于 2018年4月27日 GMT+08:00 上午12:45:38, Andre Przywara <andre.przywara@xxxxxxx> 写到:
>Hi,
>
>On 26/04/18 15:07, Icenowy Zheng wrote:
>> The Allwinner H6 SoC have 3 MMC controllers.
>>
>> Add device tree nodes for them.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
>> ---
>> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 56
>++++++++++++++++++++++++++++
>> 1 file changed, 56 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>> index 4debc3962830..3cbfc035c979 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>> @@ -124,12 +124,68 @@
>> interrupt-controller;
>> #interrupt-cells = <3>;
>>
>> + mmc0_pins: mmc0-pins {
>> + pins = "PF0", "PF1", "PF2", "PF3",
>> + "PF4", "PF5";
>> + function = "mmc0";
>> + drive-strength = <30>;
>> + bias-pull-up;
>> + };
>> +
>> + mmc2_pins: mmc2-pins {
>> + pins = "PC1", "PC4", "PC5", "PC6",
>> + "PC7", "PC8", "PC9", "PC10",
>> + "PC11", "PC12", "PC13", "PC14";
>> + function = "mmc2";
>> + drive-strength = <30>;
>> + bias-pull-up;
>> + };
>> +
>> uart0_ph_pins: uart0-ph {
>> pins = "PH0", "PH1";
>> function = "uart0";
>> };
>> };
>>
>> + mmc0: mmc@4020000 {
>> + compatible = "allwinner,sun50i-h6-mmc";
>
>This should be:
> compatible = "allwinner,sun50i-h6-mmc",
> "allwinner,sun50i-a64-mmc";
I'm intended to not add A64 compatible, as
H6 is a quite new design
(new process) and there might be different behavior, even on mmc0/1.
>
>> + reg = <0x04020000 0x1000>;
>> + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
>> + clock-names = "ahb", "mmc";
>> + resets = <&ccu RST_BUS_MMC0>;
>> + reset-names = "ahb";
>> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> +
>> + mmc1: mmc@4021000 {
>> + compatible = "allwinner,sun50i-h6-mmc";
>
>same here
>
>> + reg = <0x04021000 0x1000>;
>> + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
>> + clock-names = "ahb", "mmc";
>> + resets = <&ccu RST_BUS_MMC1>;
>> + reset-names = "ahb";
>> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> +
>> + mmc2: mmc@4022000 {
>> + compatible = "allwinner,sun50i-h6-emmc";
>
>and here:
> compatible = "allwinner,sun50i-h6-emmc",
> "allwinner,sun50i-a64-emmc";
MMC2 on H6 has EMCE capability, so surely there should
only be H6 compatible, and no A64 one.
>
>The rest looks correct to me.
>
>Cheers,
>Andre.
>
>> + reg = <0x04022000 0x1000>;
>> + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
>> + clock-names = "ahb", "mmc";
>> + resets = <&ccu RST_BUS_MMC2>;
>> + reset-names = "ahb";
>> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> +
>> uart0: serial@5000000 {
>> compatible = "snps,dw-apb-uart";
>> reg = <0x05000000 0x400>;
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
