Hi Amélie,
On 04/24/2018 01:24 PM, Amelie Delaunay wrote:
Add support for USBH (USB Host) to STM32MP157C SoC.
USBH is a USB Host controller supporting the standard registers used for
full- and low-speed (OHCI controller) and high-speed (EHCI controller).
Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index bc3eddc..cc06d6b 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -5,6 +5,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
/ {
#address-cells = <1>;
@@ -167,6 +168,25 @@
#reset-cells = <1>;
};
+ usbh_ohci: usbh-ohci@5800c000 {
+ compatible = "generic-ohci";
+ reg = <0x5800c000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ usbh_ehci: usbh-ehci@5800d000 {
+ compatible = "generic-ehci";
+ reg = <0x5800d000 0x1000>;
+ clocks = <&rcc USBH>;
+ resets = <&rcc USBH_R>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ companion = <&usbh_ohci>;
+ status = "disabled";
+ };
+
usart1: serial@5c000000 {
compatible = "st,stm32h7-uart";
reg = <0x5c000000 0x400>;
Applied on stm32-next.
Thanks.
Alex
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
