On the R40 SoC, the RX delay chain only has a range of 0~7 (hundred
picoseconds), instead of 0~31. Also the TX delay chain is completely
absent.
This patch adds support for different ranges by adding per-compatible
maximum values in the variant data. A maximum of 0 indicates that the
delay chain is not supported or absent.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 32 +++++++++++++------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 79e104a20e20..4f5612a3c855 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -47,6 +47,12 @@
* @support_mii: Does the MAC handle MII
* @support_rmii: Does the MAC handle RMII
* @support_rgmii: Does the MAC handle RGMII
+ *
+ * @rx_delay_max: Maximum raw value for RX delay chain
+ * @tx_delay_max: Maximum raw value for TX delay chain
+ * These two also indicate the bitmask for
+ * the RX and TX delay chain registers. A
+ * value of zero indicates this is not supported.
*/
struct emac_variant {
u32 default_syscon_value;
@@ -55,6 +61,8 @@ struct emac_variant {
bool support_mii;
bool support_rmii;
bool support_rgmii;
+ u8 rx_delay_max;
+ u8 tx_delay_max;
};
/* struct sunxi_priv_data - hold all sunxi private data
@@ -91,7 +99,9 @@ static const struct emac_variant emac_variant_h3 = {
.soc_has_internal_phy = true,
.support_mii = true,
.support_rmii = true,
- .support_rgmii = true
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
};
static const struct emac_variant emac_variant_v3s = {
@@ -106,7 +116,9 @@ static const struct emac_variant emac_variant_a83t = {
.syscon_field = &sun8i_syscon_reg_field,
.soc_has_internal_phy = false,
.support_mii = true,
- .support_rgmii = true
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
};
static const struct emac_variant emac_variant_a64 = {
@@ -115,7 +127,9 @@ static const struct emac_variant emac_variant_a64 = {
.soc_has_internal_phy = false,
.support_mii = true,
.support_rmii = true,
- .support_rgmii = true
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
};
#define EMAC_BASIC_CTL0 0x00
@@ -219,9 +233,7 @@ static const struct emac_variant emac_variant_a64 = {
#define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */
/* Generic system control EMAC_CLK bits */
-#define SYSCON_ETXDC_MASK GENMASK(2, 0)
#define SYSCON_ETXDC_SHIFT 10
-#define SYSCON_ERXDC_MASK GENMASK(4, 0)
#define SYSCON_ERXDC_SHIFT 5
/* EMAC PHY Interface Type */
#define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */
@@ -847,8 +859,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
}
val /= 100;
dev_dbg(priv->device, "set tx-delay to %x\n", val);
- if (val <= SYSCON_ETXDC_MASK) {
- reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT);
+ if (val <= gmac->variant->tx_delay_max) {
+ reg &= ~(gmac->variant->tx_delay_max <<
+ SYSCON_ETXDC_SHIFT);
reg |= (val << SYSCON_ETXDC_SHIFT);
} else {
dev_err(priv->device, "Invalid TX clock delay: %d\n",
@@ -864,8 +877,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
}
val /= 100;
dev_dbg(priv->device, "set rx-delay to %x\n", val);
- if (val <= SYSCON_ERXDC_MASK) {
- reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT);
+ if (val <= gmac->variant->rx_delay_max) {
+ reg &= ~(gmac->variant->rx_delay_max <<
+ SYSCON_ERXDC_SHIFT);
reg |= (val << SYSCON_ERXDC_SHIFT);
} else {
dev_err(priv->device, "Invalid RX clock delay: %d\n",
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
