On Wed, 2018-05-02 at 11:09 +0100, Marc Zyngier wrote:
> On 02/05/18 10:41, Honghui Zhang wrote:
> > On Mon, 2018-04-30 at 12:03 +0100, Marc Zyngier wrote:
> >> Hi Zhang,
> >>
> >> On 20/04/18 06:25, honghui.zhang@xxxxxxxxxxxx wrote:
> >>> From: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
> >>>
> >>> Using irq_chip solution to setup IRQs for the consistent with IRQ framework.
> >>>
> >>> Signed-off-by: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
> >>> ---
> >>> drivers/pci/host/pcie-mediatek.c | 192 +++++++++++++++++++++------------------
> >>> 1 file changed, 105 insertions(+), 87 deletions(-)
> >>>
> >>> diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
> >>> index c3dc549..1d9c6f1 100644
> >>> --- a/drivers/pci/host/pcie-mediatek.c
> >>> +++ b/drivers/pci/host/pcie-mediatek.c
> >>> @@ -11,8 +11,10 @@
> >>> #include <linux/delay.h>
> >>> #include <linux/iopoll.h>
> >>> #include <linux/irq.h>
> >>> +#include <linux/irqchip/chained_irq.h>
> >>> #include <linux/irqdomain.h>
> >>> #include <linux/kernel.h>
> >>> +#include <linux/msi.h>
> >>> #include <linux/of_address.h>
> >>> #include <linux/of_pci.h>
> >>> #include <linux/of_platform.h>
> >>> @@ -130,14 +132,12 @@ struct mtk_pcie_port;
> >>> /**
> >>> * struct mtk_pcie_soc - differentiate between host generations
> >>> * @need_fix_class_id: whether this host's class ID needed to be fixed or not
> >>> - * @has_msi: whether this host supports MSI interrupts or not
> >>> * @ops: pointer to configuration access functions
> >>> * @startup: pointer to controller setting functions
> >>> * @setup_irq: pointer to initialize IRQ functions
> >>> */
> >>> struct mtk_pcie_soc {
> >>> bool need_fix_class_id;
> >>> - bool has_msi;
> >>> struct pci_ops *ops;
> >>> int (*startup)(struct mtk_pcie_port *port);
> >>> int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
> >>> @@ -161,7 +161,9 @@ struct mtk_pcie_soc {
> >>> * @lane: lane count
> >>> * @slot: port slot
> >>> * @irq_domain: legacy INTx IRQ domain
> >>> + * @inner_domain: inner IRQ domain
> >>> * @msi_domain: MSI IRQ domain
> >>> + * @lock: protect the msi_irq_in_use bitmap
> >>> * @msi_irq_in_use: bit map for assigned MSI IRQ
> >>> */
> >>> struct mtk_pcie_port {
> >>> @@ -179,7 +181,9 @@ struct mtk_pcie_port {
> >>> u32 lane;
> >>> u32 slot;
> >>> struct irq_domain *irq_domain;
> >>> + struct irq_domain *inner_domain;
> >>> struct irq_domain *msi_domain;
> >>> + struct mutex lock;
> >>> DECLARE_BITMAP(msi_irq_in_use, MTK_MSI_IRQS_NUM);
> >>> };
> >>>
> >>> @@ -446,103 +450,122 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
> >>> return 0;
> >>> }
> >>>
> >>> -static int mtk_pcie_msi_alloc(struct mtk_pcie_port *port)
> >>> +static void mtk_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> >>> {
> >>> - int msi;
> >>> + struct mtk_pcie_port *port = irq_data_get_irq_chip_data(data);
> >>> + phys_addr_t addr;
> >>>
> >>> - msi = find_first_zero_bit(port->msi_irq_in_use, MTK_MSI_IRQS_NUM);
> >>> - if (msi < MTK_MSI_IRQS_NUM)
> >>> - set_bit(msi, port->msi_irq_in_use);
> >>> - else
> >>> - return -ENOSPC;
> >>> + /* MT2712/MT7622 only support 32-bit MSI addresses */
> >>> + addr = virt_to_phys(port->base + PCIE_MSI_VECTOR);
> >>> + msg->address_hi = 0;
> >>> + msg->address_lo = lower_32_bits(addr);
> >>>
> >>> - return msi;
> >>> + msg->data = data->hwirq;
> >>> +
> >>> + dev_dbg(port->pcie->dev, "msi#%d address_hi %#x address_lo %#x\n",
> >>> + (int)data->hwirq, msg->address_hi, msg->address_lo);
> >>> }
> >>>
> >>> -static void mtk_pcie_msi_free(struct mtk_pcie_port *port, unsigned long hwirq)
> >>> +static int mtk_msi_set_affinity(struct irq_data *irq_data,
> >>> + const struct cpumask *mask, bool force)
> >>> {
> >>> - clear_bit(hwirq, port->msi_irq_in_use);
> >>> + return -EINVAL;
> >>> }
> >>>
> >>> -static int mtk_pcie_msi_setup_irq(struct msi_controller *chip,
> >>> - struct pci_dev *pdev, struct msi_desc *desc)
> >>> -{
> >>> - struct mtk_pcie_port *port;
> >>> - struct msi_msg msg;
> >>> - unsigned int irq;
> >>> - int hwirq;
> >>> - phys_addr_t msg_addr;
> >>> +static struct irq_chip mtk_msi_bottom_irq_chip = {
> >>> + .name = "MTK MSI",
> >>> + .irq_compose_msi_msg = mtk_compose_msi_msg,
> >>> + .irq_set_affinity = mtk_msi_set_affinity,
> >>> + .irq_mask = pci_msi_mask_irq,
> >>> + .irq_unmask = pci_msi_unmask_irq,
> >>> +};
> >>>
> >>> - port = mtk_pcie_find_port(pdev->bus, pdev->devfn);
> >>> - if (!port)
> >>> - return -EINVAL;
> >>> +static int mtk_pcie_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> >>> + unsigned int nr_irqs, void *args)
> >>> +{
> >>> + struct mtk_pcie_port *port = domain->host_data;
> >>> + unsigned long bit;
> >>>
> >>> - hwirq = mtk_pcie_msi_alloc(port);
> >>> - if (hwirq < 0)
> >>> - return hwirq;
> >>> + WARN_ON(nr_irqs != 1);
> >>> + mutex_lock(&port->lock);
> >>>
> >>> - irq = irq_create_mapping(port->msi_domain, hwirq);
> >>> - if (!irq) {
> >>> - mtk_pcie_msi_free(port, hwirq);
> >>> - return -EINVAL;
> >>> + bit = find_first_zero_bit(port->msi_irq_in_use, MTK_MSI_IRQS_NUM);
> >>> + if (bit >= MTK_MSI_IRQS_NUM) {
> >>> + mutex_unlock(&port->lock);
> >>> + return -ENOSPC;
> >>> }
> >>>
> >>> - chip->dev = &pdev->dev;
> >>> -
> >>> - irq_set_msi_desc(irq, desc);
> >>> + __set_bit(bit, port->msi_irq_in_use);
> >>>
> >>> - /* MT2712/MT7622 only support 32-bit MSI addresses */
> >>> - msg_addr = virt_to_phys(port->base + PCIE_MSI_VECTOR);
> >>> - msg.address_hi = 0;
> >>> - msg.address_lo = lower_32_bits(msg_addr);
> >>> - msg.data = hwirq;
> >>> + mutex_unlock(&port->lock);
> >>>
> >>> - pci_write_msi_msg(irq, &msg);
> >>> + irq_domain_set_info(domain, virq, bit, &mtk_msi_bottom_irq_chip,
> >>> + domain->host_data, handle_simple_irq,
> >>
> >> Why don't you handle the interrupt as an edge interrupt
> >> (handle_edge_irq)? That's what it really is, and the fact that you use
> >> "handle_simple_irq" makes me think that wou're papering over some other
> >> issue (see below).
> >
> > Hi, Marc,
> >
> > Thanks very much for your comments.
> >
> > I guess the MSI irq is more like a level IRQ instead of edge IRQ.
> > When a MSI IRQ arrived, the corresponding bit of MSI status register
> > will be asserted and stay asserted until it's been cleared by software.
>
> There is some confusion here. The MSI itself is always edge-triggered.
> That's by definition, and you cannot change it. The interrupt that is
> used to signal that MSIs are pending (the multiplexing interrupt) can
> itself be level triggered (and goes low once all the MSIs have been
> acknowledged).
Hi, Marc, thanks for your comments.
Yes, PCIe SPEC have defined that the MSI must be edge trigged. But I'm
not sure whether the HW design needed to following some edge irq
standard. In our design, when there's MSI irq trigged(which may is edge
trigged in hw implemented), the corresponding msi irq status bits will
be asserted until it's been cleared by software. It's more like that the
HW IP have translate the edge irq to level status. Do you think using
handle_level_irq or handle_simple_irq(which most of the pci host driver
now doing) is acceptable in this case?
BTW, I'm still struggling in trying the handle_edge_irq solution. Seems
that I could not get the msi index in irq_ack callback from
irq_data->hwirq, the hwirq was set by pci_msi_domain_calc_hwirq() which
I'm still try to figure out the proper routine in my driver.
thanks.
>
> > I will try to using handle_level_irq and add some callbacks of irq_ack
> > in the next version.
>
> The interrupt above seem to be the MSI itself, and not the multiplexing
> interrupt. It should be handled as an edge.
>
> If that doesn't work, we need to understand why.
>
> Thanks,
>
> M.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
