On Fri, Apr 27, 2018 at 02:58:08PM +0800, Anson Huang wrote:
> There is a debug LED(D11) connected to GPIO1_IO24, add
> support for it.
>
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
> this patch is based on patch series (ARM: dts: imx6sx-sabreauto: add wdog external reset support).
In this case, you can include these two patches into the series, if you
need to resend the series.
Shawn
> arch/arm/boot/dts/imx6sx-sabreauto.dts | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> index eb1452c..6b94f24 100644
> --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> @@ -18,6 +18,18 @@
> reg = <0x80000000 0x80000000>;
> };
>
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_led>;
> +
> + user {
> + label = "debug";
> + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> regulators {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -119,6 +131,12 @@
> &iomuxc {
> imx6x-sabreauto {
>
> + pinctrl_led: ledgrp {
> + fsl,pins = <
> + MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
> + >;
> + };
> +
Try to sort the pinctrl node alphabetically.
Shawn
> pinctrl_enet1_1: enet1grp-1 {
> fsl,pins = <
> MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
