Hi Rob, 2018-04-26 0:21 GMT+09:00 Rob Herring <robh@xxxxxxxxxx>: >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >> index 0dbd308..feb1cc33 100644 >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >> @@ -7,6 +7,27 @@ Required properties: >> - compatible: must be "snps,dwc3" >> - reg : Address and length of the register set for the device >> - interrupts: Interrupts used by the dwc3 controller. >> + - clock-names: should contain "ref", "bus_early", "suspend" >> + - clocks: list of phandle and clock specifier pairs corresponding to >> + entries in the clock-names property. >> + - resets: a single pair of phandle and reset specifier > > This should be optional as some SoCs don't have separate, s/w controlled > resets of modules. OK. I will move resets to optional property. Please let ask a question. The number of clocks should be the same across SoCs. (Even if there is no s/w control for clocks, we should input something such as clk-fixed-rate.) On the other hand, the number of resets can be different across SoCs. If there is no s/w control for resets, we can make it optional. (optional = 1 or 0 reset) Is this what you mean? If we had something like reset-nop (or reset-dummy) in case no s/w control, we would be able to input something. I am not sure if this is the right thing, though. > Otherise, for the DT binding: > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > -- Best Regards Masahiro Yamada -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
