Re: [PATCH 1/2] ARM: dts: am335x: Replace numeric pinmux address with macro defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

* Christina Quast <cquast@xxxxxxxxxxxx> [180430 11:23]:
> The values are extraced from the "AM335x SitaraTM Processors Technical
> Reference Manual", Section 9.3.1 CONTROL_MODULE Registers, based on the
> file autogenerated by TI PinMux.

This certainly makes things easier to mux :)

Have you verified that the registers are the same across all am335x
models and different revisions?

It used to be that different SoC revisions could have different
amount of registers and also different options in some cases.

> +#define AM335X_CONTROL_REVISION			0x0
> +#define AM335X_CONTROL_HWINFO			0x4
> +#define AM335X_CONTROL_SYSCONFIG		0x10
> +#define AM335X_CONTROL_STATUS			0x40

You should only list the padconf mux registers here, no need to
list any of the controller registers.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux