On Thu, May 03, 2018 at 02:30:48PM +0200, Geert Uytterhoeven wrote:
> Hi Simon, Magnus,
>
> The ROHM BD9571MWV PMIC on the Renesas Salvator-X(S) and ULCB
> development boards supports DDR Backup Power, which means that the DDR
> power rails can be kept powered while the main SoC is powered down.
>
> For this to function correctly, the DDR Backup Power configuration
> must be described in DT, which is the topic of this series:
> - The first patch adds the missing device node for the BD9571 PMIC on
> the ULCB boards,
> - The last two patches add DDR Backup Mode configuration for
> Salvator-X(S) and ULCB.
>
> Changes compared to v3:
> - Use a hex value for the bit mask.
>
> Changes compared to v2:
> - Add support for ULCB,
> - Add "rohm,rstbmode-level" for Salvator-X(S).
>
> The relevant DT binding updates have been accepted in
> regulator/for-next, as well as driver support for DDR Backup Mode on
> systems with momentary power switches ("rohm,rstbmode-pulse"), like
> ULCB. Combined with this series, the PMIC on ULCB will be configured
> automatically during system suspend.
>
> Note that driver support for systems with toggle power swiches
> ("rohm,rstbmode-level"), like Salvator-X(S), is still under review
> (https://lkml.org/lkml/2018/3/14/324). But as DT describes hardware,
> not software limitations, this series is safe to apply.
>
> This has been tested on M3ULCB (thanks Jacopo!), and on Salvator-X(S).
> All support has been part of renesas-drivers since a few releases.
>
> Thanks for applying!
Thanks, applied.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
