On Tue, Apr 24, 2018 at 05:01:54PM +0200, Christophe Roullier wrote:
> Add description for Ethernet MPU families fields
>
> Signed-off-by: Christophe Roullier <christophe.roullier@xxxxxx>
> ---
> Documentation/devicetree/bindings/net/stm32-dwmac.txt | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> index 489dbcb..e9d1c4a 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> @@ -6,14 +6,26 @@ Please see stmmac.txt for the other unchanged properties.
> The device node has following properties.
>
> Required properties:
> -- compatible: Should be "st,stm32-dwmac" to select glue, and
> +- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and
> "snps,dwmac-3.50a" to select IP version.
> + For MPU family should be "st,stm32mp1-dwmac" to select
> + glue, and "snps,dwmac-4.20a" to select IP version.
> - clocks: Must contain a phandle for each entry in clock-names.
> - clock-names: Should be "stmmaceth" for the host clock.
> Should be "mac-clk-tx" for the MAC TX clock.
> Should be "mac-clk-rx" for the MAC RX clock.
> + For MPU family "ethstp" for power mode clock.
> + For MPU family need also "syscfg-clk" for SYSCFG clock.
These are in addition or instead of the first 3 clocks.
> +- interrupt-names: Should contain a list of interrupt names corresponding to
> + the interrupts in the interrupts property, if available.
You need to list the names. Seems unrelated to MPU support.
> - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
> - encompases the glue register, and the offset of the control register.
> + encompases the glue register, and the offset of the control register.
> +
> +Optional properties:
> +- clock-names: For MPU family "mac-clk-ck" for PHY without quartz
The clock is always connected whether you use it or not, right? So it
shouldn't be optional based on use.
> +- st,int-phyclk : valid only where PHY do not have quartz and need to be clock
> + by RCC
Boolean?
> +
> Example:
>
> ethernet@40028000 {
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
