[PATCH 1/3] mfd: fsl imx25 Touchscreen ADC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This is the core driver for imx25 touchscreen/adc driver. The module
has one shared ADC and two different conversion queues which use the
ADC. The two queues are identical. Both can be used for general purpose
ADC but one is meant to be used for touchscreens.

This driver is the core which manages the central components and
registers of the TSC/ADC unit. It manages the IRQs and forwards them to
the correct components.

Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/mfd/fsl-imx25-tsadc.txt    |  46 ++++
 drivers/mfd/Kconfig                                |   9 +
 drivers/mfd/Makefile                               |   2 +
 drivers/mfd/fsl-imx25-tsadc.c                      | 234 +++++++++++++++++++++
 include/linux/mfd/imx25-tsadc.h                    | 138 ++++++++++++
 5 files changed, 429 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
 create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
 create mode 100644 include/linux/mfd/imx25-tsadc.h

diff --git a/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
new file mode 100644
index 0000000..a857af0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
@@ -0,0 +1,46 @@
+Freescale mx25 ADC/TSC multifunction device
+
+This device combines two general purpose conversion queues one used for general
+ADC and the other used for touchscreens.
+
+Required properties:
+ - compatible: Should be "fsl,imx25-tsadc".
+ - reg: Memory range of the device.
+ - interrupts: Interrupt for this device as described in
+   interrupts/interrupts.txt
+ - clocks: An 'ipg' clock defined as described in clocks/clock.txt
+ - interrupt-controller: This device is an interrupt controller. It controls
+   the interrupts of both conversion queues.
+ - #interrupt-cells: Should be '<1>'.
+ - #address-cells: Should be '<1>'.
+ - #size-cells: Should be '<1>'.
+ - ranges
+
+This device includes two conversion queues which can be added as subnodes.
+The first queue is for the touchscreen, the second for general purpose ADC.
+
+Example:
+	tscadc: tscadc@50030000 {
+		compatible = "fsl,imx25-tsadc";
+		reg = <0x50030000 0xc>;
+		interrupts = <46>;
+		clocks = <&clks 119>;
+		clock-names = "ipg";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		tsc: tcq@50030400 {
+			compatible = "fsl,imx25-tcq";
+			reg = <0x50030400 0x60>;
+			...
+		};
+
+		adc: gcq@50030800 {
+			compatible = "fsl,imx25-gcq";
+			reg = <0x50030800 0x60>;
+			...
+		};
+	};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 49bb445..5b43c72 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -163,6 +163,15 @@ config MFD_DA9063
 	  Additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_MX25_TSADC
+	depends on ARCH_MXC
+	select REGMAP_MMIO
+	tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
+	help
+	  Enable support for the integrated Touchscreen and ADC unit of the
+	  i.MX25 processors. They consist of a conversion queue for general
+	  purpose ADC and a queue for Touchscreens.
+
 config MFD_MC13XXX
 	tristate
 	depends on (SPI_MASTER || I2C)
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5aea5ef..f8c0093 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -76,6 +76,8 @@ obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
 obj-$(CONFIG_MFD_TWL4030_AUDIO)	+= twl4030-audio.o
 obj-$(CONFIG_TWL6040_CORE)	+= twl6040.o
 
+obj-$(CONFIG_MFD_MX25_TSADC)	+= fsl-imx25-tsadc.o
+
 obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
 obj-$(CONFIG_MFD_MC13XXX_SPI)	+= mc13xxx-spi.o
 obj-$(CONFIG_MFD_MC13XXX_I2C)	+= mc13xxx-i2c.o
diff --git a/drivers/mfd/fsl-imx25-tsadc.c b/drivers/mfd/fsl-imx25-tsadc.c
new file mode 100644
index 0000000..549990b
--- /dev/null
+++ b/drivers/mfd/fsl-imx25-tsadc.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2014 Markus Pargmann, Pengutronix <mpa@xxxxxxxxxxxxxx>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/mfd/imx25-tsadc.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct mx25_tsadc_priv {
+	struct regmap *regs;
+	struct irq_domain *domain;
+	struct clk *clk;
+};
+
+static struct regmap_config mx25_tsadc = {
+	.fast_io = true,
+	.max_register = 0x8,
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+struct regmap *mx25_tsadc_get_regmap(struct device *dev)
+{
+	struct platform_device *pdev;
+	struct mx25_tsadc_priv *priv;
+
+	if (!dev)
+		return NULL;
+
+	pdev = container_of(dev, struct platform_device, dev);
+	priv = platform_get_drvdata(pdev);
+	if (IS_ERR_OR_NULL(priv->regs))
+		return NULL;
+
+	return priv->regs;
+}
+EXPORT_SYMBOL(mx25_tsadc_get_regmap);
+
+struct clk *mx25_tsadc_get_ipg(struct device *dev)
+{
+	struct platform_device *pdev;
+	struct mx25_tsadc_priv *priv;
+
+	if (!dev)
+		return NULL;
+
+	pdev = container_of(dev, struct platform_device, dev);
+	priv = platform_get_drvdata(pdev);
+	if (IS_ERR_OR_NULL(priv->clk))
+		return NULL;
+
+	return priv->clk;
+}
+EXPORT_SYMBOL(mx25_tsadc_get_ipg);
+
+static void mx25_tsadc_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	struct mx25_tsadc_priv *priv = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_get_chip(irq);
+	u32 status;
+
+	chained_irq_enter(chip, desc);
+
+	regmap_read(priv->regs, MX25_TSC_TGSR, &status);
+
+	if (status & MX25_TGSR_GCQ_INT)
+		generic_handle_irq(irq_find_mapping(priv->domain, 1));
+
+	if (status & MX25_TGSR_TCQ_INT)
+		generic_handle_irq(irq_find_mapping(priv->domain, 0));
+
+	chained_irq_exit(chip, desc);
+}
+
+static void mx25_tsadc_nop(struct irq_data *d)
+{
+}
+
+static int mx25_tsadc_set_wake_nop(struct irq_data *d, unsigned int state)
+{
+	return 0;
+}
+
+static struct irq_chip mx25_tsadc_irq_chip = {
+	.name = "mx25-tsadc",
+	.irq_ack = mx25_tsadc_nop,
+	.irq_mask = mx25_tsadc_nop,
+	.irq_unmask = mx25_tsadc_nop,
+	.irq_set_wake = mx25_tsadc_set_wake_nop,
+};
+
+static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq,
+			     irq_hw_number_t hwirq)
+{
+	struct mx25_tsadc_priv *priv = d->host_data;
+
+	irq_set_chip_data(irq, priv);
+	irq_set_chip_and_handler(irq, &mx25_tsadc_irq_chip,
+				 handle_level_irq);
+
+#ifdef CONFIG_ARM
+	set_irq_flags(irq, IRQF_VALID);
+#else
+	irq_set_noprobe(irq);
+#endif
+
+	return 0;
+}
+
+static struct irq_domain_ops mx25_tsadc_domain_ops = {
+	.map = mx25_tsadc_domain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int mx25_tsadc_setup_irq(struct platform_device *pdev,
+		struct mx25_tsadc_priv *priv)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "Failed to get irq\n");
+		return irq;
+	}
+
+	priv->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops,
+			priv);
+	if (!priv->domain) {
+		dev_err(dev, "Failed to add irq domain\n");
+		return -ENOMEM;
+	}
+
+	irq_set_chained_handler(irq, mx25_tsadc_irq_handler);
+	irq_set_handler_data(irq, priv);
+
+	return 0;
+}
+
+static int mx25_tsadc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct mx25_tsadc_priv *priv;
+	struct resource *iores;
+	int ret;
+	void __iomem *iomem;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iomem = devm_ioremap_resource(dev, iores);
+	if (IS_ERR(iomem)) {
+		dev_err(dev, "Failed to remap iomem\n");
+		return PTR_ERR(iomem);
+	}
+
+	priv->regs = regmap_init_mmio(dev, iomem, &mx25_tsadc);
+	if (IS_ERR(priv->regs)) {
+		dev_err(dev, "Failed to initialize regmap\n");
+		return PTR_ERR(priv->regs);
+	}
+
+	priv->clk = devm_clk_get(dev, "ipg");
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "Failed to get ipg clock\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	/* Enable clock and reset the component */
+	regmap_update_bits(priv->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN,
+			MX25_TGCR_CLK_EN);
+	regmap_update_bits(priv->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST,
+			MX25_TGCR_TSC_RST);
+
+	/* Setup powersaving mode, but enable internal reference voltage */
+	regmap_update_bits(priv->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK,
+			MX25_TGCR_POWERMODE_SAVE);
+	regmap_update_bits(priv->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN,
+			MX25_TGCR_INTREFEN);
+
+	ret = mx25_tsadc_setup_irq(pdev, priv);
+	if (ret) {
+		dev_err(dev, "Failed to setup irqs\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	of_platform_populate(np, NULL, NULL, dev);
+
+	dev_info(dev, "i.MX25/25 Touchscreen and ADC core driver loaded\n");
+
+	return 0;
+}
+
+static const struct of_device_id mx25_tsadc_ids[] = {
+	{ .compatible = "fsl,imx25-tsadc", },
+	{ /* Sentinel */ }
+};
+
+static struct platform_driver mx25_tsadc_driver = {
+	.driver		= {
+		.name	= "mx25-tsadc",
+		.owner	= THIS_MODULE,
+		.of_match_table = mx25_tsadc_ids,
+	},
+	.probe		= mx25_tsadc_probe,
+};
+module_platform_driver(mx25_tsadc_driver);
+
+MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25");
+MODULE_AUTHOR("Markus Pargmann <mpa@xxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/imx25-tsadc.h b/include/linux/mfd/imx25-tsadc.h
new file mode 100644
index 0000000..6fba341
--- /dev/null
+++ b/include/linux/mfd/imx25-tsadc.h
@@ -0,0 +1,138 @@
+#ifndef _LINUX_INCLUDE_INPUT_IMX25_TSADC_H_
+#define _LINUX_INCLUDE_INPUT_IMX25_TSADC_H_
+
+struct regmap;
+struct device;
+struct clk;
+
+struct regmap *mx25_tsadc_get_regmap(struct device *dev);
+struct clk *mx25_tsadc_get_ipg(struct device *dev);
+
+#define MX25_TSC_TGCR 0x00
+#define MX25_TSC_TGSR 0x04
+#define MX25_TSC_TICR 0x08
+
+/* The same register layout for TC and GC queue */
+#define MX25_ADCQ_FIFO 0x00
+#define MX25_ADCQ_CR 0x04
+#define MX25_ADCQ_SR 0x08
+#define MX25_ADCQ_MR 0x0c
+#define MX25_ADCQ_ITEM_7_0 0x20
+#define MX25_ADCQ_ITEM_15_8 0x24
+#define MX25_ADCQ_CFG(n) (0x40 + ((n) * 0x4))
+
+/* Register values */
+/* Queue Config register */
+#define MX25_ADCQ_MR_MASK 0xffffffff
+
+/* TGCR */
+#define MX25_TGCR_PDBTIME(x) ((x) << 25)
+#define MX25_TGCR_PDBTIME_MASK MX25_TGCR_PDBTIME(0x7f)
+#define MX25_TGCR_PDBEN (1 << 24)
+#define MX25_TGCR_PDEN (1 << 23)
+#define MX25_TGCR_ADCCLKCFG(x) ((x) << 16)
+#define MX25_TGCR_GET_ADCCLK(x) (((x) >> 16) & 0x1f)
+#define MX25_TGCR_INTREFEN (1 << 10)
+#define MX25_TGCR_POWERMODE_MASK (3 << 8)
+#define MX25_TGCR_POWERMODE_SAVE (1 << 8)
+#define MX25_TGCR_POWERMODE_ON (2 << 8)
+#define MX25_TGCR_STLC (1 << 5)
+#define MX25_TGCR_SLPC (1 << 4)
+#define MX25_TGCR_FUNC_RST (1 << 2)
+#define MX25_TGCR_TSC_RST (1 << 1)
+#define MX25_TGCR_CLK_EN (1 << 0)
+
+/* TGSR */
+#define MX25_TGSR_SLP_INT (1 << 2)
+#define MX25_TGSR_GCQ_INT (1 << 1)
+#define MX25_TGSR_TCQ_INT (1 << 0)
+
+/* ADCQ_ITEM_* */
+#define _MX25_ADCQ_ITEM(item, x) ((x) << ((item) * 4))
+#define MX25_ADCQ_ITEM(item, x) ((item) >= 8 ? \
+		_MX25_ADCQ_ITEM((item) - 8, (x)) : _MX25_ADCQ_ITEM((item), (x)))
+
+/* ADCQ_FIFO (TCQFIFO and GCQFIFO) */
+#define MX25_ADCQ_FIFO_DATA(x) (((x) >> 4) & 0xfff)
+#define MX25_ADCQ_FIFO_ID(x) ((x) & 0xf)
+
+/* ADCQ_CR (TCQR and GCQR) */
+#define MX25_ADCQ_CR_PDCFG_LEVEL (1 << 19)
+#define MX25_ADCQ_CR_PDMSK (1 << 18)
+#define MX25_ADCQ_CR_FRST (1 << 17)
+#define MX25_ADCQ_CR_QRST (1 << 16)
+#define MX25_ADCQ_CR_RWAIT_MASK (0xf << 12)
+#define MX25_ADCQ_CR_RWAIT(x) ((x) << 12)
+#define MX25_ADCQ_CR_WMRK_MASK (0xf << 8)
+#define MX25_ADCQ_CR_WMRK(x) ((x) << 8)
+#define MX25_ADCQ_CR_LITEMID_MASK (0xf << 4)
+#define MX25_ADCQ_CR_LITEMID(x) ((x) << 4)
+#define MX25_ADCQ_CR_RPT (1 << 3)
+#define MX25_ADCQ_CR_FQS (1 << 2)
+#define MX25_ADCQ_CR_QSM_MASK 0x3
+#define MX25_ADCQ_CR_QSM_PD 0x1
+#define MX25_ADCQ_CR_QSM_FQS 0x2
+#define MX25_ADCQ_CR_QSM_FQS_PD 0x3
+
+/* ADCQ_SR (TCQSR and GCQSR) */
+#define MX25_ADCQ_SR_FDRY (1 << 15)
+#define MX25_ADCQ_SR_FULL (1 << 14)
+#define MX25_ADCQ_SR_EMPT (1 << 13)
+#define MX25_ADCQ_SR_FDN(x) (((x) >> 8) & 0x1f)
+#define MX25_ADCQ_SR_FRR (1 << 6)
+#define MX25_ADCQ_SR_FUR (1 << 5)
+#define MX25_ADCQ_SR_FOR (1 << 4)
+#define MX25_ADCQ_SR_EOQ (1 << 1)
+#define MX25_ADCQ_SR_PD (1 << 0)
+
+/* ADCQ_MR (TCQMR and GCQMR) */
+#define MX25_ADCQ_MR_FDRY_DMA (1 << 31)
+#define MX25_ADCQ_MR_FER_DMA (1 << 22)
+#define MX25_ADCQ_MR_FUR_DMA (1 << 21)
+#define MX25_ADCQ_MR_FOR_DMA (1 << 20)
+#define MX25_ADCQ_MR_EOQ_DMA (1 << 17)
+#define MX25_ADCQ_MR_PD_DMA (1 << 16)
+#define MX25_ADCQ_MR_FDRY_IRQ (1 << 15)
+#define MX25_ADCQ_MR_FER_IRQ (1 << 6)
+#define MX25_ADCQ_MR_FUR_IRQ (1 << 5)
+#define MX25_ADCQ_MR_FOR_IRQ (1 << 4)
+#define MX25_ADCQ_MR_EOQ_IRQ (1 << 1)
+#define MX25_ADCQ_MR_PD_IRQ (1 << 0)
+
+/* ADCQ_CFG (TICR, TCC0-7,GCC0-7) */
+#define MX25_ADCQ_CFG_SETTLING_TIME(x) ((x) << 24)
+#define MX25_ADCQ_CFG_IGS (1 << 20)
+#define MX25_ADCQ_CFG_NOS_MASK (0xf << 16)
+#define MX25_ADCQ_CFG_NOS(x) (((x) - 1) << 16)
+#define MX25_ADCQ_CFG_WIPER (1 << 15)
+#define MX25_ADCQ_CFG_YNLR (1 << 14)
+#define MX25_ADCQ_CFG_YPLL_HIGH 0
+#define MX25_ADCQ_CFG_YPLL_OFF (1 << 12)
+#define MX25_ADCQ_CFG_YPLL_LOW (3 << 12)
+#define MX25_ADCQ_CFG_XNUR_HIGH 0
+#define MX25_ADCQ_CFG_XNUR_OFF (1 << 10)
+#define MX25_ADCQ_CFG_XNUR_LOW (3 << 10)
+#define MX25_ADCQ_CFG_XPUL_OFF (1 << 9)
+#define MX25_ADCQ_CFG_XPUL_HIGH 0
+#define MX25_ADCQ_CFG_REFP_YP 0
+#define MX25_ADCQ_CFG_REFP_XP (1 << 7)
+#define MX25_ADCQ_CFG_REFP_EXT (2 << 7)
+#define MX25_ADCQ_CFG_REFP_INT (3 << 7)
+#define MX25_ADCQ_CFG_REFP_MASK (3 << 7)
+#define MX25_ADCQ_CFG_IN_XP 0
+#define MX25_ADCQ_CFG_IN_YP (1 << 4)
+#define MX25_ADCQ_CFG_IN_XN (2 << 4)
+#define MX25_ADCQ_CFG_IN_YN (3 << 4)
+#define MX25_ADCQ_CFG_IN_WIPER (4 << 4)
+#define MX25_ADCQ_CFG_IN_AUX0 (5 << 4)
+#define MX25_ADCQ_CFG_IN_AUX1 (6 << 4)
+#define MX25_ADCQ_CFG_IN_AUX2 (7 << 4)
+#define MX25_ADCQ_CFG_REFN_XN 0
+#define MX25_ADCQ_CFG_REFN_YN (1 << 2)
+#define MX25_ADCQ_CFG_REFN_NGND (2 << 2)
+#define MX25_ADCQ_CFG_REFN_NGND2 (3 << 2)
+#define MX25_ADCQ_CFG_REFN_MASK (3 << 2)
+#define MX25_ADCQ_CFG_PENIACK (1 << 1)
+
+
+#endif  /* _LINUX_INCLUDE_INPUT_IMX25_TSADC_H_ */
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux