On 23/04/2018 17:49, Geert Uytterhoeven wrote:
Hi Grant,
On Mon, Apr 23, 2018 at 4:47 PM, Grant Likely <grant.likely@xxxxxxx> wrote:
On 21/04/2018 02:28, Rob Herring wrote:
On Fri, Apr 20, 2018 at 4:00 PM, Frank Rowand <frowand.list@xxxxxxxxx>
wrote:
+ interrupts:
+ # Either 1 or 2 interrupts can be present
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: tx or combined interrupt
+ - description: rx interrupt
+
+ description: |
+ A variable number of interrupts warrants a description of what
conditions
+ affect the number of interrupts. Otherwise, descriptions on
standard
+ properties are not necessary.
+
+ interrupt-names:
+ # minItems must be specified here because the default would be 2
+ minItems: 1
Why the difference between the interrupts property and the
interrupt-names
property (specifying maxItems for interrupt, but not interrupt-names)?
I should probably have maxItems here too.
Others have already commented on a desire to have a way to specify that
number of interrupts should match number of interrupt-names.
Yeah, but I don't see a way to do that. You could stick the array size
constraints in a common definition and have a $ref to that definition
from both, but that doesn't really save you too much.
There has been discussions in the jsonschema community regarding
referencing data in the document when applying the schema.
https://github.com/json-schema-org/json-schema-spec/issues/549
However, those discussions are ongoing and have been pushed back to
after draft-8 (the current release is draft-7). We can instead define
DT-specific keywords and extend the validator to make it do what we
want. We need to do something very similar to validate that the length
of tuples in 'reg', 'interrupts', and '*gpios' match the '#*-cells' values.
Checking that property lengths match the corresponding #*-cells cannot
be done for a schema, but only for the final DTS, as #*-cells is a property
of the target node, right?
It can be done in the schema checking of the target node. For example,
given a GPIO specifier of:
gpios = <&gpio1 0> <&gpio2 4 1> <&gpio2 3 0>;
The validation engine could validate that the &gpio1 and &gpio2 targets
have the same length as the associated gpio descriptor tuples. (ex.
gpio1 needs #gpio-cells=<1>; and gpio2 needs #gpio-cells=<2>; If the
tuples are the wrong size, then validation should fail.
g.
Gr{oetje,eeting}s,
Geert
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
