[PATCH 5/7] IBM Currituck: Clean up board specific code before adding Akebono code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The IBM Akebono code uses the same initialisation functions as the
earlier Currituck board. Rather than create a copy of this code for
Akebono we will instead integrate support for it into the same file as
the Currituck code.

This patch just renames the board support file and updates the Makefile.

Signed-off-by: Alistair Popple <alistair@xxxxxxxxxxxx>
---
 arch/powerpc/platforms/44x/Makefile    |    2 +-
 arch/powerpc/platforms/44x/currituck.c |  233 --------------------------------
 arch/powerpc/platforms/44x/ppc476.c    |  233 ++++++++++++++++++++++++++++++++
 3 files changed, 234 insertions(+), 234 deletions(-)
 delete mode 100644 arch/powerpc/platforms/44x/currituck.c
 create mode 100644 arch/powerpc/platforms/44x/ppc476.c

diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index d03833a..f896b89 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -10,4 +10,4 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
 obj-$(CONFIG_ISS4xx)	+= iss4xx.o
 obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
-obj-$(CONFIG_CURRITUCK)	+= currituck.o
+obj-$(CONFIG_CURRITUCK)	+= ppc476.o
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
deleted file mode 100644
index 7f1b71a..0000000
--- a/arch/powerpc/platforms/44x/currituck.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Currituck board specific routines
- *
- * Copyright © 2011 Tony Breeds IBM Corporation
- *
- * Based on earlier code:
- *    Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
- *    Copyright 2002-2005 MontaVista Software Inc.
- *
- *    Eugene Surovegin <eugene.surovegin@xxxxxxxxxx> or <ebs@xxxxxxxxxxx>
- *    Copyright (c) 2003-2005 Zultys Technologies
- *
- *    Rewritten and ported to the merged powerpc tree:
- *    Copyright 2007 David Gibson <dwg@xxxxxxxxxxx>, IBM Corporation.
- *    Copyright © 2011 David Kliekamp IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/ppc4xx.h>
-#include <asm/mpic.h>
-#include <asm/mmu.h>
-
-#include <linux/pci.h>
-
-static __initdata struct of_device_id ppc47x_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,plb6", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-/* The EEPROM is missing and the default values are bogus.  This forces USB in
- * to EHCI mode */
-static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
-{
-	if (of_machine_is_compatible("ibm,currituck")) {
-		pci_write_config_dword(dev, 0xe0, 0x0114231f);
-		pci_write_config_dword(dev, 0xe4, 0x00006c40);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
-
-static int __init ppc47x_device_probe(void)
-{
-	of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(ppc47x, ppc47x_device_probe);
-
-/* We can have either UICs or MPICs */
-static void __init ppc47x_init_irq(void)
-{
-	struct device_node *np;
-
-	/* Find top level interrupt controller */
-	for_each_node_with_property(np, "interrupt-controller") {
-		if (of_get_property(np, "interrupts", NULL) == NULL)
-			break;
-	}
-	if (np == NULL)
-		panic("Can't find top level interrupt controller");
-
-	/* Check type and do appropriate initialization */
-	if (of_device_is_compatible(np, "chrp,open-pic")) {
-		/* The MPIC driver will get everything it needs from the
-		 * device-tree, just pass 0 to all arguments
-		 */
-		struct mpic *mpic =
-			mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC     ");
-		BUG_ON(mpic == NULL);
-		mpic_init(mpic);
-		ppc_md.get_irq = mpic_get_irq;
-	} else
-		panic("Unrecognized top level interrupt controller");
-}
-
-#ifdef CONFIG_SMP
-static void smp_ppc47x_setup_cpu(int cpu)
-{
-	mpic_setup_this_cpu();
-}
-
-static int smp_ppc47x_kick_cpu(int cpu)
-{
-	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
-	const u64 *spin_table_addr_prop;
-	u32 *spin_table;
-	extern void start_secondary_47x(void);
-
-	BUG_ON(cpunode == NULL);
-
-	/* Assume spin table. We could test for the enable-method in
-	 * the device-tree but currently there's little point as it's
-	 * our only supported method
-	 */
-	spin_table_addr_prop =
-		of_get_property(cpunode, "cpu-release-addr", NULL);
-
-	if (spin_table_addr_prop == NULL) {
-		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
-		       cpu);
-		return 1;
-	}
-
-	/* Assume it's mapped as part of the linear mapping. This is a bit
-	 * fishy but will work fine for now
-	 *
-	 * XXX: Is there any reason to assume differently?
-	 */
-	spin_table = (u32 *)__va(*spin_table_addr_prop);
-	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
-
-	spin_table[3] = cpu;
-	smp_wmb();
-	spin_table[1] = __pa(start_secondary_47x);
-	mb();
-
-	return 0;
-}
-
-static struct smp_ops_t ppc47x_smp_ops = {
-	.probe		= smp_mpic_probe,
-	.message_pass	= smp_mpic_message_pass,
-	.setup_cpu	= smp_ppc47x_setup_cpu,
-	.kick_cpu	= smp_ppc47x_kick_cpu,
-	.give_timebase	= smp_generic_give_timebase,
-	.take_timebase	= smp_generic_take_timebase,
-};
-
-static void __init ppc47x_smp_init(void)
-{
-	if (mmu_has_feature(MMU_FTR_TYPE_47x))
-		smp_ops = &ppc47x_smp_ops;
-}
-
-#else /* CONFIG_SMP */
-static void __init ppc47x_smp_init(void) { }
-#endif /* CONFIG_SMP */
-
-static void __init ppc47x_setup_arch(void)
-{
-
-	/* No need to check the DMA config as we /know/ our windows are all of
- 	 * RAM.  Lets hope that doesn't change */
-	swiotlb_detect_4g();
-
-	ppc47x_smp_init();
-}
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init ppc47x_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
-		return 0;
-
-	return 1;
-}
-
-static int board_rev = -1;
-static int __init ppc47x_get_board_rev(void)
-{
-	u8 fpga_reg0;
-	void *fpga;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
-	if (!np)
-		goto fail;
-
-	fpga = of_iomap(np, 0);
-	of_node_put(np);
-	if (!fpga)
-		goto fail;
-
-	fpga_reg0 = ioread8(fpga);
-	board_rev = fpga_reg0 & 0x03;
-	pr_info("%s: Found board revision %d\n", __func__, board_rev);
-	iounmap(fpga);
-	return 0;
-
-fail:
-	pr_info("%s: Unable to find board revision\n", __func__);
-	return 0;
-}
-machine_arch_initcall(ppc47x, ppc47x_get_board_rev);
-
-/* Use USB controller should have been hardware swizzled but it wasn't :( */
-static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
-{
-	if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
-	                              dev->device == 0x00e0)) {
-		if (board_rev == 0) {
-			dev->irq = irq_create_mapping(NULL, 47);
-			pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
-		} else if (board_rev == 2) {
-			dev->irq = irq_create_mapping(NULL, 49);
-			pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
-		} else {
-			pr_alert("%s: Unknown board revision\n", __func__);
-		}
-	}
-}
-
-define_machine(ppc47x) {
-	.name			= "PowerPC 47x",
-	.probe			= ppc47x_probe,
-	.progress		= udbg_progress,
-	.init_IRQ		= ppc47x_init_irq,
-	.setup_arch		= ppc47x_setup_arch,
-	.pci_irq_fixup		= ppc47x_pci_irq_fixup,
-	.restart		= ppc4xx_reset_system,
-	.calibrate_decr		= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/ppc476.c b/arch/powerpc/platforms/44x/ppc476.c
new file mode 100644
index 0000000..c6c5a6f
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc476.c
@@ -0,0 +1,233 @@
+/*
+ * PowerPC 476FPE board specific routines
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ *    Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
+ *    Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *    Eugene Surovegin <eugene.surovegin@xxxxxxxxxx> or <ebs@xxxxxxxxxxx>
+ *    Copyright (c) 2003-2005 Zultys Technologies
+ *
+ *    Rewritten and ported to the merged powerpc tree:
+ *    Copyright 2007 David Gibson <dwg@xxxxxxxxxxx>, IBM Corporation.
+ *    Copyright © 2011 David Kliekamp IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+#include <linux/pci.h>
+
+static struct of_device_id ppc47x_of_bus[] __initdata = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,plb6", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+/* The EEPROM is missing and the default values are bogus.  This forces USB in
+ * to EHCI mode */
+static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
+{
+	if (of_machine_is_compatible("ibm,currituck")) {
+		pci_write_config_dword(dev, 0xe0, 0x0114231f);
+		pci_write_config_dword(dev, 0xe4, 0x00006c40);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+
+static int __init ppc47x_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(ppc47x, ppc47x_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init ppc47x_init_irq(void)
+{
+	struct device_node *np;
+
+	/* Find top level interrupt controller */
+	for_each_node_with_property(np, "interrupt-controller") {
+		if (of_get_property(np, "interrupts", NULL) == NULL)
+			break;
+	}
+	if (np == NULL)
+		panic("Can't find top level interrupt controller");
+
+	/* Check type and do appropriate initialization */
+	if (of_device_is_compatible(np, "chrp,open-pic")) {
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		struct mpic *mpic =
+			mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC     ");
+		BUG_ON(mpic == NULL);
+		mpic_init(mpic);
+		ppc_md.get_irq = mpic_get_irq;
+	} else
+		panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void smp_ppc47x_setup_cpu(int cpu)
+{
+	mpic_setup_this_cpu();
+}
+
+static int smp_ppc47x_kick_cpu(int cpu)
+{
+	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+	const u64 *spin_table_addr_prop;
+	u32 *spin_table;
+	extern void start_secondary_47x(void);
+
+	BUG_ON(cpunode == NULL);
+
+	/* Assume spin table. We could test for the enable-method in
+	 * the device-tree but currently there's little point as it's
+	 * our only supported method
+	 */
+	spin_table_addr_prop =
+		of_get_property(cpunode, "cpu-release-addr", NULL);
+
+	if (spin_table_addr_prop == NULL) {
+		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
+		       cpu);
+		return 1;
+	}
+
+	/* Assume it's mapped as part of the linear mapping. This is a bit
+	 * fishy but will work fine for now
+	 *
+	 * XXX: Is there any reason to assume differently?
+	 */
+	spin_table = (u32 *)__va(*spin_table_addr_prop);
+	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+	spin_table[3] = cpu;
+	smp_wmb();
+	spin_table[1] = __pa(start_secondary_47x);
+	mb();
+
+	return 0;
+}
+
+static struct smp_ops_t ppc47x_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.setup_cpu	= smp_ppc47x_setup_cpu,
+	.kick_cpu	= smp_ppc47x_kick_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+
+static void __init ppc47x_smp_init(void)
+{
+	if (mmu_has_feature(MMU_FTR_TYPE_47x))
+		smp_ops = &ppc47x_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init ppc47x_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init ppc47x_setup_arch(void)
+{
+
+	/* No need to check the DMA config as we /know/ our windows are all of
+	 * RAM.  Lets hope that doesn't change */
+	swiotlb_detect_4g();
+
+	ppc47x_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
+		return 0;
+
+	return 1;
+}
+
+static int board_rev = -1;
+static int __init ppc47x_get_board_rev(void)
+{
+	u8 fpga_reg0;
+	void *fpga;
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
+	if (!np)
+		goto fail;
+
+	fpga = of_iomap(np, 0);
+	of_node_put(np);
+	if (!fpga)
+		goto fail;
+
+	fpga_reg0 = ioread8(fpga);
+	board_rev = fpga_reg0 & 0x03;
+	pr_info("%s: Found board revision %d\n", __func__, board_rev);
+	iounmap(fpga);
+	return 0;
+
+fail:
+	pr_info("%s: Unable to find board revision\n", __func__);
+	return 0;
+}
+machine_arch_initcall(ppc47x, ppc47x_get_board_rev);
+
+/* Use USB controller should have been hardware swizzled but it wasn't :( */
+static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
+{
+	if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
+				      dev->device == 0x00e0)) {
+		if (board_rev == 0) {
+			dev->irq = irq_create_mapping(NULL, 47);
+			pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
+		} else if (board_rev == 2) {
+			dev->irq = irq_create_mapping(NULL, 49);
+			pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
+		} else {
+			pr_alert("%s: Unknown board revision\n", __func__);
+		}
+	}
+}
+
+define_machine(ppc47x) {
+	.name			= "PowerPC 47x",
+	.probe			= ppc47x_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= ppc47x_init_irq,
+	.setup_arch		= ppc47x_setup_arch,
+	.pci_irq_fixup		= ppc47x_pci_irq_fixup,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux