From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx> The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and provide input and output FIFO's for it. I2C controller can operate as master with supported bus speeds of 100Kbps and 400Kbps. Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx> [bjorn: reformulated part of binding description added version to compatible cleaned up example] Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx> --- .../devicetree/bindings/i2c/qcom,i2c-qup.txt | 44 ++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt new file mode 100644 index 0000000..38d505f --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt @@ -0,0 +1,44 @@ +Qualcomm Universal Peripheral (QUP) I2C controller + +Required properties: + - compatible: Should be + "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064. + "qcom,i2c-qup-v2.1.1" for 8974 v1. + "qcom,i2c-qup-v2.2.1" for 8974 v2 and later. + - reg: Should contain QUP register address and length. + - interrupts: Should contain I2C interrupt. + + - clocks: Should contain the core clock and the AHB clock. + - clock-names: Should be "core" for the core clock and "iface" for the + AHB clock. + + - #address-cells: Should be <1> Address cells for i2c device address + - #size-cells: Should be <0> as i2c addresses have no size component + +Optional properties: + - clock-frequency: Should specify the desired i2c bus clock frequency in Hz, + defaults to 100kHz if omitted. + +Child nodes should conform to i2c bus binding. + +Example: + + i2c@f9924000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9924000 0x1000>; + interrupts = <0 96 0>; + + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + + clock-frequency = <355000>; + + #address-cells = <1>; + #size-cells = <0>; + + dummy@60 { + compatible = "dummy"; + reg = <0x60>; + }; + }; + -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html