Matt, 2014-02-03 13:30 GMT-08:00 Marc Carino <marc.ceeeee@xxxxxxxxx>: > This patchset contains the board support package for the > Broadcom BCM7445 ARM-based SoC [1]. These changes contain a > minimal set of code needed for a BCM7445-based board to boot > the Linux kernel. If you are happy with this round of changes, can you also carry those patches in your tree for 3.15? > > These changes heavily leverage the OF/devicetree framework. > > v6: > - rebased to v3.14-rc1 > - utilize common APIs for handling CPU power-down > - drop deprecated __cpuinit attributes > > v5 (https://lkml.org/lkml/2014/1/21/640): > - rebased to v3.13 tag > - make UART DT node a child of 'rdb' node > - fix ordering of debug UART entries > > v4 (https://lkml.org/lkml/2014/1/17/455): > - make a reboot driver and put it in the drivers folder > - rework DT bindings to leverage 'syscon' > - rework BSP code to use 'syscon' for all register mappings > - misc. tweaks per suggestions from v3 > > v3 (https://lkml.org/lkml/2014/1/14/696): > - rebased to v3.13-rc8 > - switched to using 'multi_v7_defconfig' > - eliminated dependence on compile-time peripheral register access > - moved DT node iomap out from 'init_early' > - misc. minor cleanups from mailing-list discussion for v2 > > v2 (https://lkml.org/lkml/2013/11/26/570): > - rebased to v3.13-rc1 > - moved implementation to 'mach-bcm' folder > - added CPU init for B16RM > > v1: > - initial submission > > [1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445 > > Marc Carino (8): > ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs > power: reset: Add reboot driver for brcmstb > ARM: brcmstb: add debug UART for earlyprintk support > ARM: do CPU-specific init for Broadcom Brahma15 cores > ARM: brcmstb: add CPU binding for Broadcom Brahma15 > ARM: brcmstb: add misc. DT bindings for brcmstb > ARM: brcmstb: gic: add compatible string for Broadcom Brahma15 > ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 > > .../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++ > Documentation/devicetree/bindings/arm/cpus.txt | 1 + > Documentation/devicetree/bindings/arm/gic.txt | 1 + > arch/arm/Kconfig.debug | 15 +- > arch/arm/boot/dts/bcm7445.dts | 111 +++++++ > arch/arm/configs/multi_v7_defconfig | 1 + > arch/arm/mach-bcm/Kconfig | 15 + > arch/arm/mach-bcm/Makefile | 4 + > arch/arm/mach-bcm/brcmstb.c | 104 +++++++ > arch/arm/mach-bcm/brcmstb.h | 38 +++ > arch/arm/mach-bcm/headsmp-brcmstb.S | 33 ++ > arch/arm/mach-bcm/hotplug-brcmstb.c | 311 ++++++++++++++++++++ > arch/arm/mm/proc-v7.S | 11 + > drivers/power/reset/Kconfig | 10 + > drivers/power/reset/Makefile | 1 + > drivers/power/reset/brcmstb-reboot.c | 120 ++++++++ > 16 files changed, 870 insertions(+), 1 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt > create mode 100644 arch/arm/boot/dts/bcm7445.dts > create mode 100644 arch/arm/mach-bcm/brcmstb.c > create mode 100644 arch/arm/mach-bcm/brcmstb.h > create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S > create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c > create mode 100644 drivers/power/reset/brcmstb-reboot.c > -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
