This is pure-churn and should be a no-op. I'm doing it in the hopes
of reducing merge conflicts. When things are sorted in a sane way
(and by base address seems sane) then it's less likely that future
patches will cause merge conflicts.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 152 +++++++++++++--------------
1 file changed, 76 insertions(+), 76 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 486ace9a9e8b..101350743bd2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -158,32 +158,50 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
- intc: interrupt-controller@17a00000 {
- compatible = "arm,gic-v3";
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sdm845";
+ reg = <0x100000 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0xac0000 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc 105>,
+ <&gcc 106>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x17a00000 0x10000>, /* GICD */
- <0x17a60000 0x100000>; /* GICR * 8 */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
- gic-its@17a40000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0x17a40000 0x20000>;
+ uart2: serial@a84000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0xa84000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc 89>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_uart2_default>;
+ pinctrl-1 = <&qup_uart2_sleep>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- };
- gcc: clock-controller@100000 {
- compatible = "qcom,gcc-sdm845";
- reg = <0x100000 0x1f0000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0xa88000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc 91>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_i2c10_default>;
+ pinctrl-1 = <&qup_i2c10_sleep>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
tlmm: pinctrl@3400000 {
@@ -224,6 +242,45 @@
};
};
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0xc440000 0x1100>,
+ <0xc600000 0x2000000>,
+ <0xe600000 0x100000>,
+ <0xe700000 0xa0000>,
+ <0xc40a000 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x17a00000 0x10000>, /* GICD */
+ <0x17a60000 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ gic-its@17a40000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x17a40000 0x20000>;
+ status = "disabled";
+ };
+ };
+
timer@17c90000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -281,62 +338,5 @@
status = "disabled";
};
};
-
- spmi_bus: spmi@c440000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0xc440000 0x1100>,
- <0xc600000 0x2000000>,
- <0xe600000 0x100000>,
- <0xe700000 0xa0000>,
- <0xc40a000 0x26000>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- cell-index = <0>;
- };
-
- geniqup@ac0000 {
- compatible = "qcom,geni-se-qup";
- reg = <0xac0000 0x6000>;
- clock-names = "m-ahb", "s-ahb";
- clocks = <&gcc 105>,
- <&gcc 106>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- uart2: serial@a84000 {
- compatible = "qcom,geni-debug-uart";
- reg = <0xa84000 0x4000>;
- clock-names = "se";
- clocks = <&gcc 89>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qup_uart2_default>;
- pinctrl-1 = <&qup_uart2_sleep>;
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- i2c10: i2c@a88000 {
- compatible = "qcom,geni-i2c";
- reg = <0xa88000 0x4000>;
- clock-names = "se";
- clocks = <&gcc 91>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qup_i2c10_default>;
- pinctrl-1 = <&qup_i2c10_sleep>;
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
- };
};
};
--
2.17.0.441.gb46fe60e1d-goog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
