Re: [PATCH v6 2/3] clk: qcom: Add support for BRANCH_NO_DELAY flag for branch clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Amit Nischal (2018-04-30 09:20:09)
> diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
> index 284df3f..5d621f3 100644
> --- a/drivers/clk/qcom/clk-branch.h
> +++ b/drivers/clk/qcom/clk-branch.h
> @@ -42,6 +42,7 @@ struct clk_branch {
>  #define BRANCH_HALT_ENABLE             1 /* pol: 0 = halt */
>  #define BRANCH_HALT_ENABLE_VOTED       (BRANCH_HALT_ENABLE | BRANCH_VOTED)
>  #define BRANCH_HALT_DELAY              2 /* No bit to check; just delay */
> +#define BRANCH_NO_DELAY                        3 /* No bit to check; without delay */

Let's call it BRANCH_HALT_SKIP and indicate that it's skipping the halt
bit check. Technically there is a bit to check, we just refuse to check
it. I've reworked and applied this patch as below.

>From f9ddbd74bf4940d3b7a0eb076eb254833660643c Mon Sep 17 00:00:00 2001
From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
Date: Mon, 30 Apr 2018 21:50:09 +0530
Subject: [PATCH] clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch
 clocks

There could be few clocks where the clock status bit is not
required to be polled as the clock on/off would be controlled
by enabling/disabling external source. Add support for the
same by introducing new flag named as 'BRANCH_HALT_SKIP'.

Signed-off-by: Amit Nischal <anischal@xxxxxxxxxxxxxx>
[sboyd@xxxxxxxxxx: Rename flag to BRANCH_HALT_SKIP]
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxx>
---
 drivers/clk/qcom/clk-branch.c | 7 +++++--
 drivers/clk/qcom/clk-branch.h | 1 +
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
index 26f7af315066..c58c5538b1b6 100644
--- a/drivers/clk/qcom/clk-branch.c
+++ b/drivers/clk/qcom/clk-branch.c
@@ -77,8 +77,11 @@ static int clk_branch_wait(const struct clk_branch *br, bool enabling,
 	bool voted = br->halt_check & BRANCH_VOTED;
 	const char *name = clk_hw_get_name(&br->clkr.hw);
 
-	/* Skip checking halt bit if the clock is in hardware gated mode */
-	if (clk_branch_in_hwcg_mode(br))
+	/*
+	 * Skip checking halt bit if we're explicitly ignoring the bit or the
+	 * clock is in hardware gated mode
+	 */
+	if (br->halt_check == BRANCH_HALT_SKIP || clk_branch_in_hwcg_mode(br))
 		return 0;
 
 	if (br->halt_check == BRANCH_HALT_DELAY || (!enabling && voted)) {
diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
index 284df3f3c55f..1702efb1c511 100644
--- a/drivers/clk/qcom/clk-branch.h
+++ b/drivers/clk/qcom/clk-branch.h
@@ -42,6 +42,7 @@ struct clk_branch {
 #define BRANCH_HALT_ENABLE		1 /* pol: 0 = halt */
 #define BRANCH_HALT_ENABLE_VOTED	(BRANCH_HALT_ENABLE | BRANCH_VOTED)
 #define BRANCH_HALT_DELAY		2 /* No bit to check; just delay */
+#define BRANCH_HALT_SKIP		3 /* Don't check halt bit */
 
 	struct clk_regmap clkr;
 };
-- 
Sent by a computer through tubes

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux