The clk32 clock is an input clock to CCM module, and should be defined
in soc dtsi rather than a board level dts. Let's move it into
imx1.dtsi.
While at it, let's drop unnecessary #address-cells/#size-cells from
'clocks' node to DTC warning avoid_unnecessary_addr_size seen with W=1
switch.
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
---
arch/arm/boot/dts/imx1-ads.dts | 11 -----------
arch/arm/boot/dts/imx1.dtsi | 8 ++++++++
2 files changed, 8 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts
index 6354e4c87313..a1d81badb5c8 100644
--- a/arch/arm/boot/dts/imx1-ads.dts
+++ b/arch/arm/boot/dts/imx1-ads.dts
@@ -23,17 +23,6 @@
memory@8000000 {
reg = <0x08000000 0x04000000>;
};
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32 {
- compatible = "fsl,imx-clk32", "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32000>;
- };
- };
};
&cspi1 {
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index f7b9edf93f5e..78cba9435f8e 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -62,6 +62,14 @@
};
};
+ clocks {
+ clk32 {
+ compatible = "fsl,imx-clk32", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
