@Thomas: Do you guys use this ?
On 25-04-18, 20:57, Rob Herring wrote:
> Remove LPC32xx and SPEAr ADC bindings in staging. They have not been
> touched since 2012.
>
> Cc: Roland Stigge <stigge@xxxxxxxxx>
> Cc: Stefan Roese <sr@xxxxxxx>
> Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
> Cc: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> Move these out of staging please or they are going to be removed.
>
> .../bindings/staging/iio/adc/lpc32xx-adc.txt | 16 -------------
> .../bindings/staging/iio/adc/spear-adc.txt | 26 ----------------------
> 2 files changed, 42 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
> delete mode 100644 Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
>
> diff --git a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
> deleted file mode 100644
> index b3629d3a9adf..000000000000
> --- a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -* NXP LPC32xx SoC ADC controller
> -
> -Required properties:
> -- compatible: must be "nxp,lpc3220-adc"
> -- reg: physical base address of the controller and length of memory mapped
> - region.
> -- interrupts: The ADC interrupt
> -
> -Example:
> -
> - adc@40048000 {
> - compatible = "nxp,lpc3220-adc";
> - reg = <0x40048000 0x1000>;
> - interrupt-parent = <&mic>;
> - interrupts = <39 0>;
> - };
> diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
> deleted file mode 100644
> index 02ea23a63f20..000000000000
> --- a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -* ST SPEAr ADC device driver
> -
> -Required properties:
> -- compatible: Should be "st,spear600-adc"
> -- reg: Address and length of the register set for the device
> -- interrupt-parent: Should be the phandle for the interrupt controller
> - that services interrupts for this device
> -- interrupts: Should contain the ADC interrupt
> -- sampling-frequency: Default sampling frequency
> -
> -Optional properties:
> -- vref-external: External voltage reference in milli-volts. If omitted
> - the internal voltage reference will be used.
> -- average-samples: Number of samples to generate an average value. If
> - omitted, single data conversion will be used.
> -
> -Examples:
> -
> - adc: adc@d8200000 {
> - compatible = "st,spear600-adc";
> - reg = <0xd8200000 0x1000>;
> - interrupt-parent = <&vic1>;
> - interrupts = <6>;
> - sampling-frequency = <5000000>;
> - vref-external = <2500>; /* 2.5V VRef */
> - };
> --
> 2.14.1
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
