);
> + return error;
> + }
> +
> + error = devm_request_threaded_irq(pwrkey->dev, irq, NULL,
> + pm8941_resinkey_irq, IRQF_ONESHOT,
> + "pm8941_resinkey", pwrkey);
> + if (error)
> + dev_err(pwrkey->dev, "failed requesting resin key IRQ: %d\n",
> + error);
> +
> + return error;
> +}
> +
> static int pm8941_pwrkey_probe(struct platform_device *pdev)
> {
> struct pm8941_pwrkey *pwrkey;
> + struct device_node *np = NULL;
> bool pull_up;
> u32 req_delay;
> int error;
> @@ -241,6 +310,18 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
> return error;
> }
>
> + np = of_find_node_by_name(pdev->dev.of_node, "resin");
> + if (np) {
> + /* resin key capabilities are defined in device node */
> + error = pm8941_resin_key_init(pwrkey, np);
> + of_node_put(np);
> + if (error) {
> + dev_err(&pdev->dev, "failed resin key initialization: %d\n",
> + error);
> + return error;
> + }
> + }
> +
> error = input_register_device(pwrkey->input);
> if (error) {
> dev_err(&pdev->dev, "failed to register input device: %d\n",
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>
Can you please try the version below and let me know if it works for
you?
Thanks!
--
Dmitry
Input: pm8941-pwrkey - add resin key capabilities
From: Tirupathi Reddy <tirupath@xxxxxxxxxxxxxx>
Add resin key support to handle different types of key events
defined in different platforms.
Signed-off-by: Tirupathi Reddy <tirupath@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
.../bindings/input/qcom,pm8941-pwrkey.txt | 56 ++++++-
drivers/input/misc/pm8941-pwrkey.c | 163 +++++++++++++-------
2 files changed, 161 insertions(+), 58 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
index 07bf55f6e0b9a..314bc7fd767d7 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
@@ -13,6 +13,14 @@ PROPERTIES
Value type: <prop-encoded-array>
Definition: base address of registers for block
+- debounce:
+ Usage: optional
+ Value type: <u32>
+ Definition: time in microseconds that key must be pressed or released
+ for state change interrupt to trigger.
+
+POWER SUBNODE
+
- interrupts:
Usage: required
Value type: <prop-encoded-array>
@@ -20,11 +28,13 @@ PROPERTIES
defined by the binding document describing the node's
interrupt parent.
-- debounce:
+- linux,code:
Usage: optional
Value type: <u32>
- Definition: time in microseconds that key must be pressed or released
- for state change interrupt to trigger.
+ Definition: The input key-code associated with the power key.
+ Use the linux event codes defined in
+ include/dt-bindings/input/linux-event-codes.h
+ When property is omitted KEY_POWER is assumed.
- bias-pull-up:
Usage: optional
@@ -32,12 +42,48 @@ PROPERTIES
Definition: presence of this property indicates that the KPDPWR_N pin
should be configured for pull up.
+RESIN SUBNODE (optional)
+
+The HW module can generate other optional key events like RESIN(reset-in pin).
+The RESIN pin can be configured to support different key events on different
+platforms. The resin key is described by the following properties.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: key change interrupt; The format of the specifier is
+ defined by the binding document describing the node's
+ interrupt parent.
+
+- linux,code:
+ Usage: required
+ Value type: <u32>
+ Definition: The input key-code associated with the resin key.
+ Use the linux event codes defined in
+ include/dt-bindings/input/linux-event-codes.h
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <empty>
+ Definition: presence of this property indicates that the RESIN pin
+ should be configured for pull up.
+
EXAMPLE
pwrkey@800 {
compatible = "qcom,pm8941-pwrkey";
reg = <0x800>;
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
- bias-pull-up;
+
+ power {
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_POWER>;
+ bias-pull-up;
+ };
+
+ resin {
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ bias-pull-up;
+ };
};
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index 18ad956454f1e..ac079b0b94c9a 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -20,7 +20,9 @@
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
@@ -28,6 +30,7 @@
#define PON_RT_STS 0x10
#define PON_KPDPWR_N_SET BIT(0)
+#define PON_RESIN_N_SET BIT(1)
#define PON_PS_HOLD_RST_CTL 0x5a
#define PON_PS_HOLD_RST_CTL2 0x5b
@@ -37,19 +40,21 @@
#define PON_PS_HOLD_TYPE_HARD_RESET 7
#define PON_PULL_CTL 0x70
+#define PON_RESIN_PULL_UP BIT(0)
#define PON_KPDPWR_PULL_UP BIT(1)
#define PON_DBC_CTL 0x71
#define PON_DBC_DELAY_MASK 0x7
-
struct pm8941_pwrkey {
struct device *dev;
- int irq;
- u32 baseaddr;
struct regmap *regmap;
struct input_dev *input;
+ u32 baseaddr;
+ u32 power_keycode;
+ u32 resin_keycode;
+
unsigned int revision;
struct notifier_block reboot_notifier;
};
@@ -122,41 +127,90 @@ static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
error = regmap_read(pwrkey->regmap,
pwrkey->baseaddr + PON_RT_STS, &sts);
if (error)
- return IRQ_HANDLED;
+ goto out;
+
+ if (pwrkey->power_keycode != KEY_RESERVED)
+ input_report_key(pwrkey->input, pwrkey->power_keycode,
+ sts & PON_KPDPWR_N_SET);
+
+ if (pwrkey->resin_keycode != KEY_RESERVED)
+ input_report_key(pwrkey->input, pwrkey->resin_keycode,
+ sts & PON_RESIN_N_SET);
- input_report_key(pwrkey->input, KEY_POWER, !!(sts & PON_KPDPWR_N_SET));
input_sync(pwrkey->input);
+out:
return IRQ_HANDLED;
}
-static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
+static int pm8941_key_init(struct device_node *np,
+ struct pm8941_pwrkey *pwrkey,
+ unsigned int *keycode,
+ unsigned int default_keycode,
+ u32 pull_up_bit,
+ const char *keyname,
+ bool wakeup)
{
- struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+ char *irq_devname;
+ unsigned int irq;
+ int error;
+ bool pull_up;
- if (device_may_wakeup(dev))
- enable_irq_wake(pwrkey->irq);
+ error = of_property_read_u32(np, "linux,code", keycode);
+ if (error) {
+ if (default_keycode == KEY_RESERVED) {
+ dev_err(pwrkey->dev,
+ "failed to read key-code for %s key\n",
+ keyname);
+ return error;
+ }
+
+ *keycode = default_keycode;
+ }
- return 0;
-}
+ /* Register key configuration */
+ input_set_capability(pwrkey->input, EV_KEY, *keycode);
-static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
-{
- struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+ pull_up = of_property_read_bool(np, "bias-pull-up");
+ error = regmap_update_bits(pwrkey->regmap,
+ pwrkey->baseaddr + PON_PULL_CTL,
+ pull_up_bit, pull_up ? pull_up_bit : 0);
+ if (error) {
+ dev_err(pwrkey->dev, "failed to set %s pull: %d\n",
+ keyname, error);
+ return error;
+ }
- if (device_may_wakeup(dev))
- disable_irq_wake(pwrkey->irq);
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ dev_err(pwrkey->dev, "failed to get %s irq\n", keyname);
+ return -EINVAL;
+ }
- return 0;
-}
+ irq_devname = devm_kasprintf(pwrkey->dev,
+ GFP_KERNEL, "pm8941_%skey", keyname);
+ if (!irq_devname)
+ return -ENOMEM;
+
+ error = devm_request_threaded_irq(pwrkey->dev, irq, NULL,
+ pm8941_pwrkey_irq, IRQF_ONESHOT,
+ irq_devname, pwrkey);
+ if (error)
+ dev_err(pwrkey->dev, "failed requesting %s key IRQ: %d\n",
+ keyname, error);
-static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
- pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
+ if (wakeup) {
+ device_init_wakeup(pwrkey->dev, true);
+ dev_pm_set_wake_irq(pwrkey->dev, irq);
+ }
+
+ return error;
+}
static int pm8941_pwrkey_probe(struct platform_device *pdev)
{
struct pm8941_pwrkey *pwrkey;
- bool pull_up;
+ struct device_node *np;
u32 req_delay;
int error;
@@ -168,8 +222,6 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
return -EINVAL;
}
- pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
-
pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
if (!pwrkey)
return -ENOMEM;
@@ -182,12 +234,6 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
return -ENODEV;
}
- pwrkey->irq = platform_get_irq(pdev, 0);
- if (pwrkey->irq < 0) {
- dev_err(&pdev->dev, "failed to get irq\n");
- return pwrkey->irq;
- }
-
error = of_property_read_u32(pdev->dev.of_node, "reg",
&pwrkey->baseaddr);
if (error)
@@ -195,6 +241,18 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
&pwrkey->revision);
+ if (error) {
+ dev_err(&pdev->dev, "failed to read revision: %d\n", error);
+ return error;
+ }
+
+ req_delay = (req_delay << 6) / USEC_PER_SEC;
+ req_delay = ilog2(req_delay);
+
+ error = regmap_update_bits(pwrkey->regmap,
+ pwrkey->baseaddr + PON_DBC_CTL,
+ PON_DBC_DELAY_MASK,
+ req_delay);
if (error) {
dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
return error;
@@ -211,34 +269,36 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
pwrkey->input->name = "pm8941_pwrkey";
pwrkey->input->phys = "pm8941_pwrkey/input0";
- req_delay = (req_delay << 6) / USEC_PER_SEC;
- req_delay = ilog2(req_delay);
- error = regmap_update_bits(pwrkey->regmap,
- pwrkey->baseaddr + PON_DBC_CTL,
- PON_DBC_DELAY_MASK,
- req_delay);
- if (error) {
- dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
- return error;
+ np = of_get_child_by_name(pdev->dev.of_node, "power");
+ if (!np) {
+ /*
+ * Fall back to older format with power key properties
+ * attached to the device itself.
+ */
+ of_node_get(pdev->dev.of_node);
}
- error = regmap_update_bits(pwrkey->regmap,
- pwrkey->baseaddr + PON_PULL_CTL,
- PON_KPDPWR_PULL_UP,
- pull_up ? PON_KPDPWR_PULL_UP : 0);
+ error = pm8941_key_init(np, pwrkey, &pwrkey->power_keycode, KEY_POWER,
+ PON_KPDPWR_PULL_UP, "pwr", true);
+ of_node_put(np);
if (error) {
- dev_err(&pdev->dev, "failed to set pull: %d\n", error);
+ dev_err(&pdev->dev,
+ "failed power key initialization: %d\n", error);
return error;
}
- error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
- NULL, pm8941_pwrkey_irq,
- IRQF_ONESHOT,
- "pm8941_pwrkey", pwrkey);
- if (error) {
- dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
- return error;
+ np = of_find_node_by_name(pdev->dev.of_node, "resin");
+ if (np) {
+ error = pm8941_key_init(np, pwrkey,
+ &pwrkey->resin_keycode, KEY_RESERVED,
+ PON_RESIN_PULL_UP, "resin", false);
+ of_node_put(np);
+ if (error) {
+ dev_err(&pdev->dev,
+ "failed resin key initialization: %d\n", error);
+ return error;
+ }
}
error = input_register_device(pwrkey->input);
@@ -257,8 +317,6 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, pwrkey);
- device_init_wakeup(&pdev->dev, 1);
-
return 0;
}
@@ -282,7 +340,6 @@ static struct platform_driver pm8941_pwrkey_driver = {
.remove = pm8941_pwrkey_remove,
.driver = {
.name = "pm8941-pwrkey",
- .pm = &pm8941_pwr_key_pm_ops,
.of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
},
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
