Signed-off-by: Robert Chiras <robert.chiras@xxxxxxx>
---
.../bindings/display/panel/raydium,rm67191.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
new file mode 100644
index 0000000..0fe6d4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
@@ -0,0 +1,38 @@
+Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
+
+Required properties:
+- compatible: "raydium,rm67191"
+- reg: virtual channel for MIPI-DSI protocol
+ must be <0>
+- dsi-lanes: number of DSI lanes to be used
+ must be <3> or <4>
+- port: input port node with endpoint definition as
+ defined in Documentation/devicetree/bindings/graph.txt;
+ the input port should be connected to a MIPI-DSI device
+ driver
+
+Optional properties:
+- reset-gpio: a GPIO spec for the RST_B GPIO pin
+- pinctrl-0 phandle to the pin settings for the reset pin
+- panel-width-mm: physical panel width [mm]
+- panel-height-mm: physical panel height [mm]
+
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
+
+Example:
+
+ panel@0 {
+ compatible = "raydium,rm67191";
+ reg = <0>;
+ pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>;
+ reset-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ dsi-lanes = <4>;
+ panel-width-mm = <68>;
+ panel-height-mm = <121>;
+
+ port {
+ panel1_in: endpoint {
+ remote-endpoint = <&mipi1_out>;
+ };
+ };
+ };
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
