On Tue, Apr 24, 2018 at 3:32 AM, Türk, Jan <Jan.Tuerk@xxxxxxxxxx> wrote:
>> -----Ursprüngliche Nachricht-----
>> Von: Shawn Guo Gesendet: Montag, 23. April 2018 10:45
>> Re: [PATCH v3 5/6] ARM: dts: Add support for emtrion emCON-MX6 series
>>
>> On Fri, Apr 20, 2018 at 02:50:52PM +0200, jan.tuerk@xxxxxxxxxxx wrote:
>> > From: Jan Tuerk <jan.tuerk@xxxxxxxxxxx>
>> >
>> > This patch adds support for the emtrion GmbH emCON-MX6 modules.
>> > They are available with imx.6 Solo, Dual-Lite, Dual and Quad equipped
>> > with Memory from 512MB to 2GB (configured by U-Boot).
>> >
>> > Our default developer-Kit ships with the Avari baseboard and the EDT
>> > ETM0700G0BDH6 Display (imx6[q|dl]-emcon-avari).
>> >
>> > The devicetree is split into the common part providing all module
>> > components and the basic support for all SoC versions
>> > (imx6qdl-emcon.dtsi) and parts which are i.mx6 S|DL and D|Q relevant.
>> > Finally the support for the avari baseboard in the developer-kit
>> > configuration is provided by the emcon-avari dts files.
>> >
>> > Signed-off-by: Jan Tuerk <jan.tuerk@xxxxxxxxxxx>
>> > ---
>> > Documentation/devicetree/bindings/arm/emtrion.txt | 13 +
>>
>> It's better to have a separate patch for bindings doc, which needs to be
>> acknowledged by DT maintainers.
>
> I can change that, but nobody complained in the first 2 revisions of the patch.
Well, sometimes I forget to mention what is step 1 in
Documentation/devicetree/bindings/submitting-patches.txt.
> Also I though having the documentation is required for merging new bindings?
Yes, so binding patches come first (step 3).
>> > arch/arm/boot/dts/Makefile | 2 +
>> > arch/arm/boot/dts/imx6dl-emcon-avari.dts | 224 ++++++
>> > arch/arm/boot/dts/imx6dl-emcon.dtsi | 27 +
>> > arch/arm/boot/dts/imx6q-emcon-avari.dts | 224 ++++++
>> > arch/arm/boot/dts/imx6q-emcon.dtsi | 27 +
>> > arch/arm/boot/dts/imx6qdl-emcon.dtsi | 838
>> ++++++++++++++++++++++
>> > 7 files changed, 1355 insertions(+)
>> > create mode 100644 Documentation/devicetree/bindings/arm/emtrion.txt
>> > create mode 100644 arch/arm/boot/dts/imx6dl-emcon-avari.dts
>> > create mode 100644 arch/arm/boot/dts/imx6dl-emcon.dtsi
>> > create mode 100644 arch/arm/boot/dts/imx6q-emcon-avari.dts
>> > create mode 100644 arch/arm/boot/dts/imx6q-emcon.dtsi
>> > create mode 100644 arch/arm/boot/dts/imx6qdl-emcon.dtsi
[...]
>> > + };
>> > +
>> > + boardID: pca8754a@3a {
>>
>> Please find a more generic node name for it.
>
> you mean boardID@3a?
No. "gpio@3a" as it is a gpio controller.
> This chip identifies the baseboard type for the bootloader.
>
>>
>> > + compatible = "nxp,pca8574";
>> > + reg = <0x3a>;
>> > + gpio-controller;
>> > + #gpio-cells = <1>;
>> > + };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
