Hi Rob,
On 27 April 2018 at 22:51, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, Apr 26, 2018 at 05:12:33PM +0800, Baolin Wang wrote:
>> From: Xiaotong Lu <xiaotong.lu@xxxxxxxxxxxxxx>
>>
>> This patch adds the binding documentation for Spreadtrum SC27xx series
>> vibrator device.
>>
>> Signed-off-by: Xiaotong Lu <xiaotong.lu@xxxxxxxxxxxxxx>
>> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
>> ---
>> Changes since v2:
>> - No updates.
>>
>> Changes since v1:
>> - No updates.
>> ---
>> .../bindings/input/sprd,sc27xx-vibra.txt | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
>>
>> diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
>> new file mode 100644
>> index 0000000..92ead29
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
>> @@ -0,0 +1,12 @@
>> +Spreadtrum SC27xx PMIC Vibrator
>> +
>> +Required properties:
>> +- compatible: should be "sprd,sc27xx-vibrator".
>> +- reg: address of vibrator control register.
>> +
>> +Example :
>> +
>> +vibrator@eb4 {
>> + compatible = "sprd,sc27xx-vibrator";
>> + reg = <0xeb4>;
>
> What bus is this on? A mmio bus needs a length. Is this part of some
> other block?
>
It's on one PMIC bus mapped by regmap-spi. Will add the PMIC part in
next version:
sc2731_pmic: pmic@0 {
compatible = "sprd,sc2731";
reg = <0>;
spi-max-frequency = <26000000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
#address-cells = <1>;
#size-cells = <0>;
vibrator@eb4 {
compatible = "sprd,sc27xx-vibrator";
reg = <0xeb4>;
};
};
Is that OK for you? Thanks.
--
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
