2018-04-27 6:34 GMT+09:00 Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>:
> Hi Mita-san,
>
> On Thursday, 26 April 2018 19:17:55 EEST Akinobu Mita wrote:
>> 2018-04-26 7:40 GMT+09:00 Laurent Pinchart:
>> > On Wednesday, 25 April 2018 19:19:11 EEST Akinobu Mita wrote:
>> >> 2018-04-24 0:54 GMT+09:00 Akinobu Mita <akinobu.mita@xxxxxxxxx>:
>> >> > 2018-04-23 18:17 GMT+09:00 Laurent Pinchart:
>> >> >> On Sunday, 22 April 2018 18:56:07 EEST Akinobu Mita wrote:
>> >> >>> This adds a device tree binding documentation for OV7720/OV7725
>> >> >>> sensor.
>> >> >>>
>> >> >>> Cc: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
>> >> >>> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>> >> >>> Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>> >> >>> Cc: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
>> >> >>> Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
>> >> >>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> >> >>> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>> >> >>> Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
>> >> >>> Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
>> >> >>> ---
>> >> >>> * v3
>> >> >>> - Add Reviewed-by: lines
>> >> >>>
>> >> >>> .../devicetree/bindings/media/i2c/ov772x.txt | 42
>> >> >>> +++++++++++++++
>> >> >>> MAINTAINERS | 1 +
>> >> >>> 2 files changed, 43 insertions(+)
>> >> >>> create mode 100644
>> >> >>> Documentation/devicetree/bindings/media/i2c/ov772x.txt
>> >> >>>
>> >> >>> diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.txt
>> >> >>> b/Documentation/devicetree/bindings/media/i2c/ov772x.txt new file
>> >> >>> mode
>> >> >>> 100644
>> >> >>> index 0000000..b045503
>> >> >>> --- /dev/null
>> >> >>> +++ b/Documentation/devicetree/bindings/media/i2c/ov772x.txt
>> >> >>> @@ -0,0 +1,42 @@
>> >> >>> +* Omnivision OV7720/OV7725 CMOS sensor
>> >> >>> +
>> >> >>> +The Omnivision OV7720/OV7725 sensor supports multiple resolutions
>> >> >>> output,
>> >> >>> +such as VGA, QVGA, and any size scaling down from CIF to 40x30. It
>> >> >>> also
>> >> >>> can +support the YUV422, RGB565/555/444, GRB422 or raw RGB output
>> >> >>> formats. +
>> >> >>> +Required Properties:
>> >> >>> +- compatible: shall be one of
>> >> >>> + "ovti,ov7720"
>> >> >>> + "ovti,ov7725"
>> >> >>> +- clocks: reference to the xclk input clock.
>> >> >>> +- clock-names: shall be "xclk".
>> >> >>
>> >> >> As there's a single clock we could omit clock-names, couldn't we ?
>> >> >
>> >> > Sounds good.
>> >> >
>> >> > I'll prepare another patch that replaces the clock consumer ID argument
>> >> > of clk_get() from "xclk" to NULL, and remove the above line in this
>> >> > bindings.
>> >>
>> >> I thought it's easy to do. However, there is a non-DT user
>> >> (arch/sh/boards/mach-migor/setup.c) that defines a clock with "xclk" ID.
>> >>
>> >> This can be resolved by retrying clk_get() with NULL if no entry
>> >> with "xclk". But should we do so or leave as is?
>> >
>> > How about patching the board code to register the clock alias with
>> >
>> > clk_add_alias(NULL, "0-0021", "video_clk", NULL);
>>
>> Sounds good.
>>
>> But I'm a bit worried about whether clk_add_alias() can be called with
>> alias == NULL. I couldn't find such use case.
>
> There aren't many occurrences, but
>
> $ find . -type f -exec grep -l 'clk_add_alias(NULL' {} \;
> /drivers/clk/ti/clk.c
> /drivers/clk/ti/fixed-factor.c
> /drivers/clk/ti/clk-dra7-atl.c
> /drivers/clk/ti/composite.c
>
> A quick code analysis also shows me that this should be supported.
This hits ti_clk_add_alias() only. The function name is very similar,
but the first argument is struct device *.
Anyway, I'll add the change you suggested as Jacopo tested it.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
