On Sun, Apr 29, 2018 at 3:47 PM, Paul Kocialkowski <contact@xxxxxxxx> wrote: > Hi, > > Le dimanche 22 avril 2018 à 19:22 +0200, Paul Kocialkowski a écrit : >> Are all CuBox-i units that have ever been sold supposed to have a >> connector with a CD line? I find it hard to believe that it's broken >> specifically on mine. > > Do you have a clue whether there should, in fact, be a CD line on all > CuBox-i models out there? Although you seemed to imply that my device > might be broken, I am still confused about whether this issue concerns > my device only or a specific revision of the CuBox-i. > >> If that's really needed, I could open up the device, check whether the >> R8 pull is in place and check the voltage there. > > In case there is a doubt, I will proceed with opening the device so we > can have a clear idea, but I'd rather avoid it as much as possible. > > Cheers, > > -- > Paul Kocialkowski, > > developer of free digital technology and hardware support. > > Website: https://www.paulk.fr/ > Coding blog: https://code.paulk.fr/ > Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/ Paul, You can see on our schematics that the hinged sdhc card slot is an assembly option and not the default. https://wiki.solid-run.com/lib/exe/fetch.php?media=imx6:cubox-i:schematics-rev-1.1:cubox-i-lower.pdf You have either an initial early developer unit (pre-production) that was assembled like this for testing, or a unit that someone specifically ordered assembled this way. You can see from the schematic that this option does not have a CD-pin because it is meant to be a more permanent storage option. That being said, this is not a default option and therefore should not be merged into the mainline device-tree. Our soms and carriers are designed to be very flexible regarding the assembly options and we try to mainline device-tree files that represent the most common assembly options. Once there is a common accepted mainlining for device-tree fragments for overlays, that would be the proper place to make this change. Although in this case you would also need a custom u-boot so it is probably best to just handle the change there. If you would like touch base with me off list and I can point you at the required u-boot changes. Thanks, Jon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
